Fortress Technologies FHT2014 User manual

Brand: Fortress Technologies

Model: FHT2014

Type: User manual

Ceramic Heater

User Manual

MODEL: FHT2014

*Before operating the appliance, please read this manual thoroughly, and retain it for future reference.

CONTENT

PAGE

SAFETY INSTRUCTION

PRODUCT FEATURES

ASSEMBLY INSTRUCTION

PARTS DESCRIPTION

OPERATION INSTRUCTION

MAINTENANCE INSTRUCTION

SPECIFICATION

WARRANTY

SAFETY INSTRUCTION

1. To avoid electric shock, fire or injury, please read the user manual carefully before using the

appliance and keep it for future reference.

2. This appliance is for household use only. Please use suitable power source (220-240V~/50Hz).

3. Never immerse the appliance in water or other liquids.

4. Do not use the appliance under direct sunshine.

5. Please turn off the appliance when not in use otherwise it may result in danger.

6. Please turn off the appliance and unplug the socket when unattended otherwise it may result in

danger.

7. Keep the appliance away from children.

8. This appliance can be used by children aged from 8 years and above and persons with reduced

physical, sensory or mental capabilities or lack of experience and knowledge if they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall

not be made by children without supervision.

9. Children of less than 3 years should be kept away unless continuously supervised.

10. Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided

that it has been placed or installed in its intended normal operating position and they have been

given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and

clean the appliance or perform user maintenance.

11. With any indication of damage or malfunction, please stop using the appliance immediately to

avoid hazards. Take it to the authorized service center for repair. Do not attempt to repair or change

any parts by yourself.

12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid hazards.

13. Please turn off and unplug the appliance before cleaning or maintenance.

14. Clean the surface of the appliance with dry cloth. Do not use corrosive detergent or solvent to clean.

Do not swash the appliance with water.

15. Please turn off and unplug the appliance when not in use. Make sure the power is off before pulling

out the plug and do not pull the cord.

16. When the appliance is not in use for a prolonged period, please turn it off, unplug it, pack it well

and store it in dry cool place.

17. Forbid to put flammable and explosive objects around the appliance, and do not use the appliance

in an environment full of flammable gas and powder. Keep away from any fire and heat sources.

18. Please put the power cord in the right place in order to avoid tripping the appliance over.

19. Do not put any objects on the appliance and put the appliance immediately below a socket-outlet.

20. Do not touch the air outlet when operating.

21. Please keep the air inlet and the air outlet unblocked to minimize the risk of fire or malfunction.

22. Do not let the power cord touch or near the air outlet. It will damage the insulation layer of wires.

23. Please operate the appliance on a firm and level desk or floor. Do not use the appliance in the

immediate surroundings of a bath, a shower or a swimming pool.

24. Ensure no water or raindrop leaks into the appliance in order to avoid electric shock. Do not put

flammable objects or wet clothes on the air outlet in order to avoid short circuit or fire.

25. Please do not place the air inlet or the air outlet near to curtains or walls when operation because it

will block the air current and cause fire. The appliance should be installed at minimum distant of 10

cm from the wall or other obstacles.

26. Please do not insert any objects into the air inlet or the air outlet in order to avoid electric shock.

27. After a period of operation, abnormal noise and uneven air volume may appeared because of dust

blocking the airflow. It will disappear after cleaning the back net.

WARNING: In order to avoid overheating, do not cover the appliance with anything,

especially flammable materials, such as clothes or paper.

CAUTION: In order to avoid hazards due to inadvertent resetting of the thermal cutout,

this appliance must not be supplied through an external switching device, such as timers,

programmers, separate remote-control system or connected to a circuit that is regularly

switched on and off by the utility.

CAUTION: Some parts of this product can become very hot and cause burns. Particular

attention has to be given where children and vulnerable people are present.

PRODUCT FEATURES

 2 heating power options

 Touch sensor control panel

 With remote control

 1-12 hours timer

 Oscillation function

 LED display

 Overheating protection function

 Tip over protection function

 With removable air filter for easy cleaning

 Temperature setting: 15

C – 35

 Room temperature indicator

ASSEMBLY INSTRUCTION

 Open the box and take out all parts of the device and unscrew the cover fixer.

 Place the base on the bottom side of the device and using the cover fixer screw back in.

 Place the device on an even and stable floor before use.

Body

Cover fixer

Body

Cover fixer

Base

PARTS DESCRIPTION

① Control panel

② LED display

③ Air outlet

④ Base

⑤ Handle

⑥ Back grill

⑦ Filter

⑧ Power switch

⑨ Power plug

OPERATION INSTRUCTION

Connect the power plug to the correct socket outlet (220-240V~/50Hz).

Power switch

The power switch is at the bottom of rear cover under the air filter.

Press the power switch to “I” position, you will hear a “beep-beep” sound, the heater is ready to use.

Press the power switch to “0” position for turning off the heater.

Control Panel/LED display window

On/Off key ( )

Press the On/Off key, the heater will start operation at low heating power, the low heating power

indicator will turn on, and the LED display will show the room temperature. Press the On/Off key again,

the heater will turn off in few seconds.

High/Low heating power key ( )

Press the high/low heating power key to change high or low heating power during operation. The low

power indicator or the high power indicator will turn on according to the selection.

Low Heating Power Indicator

High Heating Power Indicator

Operation Indicator

Oscillation Indicator

Oscillation key ( )

Press the oscillation key to activate the oscillation function during operation. The oscillation indicator

will be on. Press the oscillation key again, the oscillation function will be stopped and the oscillation

indicator will be off.

