Troy-Bilt 12A446A011 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
12A446A011
Type
Fast Start Guide

This manual is also suitable for

Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help? Call 1-888-TO-HELP-U (1-888-864-3578)
Lea el manual de operación anexo sobre ensamblaje e inicio.
Lift handle to extended position.
Tighten star knobs.
1
Move hairpin clip to inside hole. Insert carriage bolt
and tighten with wing nut. Repeat on opposite side.
2
Secure cable to lower handle with cable tie
provided with unit.
3
4
Refer to Operator’s Manual for instructions on attaching the grass catcher.
Starter
Rope
Blade Control Handle
Hold blade control handle against upper handle.
Slowly slip starter rope into rope guide.
Tighten rope guide wing knob.
Star Knobs
778-10608D
12A-446A011
12A-446C211
A
B
A
B
A
C
D
B
© 2006
Read and understand all instruction, warning, and danger labels.
IMPORTANT: READ OPERATOR'S MANUAL AND ENGINE MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Need Help?
Call 1-888-TO-HELP-U
Lea el manual de operación anexo sobre ensamblaje e inicio.
Fill tank with gas to within 1/2 inch of top of tank.
Fill engine with entire contents of oil bottle supplied
with your mower.
5
6
Push primer ve times.
7
Gas Cap
Oil Fill
Primer
Depress blade control handle and hold.
Pull starter rope with quick, full arm stroke.
If engine does not start after ve pulls,
repeat steps 7 through 9.
9
8
  • Page 1 1
  • Page 2 2

Troy-Bilt 12A446A011 Fast Start Guide

Troy-Bilt
Brand
Troy-Bilt
Model
12A446A011
Type
Fast Start Guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents