Extron SF 26CT Template

Red solid lines are die cut.

Template Material Thickness = 0.015" (0.38 mm)

Black Ink

Finished size = 9.30" (236 mm) ceiling cutout diameter

68-2844-50 Rev. A

09 16

Important Note: Print 1:1 only.

Do not scale.

9.30" (236 mm) cutout diameter

Center hole = 0.375" (9.5 mm) diameter

SF 26CT

1. Mark the location where the speaker

will be centered and installed.

2. Align the center hole of the template

with the mark.

3. Trace a circle around the cutout template.

4. Cut out the traced circle.

Cutout Template Instructions

Cutout Template