WIRELESS RECEIVER---TFT2500RX
1.ANTENNA
Receives the audio and video signals.
2. POWER INDICATOR
The LED is lit when the power provided.
3.TFT LCD SCREEN
Displays the pictures on the screen.
4.SCREEN ON/OFF BUTTON
Turn off the screen power by pressing this button to extend the
battery’s lifetime, in case you wish to listen to sound only from the
wireless cameras.
5.VIDEO OUTPUT
Connect the supplied cable to the video output jack on the
receiver and the other end to TV’ s or monitor’s video input to get
more clear pictures.
6.SPEAKER
Listen to sound from the wireless cameras.
7. DC IN JACK
Plug the 8V adapter (Supplied).
8.AUDIO VOLUME
Adjust the proper sound with this knob.
9.BRIGHTNESS
Adjust the proper brightness with this knob.
10.CHANNEL SELECTION BUTTON
Find optimal reception by pressing this button continuously. Must
select the same channel on both transmitter and receiver.
11.POWER SWITCH
Turn the power On/ Off
12.EARPHONE JACK
Plug the supplied earphone into the jack.
13.MODE SWITCH
Refer to OPERATION section.
14.STAND
Fold over and out.