Symantec WISESCRIPT EDITOR 7.0 SP2 Installation guide

Category
Software
Type
Installation guide
WiseScript Editor Reference
WiseScript Editor Reference 2
WiseScript Editor
The software described in this book is furnished under a license agreement and may be used only in accordance with the terms of the
agreement.
Documentation version 7.0 SP2 in Wise Installation Express and 8.0 in Wise Package Studio
Legal Notice
Copyright © 2010 Symantec Corporation. All rights reserved.
Symantec, the Symantec Logo, and Altiris are trademarks or registered trademarks of Symantec Corporation or its affiliates in the U.S. and
other countries. Other names may be trademarks of their respective owners.
The product described in this document is distributed under licenses restricting its use, copying, distribution, and decompilation/reverse
engineering. No part of this document may be reproduced in any form by any means without prior written authorization of Symantec
Corporation and its licensors, if any.
THE DOCUMENTATION IS PROVIDED “AS IS” AND ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND WARRANTIES,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT, ARE
DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD TO BE LEGALLY INVALID. SYMANTEC CORPORATION SHALL NOT
BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IN CONNECTION WITH THE FURNISHING, PERFORMANCE, OR USE OF THIS
DOCUMENTATION. THE INFORMATION CONTAINED IN THIS DOCUMENTATION IS SUBJECT TO CHANGE WITHOUT NOTICE.
The Licensed Software and Documentation are deemed to be commercial computer software as defined in FAR 12.212 and subject to
restricted rights as defined in FAR Section 52.227-19 “Commercial Computer Software - Restricted Rights” and DFARS 227.7202, “Rights in
Commercial Computer Software or Commercial Computer Software Documentation”, as applicable, and any successor regulations. Any use,
modification, reproduction release, performance, display or disclosure of the Licensed Software and Documentation by the U.S. Government
shall be solely in accordance with the terms of this Agreement.
Symantec Corporation
350 Ellis Street
Mountain View, CA 94043
http://www.symantec.com
WiseScript Editor Reference 3
Technical Support
Symantec Technical Support maintains support centers globally. Technical Support’s
primary role is to respond to specific queries about product features and functionality.
The Technical Support group also creates content for our online Knowledge Base. The
Technical Support group works collaboratively with the other functional areas within
Symantec to answer your questions in a timely fashion. For example, the Technical
Support group works with Product Engineering and Symantec Security Response to
provide alerting services and virus definition updates.
Symantec’s maintenance offerings include the following:
z A range of support options that give you the flexibility to select the right amount of
service for any size organization
z Telephone and/or web-based support that provides rapid response and up-to-the-
minute information
z Upgrade assurance that delivers software upgrades
z Global support purchased on a regional business hours or 24 hours a day, 7 days a
week basis
z Premium service offerings that include Account Management Services
For information about Symantec’s support offerings, you can visit our web site at the
following URL:
www.symantec.com/business/support/
All support services will be delivered in accordance with your support agreement and the
then-current enterprise technical support policy.
Contacting Technical Support
Customers with a current maintenance agreement may access Technical Support
information at the following URL:
www.symantec.com/business/support/
Before contacting Technical Support, make sure you have satisfied the system
requirements that are listed in your product documentation. Also, you should be at the
computer on which the problem occurred, in case it is necessary to replicate the
problem.
