Extron SF 3CT LP Template

Red solid lines are die cut.

Template Material Thickness = 0.015” (0.38 mm)

Black Ink

Finished size = 7.6” (193 mm) ceiling cutout diameter

68-2845-50 Rev. A

09 15

Important Note: Print 1:1 only.

Do not scale.

7.6" (193 mm) cutout diameter

Center hole = 0.375” (9.5 mm) diameter

SF 3C LP and

SF 3CT LP

1. Mark the location where the speaker

will be centered and installed.

2. Align the center hole of the template

with the mark.

3. Trace a circle around the cutout template.

4. Cut out the traced circle.

Cutout Template Instructions

Cutout Template

This manual is also suitable for

Download PDF