H A R D W A R E I N S TA L L AT I O N
Take the following precautions before installing the hardware:
Ensure that the PC is switched-off and that the mains voltage is disconnected. After you have opened
the computer casing, you can install the eSATA card in a free PCI-X x1 slot, after removing the protective
metal plate. After installing the card, you may replace the computer housing cover and reconnect all
the cables you disconnected from the PC earlier.
When you've restarted the computer, Windows will automatically detect the new hardware.
After installing the drivers, the eSATA PCI-X adapter is ready for use. We advise you to restart your
computer before using the eSATA PCI-X adapter.
W A R R A N T Y
All items sold under the ICIDU name are covered by a two-year warranty. No warranty or support is
provided for the software and rechargeable batteries that are provided. Claims under warranty can
be made only via the dealer from whom the item was purchased. All brand names and rights
associated with the same, as mentioned in this manual, are and remain the property of the
rightful owner.
Specifications can be changed without notice.
All ICIDU products comply with current European safety and environmental standards and
legislation. For further details, visit our website www.icidu.com
ICIDU is a registered trademark. All other brand names and rights in connection with them are and remain the
property of the rightful owner.
© Copyright 2008 ICIDU
All rights expressly reserved