2. Extron
  3. SF 26X

Extron SF 26X Template

  • Hello! I am an AI chatbot trained to assist you with the Extron SF 26X Template. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Red solid lines are die cut.
Template Material Thickness = 0.015” (0.38 mm)
Black Ink
Finished size = 7.6” (194 mm) ceiling cutout diameter
68-2499-01 Rev. A
08 13
Important Note: Print 1:1 only.
Do not scale.
7.6" (194 mm) cutout diameter
Center hole = 0.375” (9.5 mm) diameter
SF 26X
Cutout Template
1. Mark the location where the speaker
will be centered and installed.
2. Align the center hole of the template
with the mark.
3. Trace a circle around the cutout template.
4. Cut out the traced circle.
Cutout Template Instructions
/