When you contact Technical Support, please have the following information available:
z Product release level
z Hardware information
z Available memory, disk space, and NIC information
z Operating system
z Version and patch level
z Network topology
z Router, gateway, and IP address information
z Problem description:
Error messages and log files
WiseScript Editor Reference 4
Troubleshooting that was performed before contacting Symantec
Recent software configuration changes and network changes
Licensing and registration
If your Symantec product requires registration or a license key, access our technical
support Web page at the following URL:
www.symantec.com/business/support/
Customer service
Customer service information is available at the following URL:
www.symantec.com/business/support/
Customer Service is available to assist with non-technical questions, such as the
following types of issues:
z Questions regarding product licensing or serialization
z Product registration updates, such as address or name changes
z General product information (features, language availability, local dealers)
z Latest information about product updates and upgrades
z Information about upgrade assurance and maintenance contracts
z Information about the Symantec Buying Programs
z Advice about Symantec’s technical support options
z Nontechnical presales questions
z Issues that are related to CD-ROMs or manuals
Support agreement resources
If you want to contact Symantec regarding an existing support agreement, please
contact the support agreement administration team for your region as follows:
Additional enterprise services
Symantec offers a comprehensive set of services that allow you to maximize your
investment in Symantec products and to develop your knowledge, expertise, and global
insight, which enable you to manage your business risks proactively.
Enterprise services that are available include the following:
Asia-Pacific and Japan [email protected]
Europe, Middle-East, and Africa [email protected]
North America and Latin America [email protected]
WiseScript Editor Reference 5
To access more information about Enterprise services, please visit our Web site at the
following URL:
www.symantec.com/business/services/
Select your country or language from the site index.
Managed Services Managed services remove the burden of managing and
monitoring security devices and events, ensuring rapid response
to real threats.
Consulting
Services
Symantec Consulting Services provide on-site technical
expertise from Symantec and its trusted partners. Symantec
Consulting Services offer a variety of prepackaged and
customizable options that include assessment, design,
implementation, monitoring, and management capabilities. Each
is focused on establishing and maintaining the integrity and
availability of your IT resources.
Educational
Services
Educational Services provide a full array of technical training,
security education, security certification, and awareness
communication programs.
WiseScript Editor Reference 7
Contents
Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
About WiseScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
WiseScript Benefits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Starting the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
The Product Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Using WiseScripts in a Windows Installer Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Compiling, Testing, and Running a WiseScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Creating a Portable Project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Product Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Chapter 2: Project Settings for Script Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
About Project Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
About the Project Settings View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Compiler Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Digital Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Chapter 3: Using Script Editor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
About Script Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
The Script Editor Window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Customizing the List of Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Types of Scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Adding an Action to a Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Editing Scripts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Finding and Replacing Text in a Script. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
About User-Defined Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Creating a User-Defined Action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Creating a User-Defined Action: Tutorial . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Basic Scripting Concepts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Conditions and Loops . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Variables and Expressions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Compiler Variables and Run-time Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Anatomy of an Installation Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Chapter 4: WiseScript Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
About WiseScript Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
About SVS Script Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Activate SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Add Directory to PATH. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Add File to SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Add Text to INSTALL.LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Add to AUTOEXEC.BAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Add to CONFIG.SYS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Add to SYSTEM.INI. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
WiseScript Editor Reference 8
Browse for Directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Call DLL Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
DLL Parameter Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Passing Complex Structures to a .DLL: An Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Capture Application to SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Change SVS Layer GUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Check Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Check Disk Space. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Check HTTP Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Check If File/Dir Exists . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Check In-use File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Check Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Compiler Variable Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Config ODBC Data Source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Copy Local File(s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Create Directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Create Directory in SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Create Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Create Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Create Shortcut in SVS Layer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Create SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Create Virtual Directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Custom Billboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Custom Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Deactivate SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Delete File from SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Delete File(s). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Delete SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
Display Billboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Display Message. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Display Progress Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Display Text File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Edit INI File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Edit Registry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Registry Key Settings Dialog Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Edit Registry for SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
Else Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
ElseIf Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
End Statement. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Evaluate Windows Installer Condition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Execute Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Execute VBScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Editing a VBScript. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
VBScript Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Calling a COM Object in a VBScript. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Exit Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
Export SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Find File in Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Find First SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Find Next SVS Layer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Find SVS Layer GUID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Get Environment Variable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Get Name/Serial Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Get Registry Key Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
