KARUIZAWA KSF1615 User manual

Brand: KARUIZAWA

Model: KSF1615

Category: Household fans

Type: User manual

Stand Fan

User Manual

Model No.: KSF1615

*Before operating the appliance, please read this manual

and all the safety instructions thoroughly and retain it

for future reference.

CONTENT PAGE

SAFETY INSTRUCTION 3

PARTS DESCRIPTION 4

INSTALLATION INSTRUCTION 5

OPERATION INSTRUCTION 7

MAINTENANCE INSTRUCTION 7

SPECIFICATION 8

WARRANTY 8

SAFETY INSTRUCTION

1. To avoid electric shock, fire or injury, please read the user manual carefully before using the

appliance and keep it for future reference.

2. This appliance is for household use only. Please use suitable power source (220-240V~/50Hz).

3. Never immerse the appliance in water or other liquids.

4. Do not use the appliance under direct sunshine.

5. Please turn off the appliance when not in use otherwise it may result in danger.

6. Please turn off the appliance and unplug the socket when unattended otherwise it may result in

danger.

7. Keep the appliance away from children.

8. The appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsible for their safety.

9. Children should be supervised to ensure that they do not play with the appliance.

10. With any indication of damage or malfunction, please stop using the appliance immediately to

avoid hazards. Take it to the authorized service center for repair. Do not attempt to repair or

change any parts by yourself.

11. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid hazards.

12. Please turn off and unplug the appliance before cleaning or maintenance.

13. Clean the surface of the appliance with a dry cloth. Do not use corrosive detergent or solvent to

clean. Do not swash the appliance with water.

14. Please turn off and unplug the appliance when not in use. Make sure the power is off before

pulling out the plug and do not pull the cord.

15. When the appliance is not in use for a prolonged period, please turn it off, unplug it, pack it well,

and store it in dry cool place.

16. Forbid to put flammable and explosive objects around the appliance, and do not use the appliance

in an environment full of flammable gas and powder. Keep away from any fire and heat sources.

17. Please put the power cord in the right place in order to avoid tripping the appliance over.

18. Please keep the air inlet and the air outlet unblocked to minimize the risk of fire or malfunction.

19. Ensure no water or raindrop leaks into the appliance in order to avoid electric shock. Do not put

flammable objects or wet clothes on the air outlet in order to avoid short circuit or fire.

20. Please do not place the air inlet or the air outlet near to curtains or walls when operation because it

will block the air current and cause fire. The appliance should be installed at minimum distant of

10 cm from the wall or other obstacles.

21. Please do not insert any objects into the air inlet or the air outlet in order to avoid electric shock.

22. After a period of operation, abnormal noise and uneven air volume may appeared because of dust

blocking airflow. It will disappear after cleaning the air inlet and outlet.

23. Do not insert any objects in the fan to prevent any injury or damage.

24. Do not hang any objects on the louver to prevent destabilizing the fan and impairing its operation.

-3- -2-

PARTS DESCRIPTION

INSTALLATION INSTRUCTION

Caution: Please unplug the appliance before installation.

1. Base and head unit installation

• Loosen the height adjustment ring in anticlockwise direction and put the base cover on the

outer pole (Fig. 1).

• Lift the inner pole to certain height and screw the height adjustment ring in clockwise direction

(Fig. 2).

• Fit the outer pole into the centre section of the base plate (Fig. 3).

• Fasten the base knob at the bottom of the base plate to fix the position of the outer pole with

the base plate (Fig 4).

• Loosen the screw on the bottom of the head unit but do not unscrew it totally

(Fig. 5).

• Place the head unit on the inner pole and tighten the screw (Fig. 6).

Fig.1 Fig.2 Fig.3

Fig.4 Fig.5 Fig.6

1.Front guard

2.Fan blade

3.Guard ring

4.Height adjustment pole (inner)

5.Height adjustment ring

6.Height adjustment pole (outer)

7.Base cover

8.Base plate

9.Power cord

10.Motor

11.Oscillation Knob

12.Head unit

13.Timer

Height

adjustment

ring

Base

cover

Twist in

clockwise

direction

Bottom part of

the outer pole

Centre

section

on the base

plate

Screw

---

Screw

Insert

Height

adjustment

pole (inner)

Base

knob

-5- -4-

Height

pole

adjustment

(outer)

Fig.7 Fig.8 Fig.9

B. Fan blade

• Install the fan blade through the fan blade position hole. Ensure the fan blade grooves fit the

motor shaft fixing pin and push in until it reaches the fixing pin (Fig 10).

• Install the fan blade knob in anticlockwise direction onto the motor shaft until it is tightened.

Please hold the fan blade when installing the fan blade knob (Fig. 11).

OPERATION INSTRUCTION

1. Power on / speed adjustment

• Press fan speed button for speed adjustment：

0:Off / Stop 1:Low Speed 2:Medium Speed 3:High Speed

Note: If the timer knob is turned to “OFF”, the fan is turned off. Please ensure the timer knob is

turned to “ON” or selected time before starting the operation.

2. Timer

• Turn the timer knob to “ON”, the fan will be operated continuously, no auto off timer

setting.

• Turn the timer knob to the number, which indicates the fan will stop after the set time

limit. For example, turning to 20 means the fan will be off after 20 minutes; Turn the

timer knob to “OFF”, the fan will not operate.

