RAB Lighting HALV10L930-FG1-W/LC Operating instructions

INSTRUCTIONS

HALV Indoor Architectural-Grade LED Wall Sconce

RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install

and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mark[email protected]

IMPORTANT

READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.







WARNINGS:

• Make certain power is OFF before installing or maintaining ﬁxture. No user serviceable parts inside.

• To prevent wiring damage or abrasion, do not expose wiring to edges of sharp objects.

CAUTION:

• This ﬁxture supports the following protocols – Triac and ELV at 120V ONLY. For 0-10V dimming, connect purple wire to the

V+ DIM lead and the grey wire to the V-DIM lead. This ﬁxture is damp listed and suitable for indoor applications on walls.

Driver is 120V – 277V and 50Hz or 60 Hz

.

HALV

Mounting the ﬁxture on a standard 4 x 4 J-BOX.

This ﬁxture is damp listed and suitable for indoor applications

on walls

 driver/LED mounting

driver/LED assembly

DO NOT

TOUCH THE LEDsFigure 1

 Driver/LED

 Wall Plate



‘S’ hook

 Driver/LED Assembly‘S’ hook

Figure 1a

 



 Driver/LED Assembly



 

 (standard models)

‘S’ Hook Notch

Wall Plate

Driver/LED

Assembly

DO NOT TOUCH LEDs

Driver/LED

Screw Keyhole

Wire Hole

Driver/LED mounting screws

‘S’ Hook



‘S’ Hook



INSTRUCTIONS

HALV Indoor Architectural-Grade LED Wall Sconce

RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install

and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mark[email protected]



Wall box is installed before sheetrock.

 Driver/LED/Wall plate

Figure 1



Hanger



 Nailer BarsFigure 2

 

Nailer Bars

 

Nailer Bars

 

Wall box is installed after sheetrock.

 Driver/LED/Wall plate

Figure 1



Hanger



 Nailer Bars

 Stop BracketsSheetrock

ClampsFigure 3 

 



 

 Wall Box

Wall Box





`



Hanger

Sheetrock Clamp

Stop Bracket

after relocation.

Move both

Stop Bracket screw

after relocation

Stop Bracket

before relocation

Stop Bracket screw

before relocation

Nailer Bar

Tighten to secure

in sheetrock

Hanger

Driver/LED/Wall

plate assembly

DO NOT TOUCH LEDs

Insert

screwdriver

though hole to

loosen screw

4 places

Hanger

Nailer bar

Stop Bracket

Discard for new

work install

Tighten this locating screw

to hold box in place



(models w/wall box)



(models w/wall box)





INSTRUCTIONS







 









 









 DO NOT OPEN THE FIXTURE TO CLEAN THE LEDs. DO NOT

TOUCH THE LEDs

 



 

 Lens FrameDriver/LED assembly

mounting screwFigure 5

 

Figure 5

 

 





Driver / LED Assembly

DO NOT TOUCH LEDs

Mounting Screw

Lens Frame



Note: These instructions do not cover all details or variations in equipment nor do they provide for every possible situation during installation, operation or maintenance.

 Driver/LED/Wall plateHanger Bracket

Figure 4

 

 Hanger Bracket



 

 Driver/LED/Wall plateHanger

Figure 4 

 



 

 Hanging Bracket



 



(with E2, E2/MVS, E2/BL, or LC/E2 Options)



(with LC option)



Hanger

INSTRUCTIONS

HALV Indoor Architectural-Grade LED Wall Sconce

RAB Lighting is committed to creating high-quality, aordable, well-designed and energy-ecient LED lighting and controls that make it easy for electricians to install

and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: mark[email protected]

Easy Answers

rablighting.com

Visit our website for product info

Tech Help Line

Call our experts - 888 722-1000

e-mail

Answered promptly - [email protected]

Free Lighting Layouts

Answered online or by request

Northvale, New Jersey 07647 USA