WiseScript Editor Reference 9
Get SVS Layer Info. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Get System Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Get Temporary Filename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Get Windows Installer Property . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Halt Compilation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
If Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Import SVS Layer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Include Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Initialize SVS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Insert Line Into Text File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Install File(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Install SVS Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Install WiseUpdate Client. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
About Windows Mobile Installations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Process for Adding Mobile Device Support to a WiseScript . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Install Windows Mobile Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Modify Component Size. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Open/Close Install.log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Parse String. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101
Play Multimedia File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Post to HTTP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Prompt for Filename . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Prompt for Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Radio Button Dialog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Read INI Value. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Read/Update Text File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Read/Write Binary File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
Reboot System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Register Font . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Remark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
Remove SVS Exclude Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Rename File/Directory. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Rename File or Directory in SVS Layer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Rename SVS Layer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Search for File . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Self-Register OCXs/DLLs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Set Activate SVS Layer on Startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Set Control Attributes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Set Control Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Set Current Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Set File Attributes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Set Files/Buffers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Set SVS Exclude Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Set Variable. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
Set Web Permissions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Set Windows Installer Property . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
Start/Stop Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
While Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
Win32 System Directory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Wizard Loop. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Chapter 5: Creating Custom Dialog Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
About Dialog Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
WiseScript Editor Reference 10
About the Custom Dialog Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Adding a Dialog Box to the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Editing Dialog Boxes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
Setting Dialog Box Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 121
About Dialog Box Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Adding and Editing Dialog Box Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
Adding Check Box Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124
Adding Combo Box Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
Adding Edit Text Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Adding Graphic Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Adding Group Box Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129
Adding Hot Text Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
Adding List Box Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Adding Play AVI Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Adding Push Button Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
Adding Radio Button Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
Adding Rectangle Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Adding Text Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Specifying Execute Program Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Aligning and Spacing Dialog Box Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Setting Tab Order of Dialog Box Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
Solutions for Dialog Box Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
Changing the Default Graphic on Wizard Dialog Boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Keeping Disabled Controls From Reactivating. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
About Custom Dialog Box Sets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Creating a Dialog Box Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Configuring Dialog Box Set Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
Creating a Custom Dialog Box Script . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144
Dialog Box Script Actions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Dialog Box Script Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
Chapter 6: Creating Custom Billboards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
About Billboards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Accessing the Custom Billboard Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
About the Custom Billboard Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Opening and Saving Custom Billboards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Adding Objects to a Billboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Editing Billboard Text Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
Editing Billboard Line Objects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
Editing Billboard Rectangles and Ellipses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Editing Billboard Polygon Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
Editing Billboard Bitmap Objects. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
Resizing, Moving, and Aligning Billboard Objects . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Setting Billboard Properties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
Chapter 7: Troubleshooting WiseScripts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
About Troubleshooting a WiseScript . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Using the Installation Log . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
File Replacement Problems in System32 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155
Chapter 8: Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Automatic Compiler Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157
Automatic Run-time Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
Run-time Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160
WiseScript Editor Reference 11
SVS Variables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162
Expression Operators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164
Command-Line Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
WiseScript Command-Line Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166
WiseScript Installations Command-Line Options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Uninstall Command-Line Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 167
Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169
WiseScript Editor Reference 12
Chapter 1
Introduction
This chapter includes the following topics:
z About WiseScript on page 12
z WiseScript Benefits on page 12
z Starting the Software on page 13
z The Product Interface on page 14
z Using WiseScripts in a Windows Installer Installation on page 14
z Compiling, Testing, and Running a WiseScript on page 15
z Product Documentation on page 16
About WiseScript
WiseScript Editor is a WiseScript™ authoring environment that you can use to automate
administrative tasks. You also can use it to create .EXEs to use as custom actions in
Windows Installer installations. These custom actions can extend the capabilities of
Microsoft Windows Installer and simplify installation tasks (example: parsing and
arithmetic functions) that are difficult to accomplish with Windows Installer.
WiseScript Editor is embedded within Windows Installer Editor and appears when you
create a custom action that calls a WiseScript.