3. Oscillation

• Press down the oscillation knob, the fan will operate in

oscillating mode to swing horizontally. Lift the knob to

stop the oscillation.

4. Height adjustment

• Turn off the fan, then hold the height adjustment pole and

loosen the height adjustment ring, then adjust the pole to

the required height and tighten the height adjustment ring

by twisting it in clockwise direction.

5. Angle adjustment

• Turn off the fan, then lift or press the motor lightly to adjust the

blowing angle.

MAINTENANCE INSTRUCTION

Attention:

• Please turn off and unplug the appliance before cleaning or maintenance.

• Clean the surface of the appliance with a dry cloth.

• Do not use corrosive detergent or solvent to clean the appliance to avoid any discolouration or

damage.

• Do not swash with water.

• Do not use hard objects to clean the fan.

• Regular cleaning is suggested to avoid dirt blockage that may result in mechanical failure.

position

poles

Guard knob

Motor shaft

fixing pin

Motor

shaft

Fan blade

position hole

Fan

blade

groove

Timer

Knob

Twist in

clockwise

direction

-5-

Fan speed button

Oscillation knob

-6- -7-

2. Guard and fan blades installation

A. Rear guard

• Unscrew the fan blade knob from the motor shaft in clockwise direction (Fig. 7).

• Unscrew the guard knob from the motor shaft in anticlockwise direction (Fig. 8).

• Set the rear guard and fit it well on the three position poles and make sure these poles are

properly put through the holes on the rear guard. Hold the rear guard and tighten the guard

knob in clockwise direction on the motor shaft (Fig. 9) .

C. Front guard

• Normally, the guard ring is installed with the front guard. Loosen the screw on the bottom of

the guard and fit the front guard with guard ring into the rear guard. After that, lock the guard

clip and tighten the screw (Fig.12).

Fig.10 Fig.11

Fig.12

Guard clip

SPECIFICATION

Model No.

KSF1615

Product name

Stand fan

Rated Voltage/Frequency

220V-240V~/50Hz

Rated Power

55W

Dimension (W x H x D)

445 x1380x420mm

WARRANTY

1. The product has 1 year warranty from the date of purchase.

2. The warranty shall not apply:

A. to any product subjected to misuse, alteration, act of God, improper handling, improper

transport, improper testing or unauthorized repair;

B. to cosmetic problems or defects which result from normal wear and tear under ordinary use

yet not affecting the performance or use of the product;

C. if the product is disassembled or altered;

D. to any packing, transportation, export / import tax or any related expenses.

3. CUSTOMER MUST PRESENT THE SALES INVOICE OR RECEIPT FOR 1 YEAR

WARRANTY SERVICES.

4. Please bring along the product and sales invoice or receipt to our services center for warranty

services during office hour:

Address : Unit A, 20/F, Yip Shing Industrial Centre, No.19, Yip Shing

Street, Kwai Chung.

Service Hotline : (852) 2428 1500

Service Hours:

Monday-Friday : 9:00am - 6:00pm

Saturday : 9:00am - 4:00pm

Sunday & Public Holiday : Closed

NOTES

 To prevent circuit overload and fire, no more than one safety compliant adaptor or extension

unit should be inserted into a socket outlet. (Do not connect other appliances to the socket outlet

supplying an electric heater.) No adaptor should be inserted into any extension unit or vice

versa.

 Stop using an adaptor or an extension unit or a socket if its socket holes cannot firmly hold a

plug if it is too hard to insert a plug into it.

 This appliance must be plugged into a specific 220-240V socket. Please make sure the plug is

fully plugged-in before use. Do not use any adapter or extension cord; Never use the same

supply socket for this appliance and other appliances at the same time, in order to avoid damage

to this appliance.

 THE APPLIANCE IS FOR HOUSEHOLD USE ONLY.

ENVIRONMENT

Do not throw away the appliance with the normal household waste at the end of its life, but hand it in

at an official collection point for recycling. By doing this, you help preserving the environment.

IMPORTANT NOTICES

IN NO EVENT SHALL OUR COMPANY OR THE SUPPLIER BE LIABLE TO YOU OR ANY

OTHER PARTY FOR ANY DIRECT, INDIRECT, GENERAL SPECIAL, INCIDENTAL,

CONSEQUENTIAL, EXEMPLARY OR OTHER DAMAGES ARISING OUT OF THE USE OR

INABILITY TO USE THE PRODUCT (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR

INJURY, LOSS OF PROPERTY, BUSINESS PROFITS, BUSINESS INTERRUPTION) OR FROM

ANY BREACH OF WARRANTY, EVEN IF OUR COMPANY OR SUPPLIER HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN NO CASE SHALL OUR COMPANY

OR SUPPLIER’S LIABILITY EXCEED THE AMOUNT YOU PAID FOR THE PRODUCT.

Specifications, designs and dimensions are subject to change without prior notice.

-9-

-8-

KARUIZAWA KSF1615 User manual

Brand: KARUIZAWA

Model: KSF1615

Category: Household fans

Type: User manual

Download PDF

report

KARUIZAWA KSF1615 User manual

KARUIZAWA KSF1615 User manual

Other documents