All other trademarks are property
of their respective owners.
Product availability, specifications,
and compliances are subject to
change without notice.
Canada Sales
5925 McLaughlin Road
Mississauga, Ontario L5R 1B8
P: 905-501-3000
F: 905-501-3172
Cooper Lighting Solutions
1121 Highway 74 South
Peachtree City, GA 30269
P: 770-486-4800
www.eaton.com/lighting
© 2019 Cooper Lighting Solutions
All Rights Reserved
Printed in USA
Publication No. WP502002EN
November 21, 2019
What is 0-10V dimming?
• A dimmer provides 0 to 10V (0-10V) control voltage to the control circuitry of a lighting xture’s power supply. The input from the dimmer
adjusts the light level of the xture. The lower the voltage input, the more the xture will dim.
• A 0-10V dimmable xture can be paired with a 0-10V dimmer using purple and grey low voltage wires. The purple and grey wires are separate
from AC or DC power wiring.
• Only a 0-10V dimmer can be used to dim a 0-10V dimmable lighting xture.
NOTE: An in-line dimmer will prevent the xture from operating properly.
Do not wire an in-line dimmer to a 0-10V dimmable xture.
Dimmer Make Dimmer Series Dimmer Model # 0-10V rated current (mA)
Eaton Slide Dimmer SF10P 200
Eaton Decorator Dimmer DF10P 200
Levitron Illumatech IP710-DL 28
Lutron NTFTV NOVA T 30
Lutron DIVA DVTV 30
Eaton iLumin SC277-06 100
Eaton Greengate CK4A 100
Metalux LED
0-10V Dimming Guide
Ballast/LED Driver
Line (hot)
Neutral
0-10V
dimmer
In-line
dimmer
Ballast/LED Driver
Line (hot)
Neutral
+
-
Purple
Grey
0-10V
VS
In-line (phase cut) dimming
Dimming using separate control circuit inside of ballast/LED
driver
Dimming achieved via AC hot line
Two additional wires needed (purple and grey wires) No additional wiring required
Class 2 low voltage Class 1 AC power
Wiring Diagram Example
Recommended DImmer Switches*
Note, these diagrams are only examples. You should refer to the instructions included with your dimmer switch.
* Most 0-10V dimmers include an integrated switch, button or rocker to completely turn off power to the xture.
/