WiseScript Benefits
WiseScript is a high-level scripting language that consolidates dozens or hundreds of
lines of code into predefined script actions.
What Makes WiseScript Unique
z Easy to learn
WiseScript supports a point-and-click method of scripting. The script author is
prompted for the parameters needed by each script action, so a script can be
created and tested very quickly. The script is displayed in clear, English-like
statements. For those who need additional flexibility and control, WiseScript
provides advanced features (examples: IF blocks, WHILE loops, UI dialog boxes).
z No runtime needed
WiseScripts are compiled into self-contained .EXEs that do not require an agent or
runtime files on the destination computer.
z Compact size
A WiseScript .EXE is small in size (about 100 KB). If a script uses any files that may
not be on the destination computer, it can compress those files into the .EXE.
(Example: A script that detects and removes spyware might temporarily install
Kill.exe on the destination computer while the script is running.)
WiseScript Editor Reference 13
Introduction
z Built-in rollback
WiseScripts can be rolled back after they are executed on the destination computer.
z User interface
WiseScripts can incorporate any type of dialog box to either inform the end user or
prompt for input.
z WiseScript is powerful
In addition to the dozens of predefined actions, WiseScripts can call VBScripts and
DLL functions, making it possible to use any Windows system call.
z WiseScript is fast
Because the WiseScript engine is written in C++, when you build a WiseScript, you
are building a C++ program. A WiseScript executes faster than a VBScript that
performs the same operation.
z WiseScript is extensible
You can streamline your scripting process by creating your own script actions for
tasks that you perform frequently. To create a user-defined action, create a
WiseScript .WSE (project file) and save it in the Actions subdirectory of the
WiseScript product’s installation directory. Your action will be available for use in
future scripts.
WiseScript Examples
In addition to creating installation packages, following are just a few of the tasks you
can accomplish with WiseScript. For samples of some of these scripts, see the article
Performing System Administration Tasks With WiseScripts in the Altiris Knowledgebase
(Article #27374).
z Move files and directories.
z Modify a machine resource (example: registry key or .INI file).
z Locate and delete a file and its directory (example: to remove a spyware program).
z Free disk space by clearing the Temp directory, the Recycle Bin, or the Internet
cache.
z Find the current Windows version.
z Find and report system information and take action depending on the results.
z Map a network drive.
z Create, edit, or manage virtual software layers on computers that have the SVS
Driver (Software Virtualization Agent). For details, see the article Using WiseScripts
to Manage and Update Virtual Software Packages in the Altiris Knowledgebase
(article 27373).
z Assign license numbers from a text file.
Starting the Software
The WiseScript Editor interface is embedded within MSI Script in Windows Installer
Editor. This lets you create WiseScripts for Windows Installer custom actions.
In MSI Script, add or double-click a custom action that runs a WiseScript. On the Details
tab of the Run WiseScript dialog box, click Options.
z To open a blank script, select Create New WiseScript from the button menu.
WiseScript Editor Reference 14
Introduction
z To open an existing script, select Edit Existing WiseScript from the button menu.
You can begin to add or edit script actions.
For information on adding script actions, see Adding an Action to a Script on page 26.
For a description of each script action, see About WiseScript Actions on page 40.
See also:
About Script Editor on page 22
The Product Interface
WiseScript Editor has the following views:
z Project Settings
The Project Settings view contains several pages that provide information that is
required by certain script actions.
See About the Project Settings View on page 17.
z Script Editor
Script Editor provides a powerful and easy-to-use scripting environment based on
the WiseScript™ scripting language.
See About Script Editor on page 22.
Script Editor lets you create powerful .EXEs to use as custom actions in a Windows
Installer installation.
To navigate between views, click the navigation tabs at the lower left of the main
window.
Using WiseScripts in a Windows Installer
Installation
Windows Installer Editor compiles installations into Windows Installer (.MSI) format.