Temperature/timer setting key ( )

Press the temperature/timer setting key to set the temperature or timer during operation.

A: Set the Timer

After pressing the temperature/timer setting key, the LED display will show “0H”. Press the “+” or the

“-” key to set the auto off time with a range of 1-12 hours. The timer will be added or reduced by 1 hour

for each press of the “+” or the “-” key. The LED display will flash for 5 seconds, and the setting will be

completed.

Note: After pressing the temperature/timer setting key, the LED display will flash for 5 seconds. You

can press the “+” or the “-” key to set the auto off time within 5 seconds. If the heater do not receive any

instruction, or keys other than the temperature/timer setting button, the “+” key or the “-” key are being

pressed within 5 seconds, the LED display will then resume to display the room temperature.

B: Set the Temperature

After setting the timer, press the temperature/timer setting key again, the LED display will show “25℃”,

now you can set the temperature. Press the “+” or the “-” key to set the temperature with a range of

15-35℃. The temperature will be added or reduced by 1℃ for each press of the “+” or the “-” key. The

LED display will flash for 5 seconds, and the setting will be completed.

Note: In temperature setting mode, the LED display will flash for 5 seconds. You can press the “+” or

the “-” key to set the temperature within 5 seconds. If the heater do not receive any instruction, or keys

other than the temperature/timer setting key, the “+” or the “-” key are being pressed within 5 seconds,

the LED display will then resume to display the room temperature.

REMOTE CONTROL OPERATION

PICTURE 1

PICTURE 2

Operation instruction of remote control

1. Pull out the battery door at the back side of remote control (Picture 1)

2. Insert a battery into the tray of the door. (Picture 2)

3. Insert the battery door back into the remote control.

Remote control panel

There are six function keys on the remote control and their functions are same as those keys on the

control panel of the heater. While operating the remote control, point the remote control to the display

window of the heater. The distance of received signal is within 6m.

fortress

MAINTENANCE INSTRUCTION

1. Please turn off and unplug the appliance before cleaning or maintenance.

2. Clean the surface of the appliance with dry cloth. Do not use corrosive detergent or solvent to

clean. Do not swash the appliance with water.

3. If there is too much dust on the filter, it will affect its function. Clean the air filter monthly if

needed. Please do not use chemicals for cleaning.

Cleaning the air filter

 Remove the air filter for cleaning as shown in the following diagram.

 Dip the air filter into water for few minutes, then wash and dry it; or use the soft cloth to wipe the

dust.

 If you use water to clean the filter, please make sure the air filter is dry before reinstalling it back

to the unit.

SPECIFICATION

Model No.

FHT2014

Product name

Ceramic Heater

Rated Voltage / Frequency

220-240V~ / 50Hz

Rated Power

Low:1300W / High:2500W

Temperature / Timer Setting

C – 35

C /1-12h

Dimensions (WxHxD)

263x825x263 mm

Net Weight

4.3kg

WARRANTY

1. The product has 2 years warranty from the date of purchase.

2. The warranty shall not apply:

A. to any product subjected to misuse, alteration, act of God, improper handling, improper transport,

improper testing or unauthorized repair;

B. to cosmetic problems or defects which result from normal wear and tear under ordinary use yet

not affecting the performance or use of the product;

C. if the product is disassembled or altered;

D. to any packing, transportation, export / import tax or any related expenses.

3. CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR 2 YEARS

WARRANTY SERVICES.

4. Please bring along the product and sales invoice or receipt to our services center for warranty services

during office hour:

Address : Unit A, 20/F, Yip Shing Industrial Centre, No.19, Yip Shing

Street, Kwai Chung.

Service Hotline : (852) 2428 1500

Service Hours:

Monday-Friday : 9:00am - 6:00pm

Saturday : 9:00am - 4:00pm

Sunday & Public Holiday : Closed

NOTES

 To prevent circuit overload and fire, no more than one safety compliant adaptor or extension unit should

be inserted into a socket outlet. (Do not connect other appliances to the socket outlet supplying an

electric heater.) No adaptor should be inserted into any extension unit or vice versa.

 Stop using an adaptor or an extension unit or a socket if its socket holes cannot firmly hold a plug if it is

too hard to insert a plug into it.

 This appliance must be plugged into a specific 220-240V socket. Please make sure the plug is fully

plugged-in before use. Do not use any adapter or extension cord; Never use the same supply socket for

this appliance and other appliances at the same time, in order to avoid damage to this appliance.

 THE APPLIANCE IS FOR HOUSEHOLD USE ONLY.

ENVIRONMENT

Do not throw away the appliance with the normal household waste at the end of its life, but hand

it in at an official collection point for recycling. By doing this, you help preserving the

environment.

IMPORTANT NOTICES

IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE LIABLE TO YOU OR ANY OTHER

PARTY FOR ANY DIRECT, INDIRECT, GENERAL SPECIAL, INCIDENTAL, CONSEQUENTIAL,

EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE

PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR INJURY, LOSS OF PROPERTY,

BUSINESS PROFITS, BUSINESS INTERRUPTION) OR FROM ANY BREACH OF WARRANTY, EVEN

IF OUR COMPANY OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

IN NO CASE SHALL OUR COMPANY OR SUPPLIER’S LIABILITY EXCEED THE AMOUNT YOU

PAID FOR THE PRODUCT.

Specifications, designs and dimensions are subject to change without prior notice.

Fortress Technologies FHT2014 User manual

Fortress Technologies FHT2014 User manual

Fortress Technologies FHT2014 User manual

Related papers

Other documents