Fortress Technologies FSF1613W User manual

Brand: Fortress Technologies

Model: FSF1613W

Type: User manual

座地扇

Stand Fan

使用說明書

User Manual

型號 MODEL NO. FSF1613W

*使用本產品前請仔細閱讀本說明書，並請妥善保存以備日後查閱。

*Before operating the unit, please read this manual thoroughly and retain it for future

reference.

CONTENT PAGE

SAFETY INSTRUCTION 2

PARTS DESCRIPTION 3

INSTALLATION INSTRUCTION 4

OPERATION INSTRUCTION 6

MAINTENANCE INSTRUCTION 8

SPECIFICATION 8

WARRANTY 8

SAFETY INSTRUCTION

1. To avoid electric shock, risk of fire or injury, please read the user manual carefully before using

the appliance and keep it for future reference.

2. This appliance is for household use only. Please use suitable power source (220-240V~, 50Hz).

3. Never immerse the appliance in water or other liquids.

4. Do not use the appliance under direct sunshine.

5. Please turn off the appliance when not in use otherwise it may result in danger.

6. Please turn off the appliance and unplug the socket when unattended otherwise it may result in

danger.

7. Keep away the appliance from children.

8. The appliance is not intended for used by children or persons with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their

safety.

9. Children should be supervised to ensure that they do not play with the appliance.

10. With any indication of malfunction (including power cord), please stop using the appliance

immediately to avoid hazard. Take it to the authorized service center for repair. Do not attempt

to repair or change any parts by yourself.

11. Please turn off and unplug the appliance before cleaning or maintenance.

12. Clean the surface of the appliance with dry cloth. Do not use corrosive detergent or solvent to

clean. Do not swash the appliance with water.

13. Please turn off and unplug the appliance when not in use, make sure power is off before pulling

out the plug and do not pull the cord.

14. When the appliance is not in use for a prolonged period, please turn it off, unplug it and pack it

well. Then store it in dry cool place.

15. Forbid to put flammable and explosive objects around the appliance, and do not use the

appliance in an environment full of flammable gas and powder. Keep away from any fire and

heat sources.

16. Please put the power cord in the right place in order to avoid tripping the appliance over.

17. Please keep the air inlet and outlet unblocked to minimize the risk of fire and malfunction.

18. Ensure no water or raindrop into the appliance in order to avoid electric shock. Do not put

flammable objects or wet clothes on the air outlet in order to avoid short circuit or fire.

19. Please do not place air inlet or outlet near to curtain or wall when operation because it will

block air current and cause a risk of fire. The appliance should be installed at minimum distant

of 10 cm from the wall or other obstacle.

20. Please do not insert any objects into air inlet and outlet in order to avoid electric shock.

21. After a period of operation, there may be abnormal noise and uneven air volume because of

dust blocking airflow. It will disappear after cleaning the air inlet and outlet

22. Do not insert any objects in the grille to prevent any injury or damage.

23. Do not hang any objects on the grille to prevent destabilizing the fan and impairing its

operation.

-2-

-1-

PARTS DESCRIPTION

INSTALLATION INSTRUCTION

Caution: Please unplug the appliance before installation.

1. Base plate installation

• Loosen the L-type screw in anticlockwise direction to remove it from the standing

tube.

• Insert the standing tube into the central hole of the base plate.

• Screw the L-type screw in clockwise direction to fix the standing tube on the base

plate.

2. Fan body installation

• Insert the fan body into the standing tube and fix them by tighten the arc screw.

3. Guard and fan blade installation

A. Rear guard

• Unscrew the blade cap from the motor shaft in clockwise direction.

• Unscrew the guard lock from the motor shaft in anticlockwise direction.

• Set the rear guard and fit it well on the three position poles and make sure these poles

are properly put through the holes on the rear guard. Hold the rear guard and tighten

the guard lock in clockwise direction on the motor shaft.

1. Front guard

2. Guard ring

3. Blade cap

4. Fan blade

5. Guard Lock

6. Rear guard

7. Front motor cover

8. Rear motor cover

9. Control button

10. Power cord

11. Fan body

12. Arc screw

13. Standing tube

14. Base plate

15. L-type screw

16. Remote control

17. Handle

position

poles

guard lock

-3-

-4-

B. Fan blade

• Install the fan blade through the fan blade position hole. Ensure the fan blade grooves

fit the motor shaft fixing pin and push in until it reaches the fixing pin.

• Install the blade cap in anticlockwise direction onto the motor shaft until it is

tightened. Please hold the fan blade when installing the blade cap.

C. Front guard

• Normally, the guard ring is installed with the front guard. Loosen the screw on the

bottom of the guard and fit the front guard with guard ring into the rear guard. After

that, lock the guard clip and tighten the screw.