Therefore, it can provide only those capabilities that are provided by the Windows
Installer SDK environment. WiseScript Editor provides an additional authoring
environment that has a larger selection of more versatile script actions than those
provided by Windows Installer products.
You can use WiseScript-based .EXEs in the same way that you use functions in .DLLs.
You write the main installation in a Windows Installer product, but when you need to
perform an advanced function, you can create a WiseScript .EXE and call it with a
custom action in the Windows Installer installation.
Creating a WiseScript .EXE has some advantages over writing a custom program to
create an .EXE:
z WiseScript Editor uses predefined, easy-to-use script actions to accomplish common
installation tasks.
z You can pass Windows Installer properties in and out of the WiseScript .EXE.
See Get Windows Installer Property on page 90 and Set Windows Installer Property
on page 116.
z You can evaluate Windows Installer conditions within a WiseScript .EXE.
WiseScript Editor Reference 15
Introduction
See Evaluate Windows Installer Condition on page 77.
The disadvantage of using a WiseScript .EXE is that Windows Installer does not know
about or manage system changes performed by a WiseScript .EXE (example: installation
of a file).
See Uninstalling Changes Made by a WiseScript in the Windows Installer Editor Help.
Compiling, Testing, and Running a WiseScript
To test an installation, use the Compile, Test, and Run buttons at the bottom of the main
window.
z Compile
Click Compile to build a single executable file that contains the installation script as
well as all the files needed for the installation. This is the installation .EXE that you
distribute to end users. If any files are absent or not readable, error messages
appear when compiling.
z Test
Click Test to compile and run the installation in test mode. In test mode, the
installation performs all script actions without actually installing or modifying files.
However, if any script lines are dependent on files being installed by previous script
lines, then test mode might fail. Example: If an Install File(s) line copies a ReadMe
to the Temp directory and a second script line tries to open ReadMe, the second
script line fails because the ReadMe is not in the Temp directory.
z Run
Click Run to execute the installation just as it would execute on the destination
computer. Files are installed on your computer and your system is modified.
Creating a Portable Project
You can create a portable WiseScript project that contains all of the files in a WiseScript
including its source files. A portable project is a self-extracting .EXE. Use it to:
z Easily move WiseScript projects from one computer to another without having to
copy source files.
z Share WiseScript projects with others, who can then open and edit your WiseScript
with all of its source files.
To create a portable project
1. Select File menu > Create Project Package.
2. Complete the Create Project Package dialog box:
Project Name
Enter a name for the portable project. When the portable project .EXE is run, it
extracts the project’s files and puts them in a directory with this name.
Add default scripts that are included in this WiseScript
Mark this to add any default WiseScripts or VBScripts that are included in the
WiseScript. These default scripts are in the WiseScript Editor\Actions or
WiseScript Editor\Include directories. If you have modified these scripts and
they are included in the WiseScript, then you should include them in the project
WiseScript Editor Reference 16
Introduction
Password protect the project package
To add password protection to the project, mark this option and then enter and
confirm the password.
3. Click OK.
The Save As dialog box appears.
4. Specify the file name and location for the portable WiseScript project and click Save.
Product Documentation
This documentation assumes that you are proficient in the use of the Windows operating
system. If you need help using the operating system, consult its user documentation.
Use the following sources of information to learn about this product.
Online Help
The online help contains detailed technical information and step-by-step instructions for
performing common tasks.
Access help in the following ways:
z To display context-sensitive help for the active window or dialog box, press F1.
z To select a help topic from a table of contents, index, or search, select Help menu >
Help Topics.
Reference Manual
All the material in the online help is also available in a .PDF-format reference manual,
which you can access by selecting Help menu > Reference Manual.
Getting Started Guide
The Getting Started Guide contains system requirements and installation instructions.
You can access a .PDF version of the Getting Started Guide from the Windows Start
menu.
Release Notes
The product release notes cover new features, enhancements, bug fixes, and known
issues for the current version of this product. To access the release notes, select Release
Notes from the Symantec program group on the Windows Start menu.
WiseScript Editor Reference 17
Chapter 2
Project Settings for Script Support
This chapter includes the following topics:
z About Project Settings on page 17
z About the Project Settings View on page 17
z Compiler Variables on page 18
z Digital Signature on page 20
z General Information on page 21
About Project Settings
Several script actions require information that is defined outside Script Editor. The
Project Settings view provides pages on which you can define that information.
See About the Project Settings View on page 17.
See also:
Compiler Variables on page 18
Digital Signature on page 20
General Information on page 21
About the Project Settings View
The Project Settings view contains several pages that provide information that is
required by certain script actions. (Example: The Compiler Variable If action requires a
compiler variable to be defined on the Compiler Variables page.)
To access Project Settings, click Project Settings at the lower left of the WiseScript Editor
main window.
WiseScript Editor Reference 18
Project Settings for Script Support
Page Area
When you click a page name in a page group, this area displays the page’s options. Each
page lets you define information that is required by a specific script action.
z Use ( ) on the toolbar to navigate from page to page, or click the page name in
the list of pages.
z To display help for the current page, press F1.
z To return a page to its last saved state, select Edit menu > Reset Page.
View Navigation
Click these tabs to change views.
Compiling and Testing
Compile, Test, Debug, and Run buttons test and compile the WiseScript.
Compiler Variables
Use the Compiler Variables page to set compiler variables that change the WiseScript
during compile. You can use compiler variables to include or exclude portions of script
from the compiled .EXE or to build a debug version of the WiseScript.
You set the default value of compiler variables on the Compiler Variables page, and then
you select the compiler variables in the Compiler Variable If action in Script Editor.
Page Area
Page Groups
Compile, Test, and Run
View Navigation
WiseScript Editor Reference 19
Project Settings for Script Support
Compiler variables are surrounded by % characters in the script. (Example:
%_DEBUG_%)
You can change the value of compiler variables when you compile.
The sample script Compvar.wse uses compiler variables. For details on sample scripts,
see ScriptHelp.htm in the Samples subdirectory of this product’s installation directory.
To add a compiler variable
1. Select Project Settings > Compiler Variables page.
2. Click Add.
The Compiler Variable Settings dialog box appears.
3. Complete the dialog box:
Variable Name
Enter the name of the compiler variable. By convention, compiler variables
begin and end with an underscore character (_). Although this convention is not
enforced, it helps distinguish compiler variables from regular variables in
scripts.
Default Value
Enter the default value of the compiler variable.
Description
Briefly describe how the variable is used. This appears on the dialog box when
you are asked to choose a value for the variable.
Value List
For compiler variables that are displayed as a list, enter a list of valid values,
each on a separate line.
Data Entry Type
Select the method to use to enter data for the compiler variable.
Do Not Prompt for Value
If this is marked, you are not prompted for the value of this variable when
compiling even if Prompt for Compiler Variables is marked on the Compiler
Variables page. Mark this for variables that you do not expect to change
frequently.
4. Click OK.
5. On the Compiler Variables page, mark one of the following:
Compiling from Command Line
Mark this to be prompted for the value of compiler variables when you compile
from the command line. Use this for automated build processes. You can specify
compiler variable values by entering the value directly on the command line or
by storing the values in a text file.
See Command-Line Options on page 166.
Compiling from Within Wise
Mark this to be prompted for the value of compiler variables when you compile
from WiseScript Editor. If you mark this, then a Select Compile Settings dialog
box appears during compile and lists this compiler variable’s values. A dialog
box appears for each compiler variable you define. Value length is limited by the
amount of text that displays on the dialog box. The Do not prompt for value
check box on the Compiler Variable Settings dialog box overrides this setting.