4. Battery replacement

OPERATION INSTRUCTION

1. Power on / speed adjustment

• Press ON/OFF button to turn on the fan.

• Press SPEED button for speed adjustment：

• The light near the control button will be on to indicate the selected speed:

Remark: The appliance has an automatic function memory which starts the operation

mode from the last time it was operated.)

2. Oscillation

• Press OSC. button, the fan is operated in oscillating mode to swing horizontally. The

light near the control button will be on. Oscillation will be stopped if press the

button again.

guard clip

Motor shaft

fixing pin

Motor

shaft

Fan blade

position hole

fan

blade

groove

-6-

-5-

3. Timer

• Press TIMER button to set the auto off time:

• The light near the control button will be on to indicate the selected auto off time:

4. Height adjustment

• Hold the fan body and loosen the arc screw, then adjust the standing tube to the

required height and tighten the arc screw.

•

5. Angle adjustment

• Turn off the fan, then lift or press the rear motor cover lightly to adjust the

blowing angle.

6. Mode

• Press MODE button to set the operation mode:

• In normal wind mode, the fan is running in same fan speed.

• In nature wind mode, the fan simulates the wind in the natural environment. It will be

operated from high speed and drop gradually and goes on circularly.

• In sleep wind mode, the fan speed level will be dropped one level every 30 minutes,

until it reaches low speed.

• The light near the control button will be on to indicate the selected mode:

MAINTENANCE INSTRUCTION

Caution:

• Please turn off and unplug the appliance before cleaning or maintenance.

• Clean the surface of the appliance with dry cloth.

• Do not use corrosive detergent or solvent to clean the appliance to avoid any

discolouration or damage.

• Do not swash with water.

• Do not use hard objects to clean the fan.

• Regular cleaning is suggested to avoid dirt blockage that may result in mechanical

failure.

SPECIFICATION

Model No.

FSF1613W

Product name

Stand fan

Voltage/Frequency

220-240V~, 50Hz

Power

60W

Dimension (W x H x D)

450 x 1141 x 450 mm

WARRANTY

1. The product has 2 years warranty from the date of purchase.

2. The warranty shall not apply:

A. to any Product subjected to accident, misuse, neglect, alteration, Acts of- God,

improper handling, improper transport, improper use, improper testing or

unauthorized repair;

B. to cosmetic problems or defects which result from normal wear and tear under

ordinary use, and do not affect the performance or use of the product. All

warranties are void if the product is opened, altered, and/or damaged;

C. to any packing, transportation, export / import tax or any related expenses.

3. CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR 2

YEARS WARRANTY SERVICES.

-8-

-7-

4. Please bring along the product and sales invoice or receipt to our services center for

warranty services during office hour:

Address : Unit A, 20/F, Yip Shing Industrial Centre, No.19,

Yip Shing Street, Kwai Chung.

Service Hotline : (852) 2428 1500

Service Hours:

Monday-Friday : 9:00am - 6:00pm

Saturday : 9:00am - 4:00pm

Sunday & Public Holiday : Closed

5. To prevent circuit overload and fire, no more than one adaptor or one extension unit

should be inserted into a socket outlet. (Do not connect other appliances to the socket

outlet supplying an electric heater.) No adaptor should be inserted into any extension

unit or vice versa.

6. Stop using an adaptor or extension unit or socket if its socket holes cannot firmly hold a

plug or if it is too hard to insert a plug into it.

7. Please make sure the plug is fully plugged-in before use. Do not use any adapter or

extension cord; Never use the same supply socket for this appliance and other

appliances at the same time, in order to avoid damage to this appliance.

8. THE APPLIANCE IS FOR HOUSEHOLD USE ONLY.

ENVIRONMENT

Do not throw away the appliance with the normal household waste at the end of its life, but

hand it in at an official collection point for recycling. By doing this, you help to preserve the

environment.

IMPORTANT NOTICES

IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE LIABLE TO YOU OR

ANY OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL SPECIAL,

INCIDENTAL, CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING

OUT OF THE USE OR INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT

LIMITATION, DAMAGES FOR INJURY, LOSS OF PROPERTY, BUSINESS PROFITS,

BUSINESS INTERRUPTION) OR FROMANY BREACH OF WARRANTY, EVEN IF

OUR COMPANY OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF

SUCH DAMAGES. IN NO CASE SHALL OUR COMPANY OR SUPPLIER'S

LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT.

Specifications, designs and dimensions subject to change without prior notice.

-9-

Fortress Technologies FSF1613W User manual

Fortress Technologies FSF1613W User manual

Fortress Technologies FSF1613W User manual

Related papers

Other documents