WiseScript Editor Reference 20
Project Settings for Script Support
See also:
Automatic Compiler Variables on page 157
Digital Signature
Use the Digital Signature page to add an Authenticode digital signature to an installation
file so its integrity and authenticity can be verified.
Digital signature methods
The file signing tool that is used to digitally sign a file depends on the type of your digital
certificate:
z Public/private key pair files
This method requires a credentials file (.SPC or .CER) and a private key file (.PVK).
This method is supported by the signcode.exe tool. For details, search for
“Signcode” in the MSDN Library (msdn.microsoft.com/library/).
z Personal Information Exchange file
This method requires a Personal Information Exchange file (.PFX), which is a
container file for the public/private key information. This method is supported by the
signtool.exe tool. For details, search for “Signtool” in the MSDN Library
(msdn.microsoft.com/library/).
Requirements
z You must have a valid code signing certificate, which you can obtain from a
commercial certificate authority such as Verisign. For a list of certificate authorities,
search for “Microsoft Root Certificate Program Members” in the MSDN Library
(msdn.microsoft.com/library/).
z You must have the signtool.exe or signcode.exe tool on your computer.
z Signtool.exe requires the CAPICOM 2.0 redistributable to be installed and registered
on your computer. CAPICOM provides services for digitally signing applications, and
is available from the Microsoft Web site.
z The location of signtool.exe or signcode.exe must be added to your Path
environment variable.
To add a digital signature
Select Project Settings > Digital Signature and complete the page.
z Add a digital signature externally
Mark this to leave space in the installation for a digital signature without actually
adding it to the installation. This is useful if the installation must be digitally signed
under a higher security environment by a different individual. Extra space is
reserved to allow for the digital signature information. If an installation does not
have extra space (approximately 5 K), and a digital signature is added, errors occur
when CRC checks are performed because of the resulting size increase. This option
eliminates those errors.
z Add a digital signature
Mark this to add a digital signature to the installation and to enable the following
fields:
WiseScript Editor Reference 21
Project Settings for Script Support
Web URL
Enter your company’s Web site address.
Descriptive Name
Enter the name of your application. This name is embedded in your
Authenticode certificate to let end users verify the name of the application they
are installing.
TimeStamp URL
Specify the URL you use for your timestamping service. Timestamping lets end
users distinguish between a certificate that has expired but was valid when it
was used to sign the installation, and a certificate that was used to sign an
installation while it was expired. The timestamping service must be available on
your computer to build the installation but does not need to be available to the
end user running the installation.
z Certificate options
Signtool.exe with Personal Information Exchange file
Mark this to use signtool.exe and then specify the Personal Information
Exchange file (.PFX) to use.
Signcode.exe with public/private key pair files
Mark this to use signcode.exe and then specify the credentials file (.SPC or
.CER) that contains your Digital ID, and your private key file (.PVK).
General Information
Use the General Information page to set the summary information for the compiled .EXE
file. End users can see the summary information by right-clicking the compiled .EXE in
Windows Explorer and selecting Properties.
If you plan to use an automated build system and want to set these values at compile
time, create compiler variables to set these values, and enter the compiler variable
name, surrounded by percent signs, in these fields. (Example: If you create a compiler
variable named _INST_VERSION_ to set the version, enter %_INST_VERSION_% in the
Installation Version field.)
See Compiler Variables on page 18.
Select Project Settings > General Information and complete the page.
z Installation Version
The version number of the WiseScript.
z Description
A description of the WiseScript, perhaps including your application’s name.
z Copyright
The copyright notice for the WiseScript.
z Company Name
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166
  • Page 167 167
  • Page 168 168
  • Page 169 169
  • Page 170 170
  • Page 171 171
  • Page 172 172
  • Page 173 173
  • Page 174 174

Symantec WISESCRIPT EDITOR 7.0 SP2 Installation guide

Category
Software
Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI