2. COMMAND ACCESS TECHNOLOGIES
  3. V23 Von Duprin

COMMAND ACCESS TECHNOLOGIES V23 Von Duprin User manual

  • I have reviewed the Installation Instructions for the V23 230L Series Electric Exit Trim. This document details how to install the modified Von Duprin exit trim, covering door preparation, wiring, and mounting using the ETH hinge and Bridge Rectifier. I'm ready to answer any questions you may have regarding this installation process, differences between fail-safe and fail-secure operation, or any other details in the document.
  • What does 'EU' mean in the context of this device?
    What does 'EL' mean in the context of this device?
    What is the purpose of the REE switch?
Installation Instructions
V23 - 230L Series
Von Duprin Electric Exit Trim modied by Command Access Technologies
STEP 1: The door must be machined with a 3/8” wire raceway, Exit
Trim & prepped for a energy transfer hinge. Make sure
the pocket is free of debris.
STEP 4: Connect the wires exiting the pocket to the Bridge
Rectier (included).
STEP 2: Run the wires from the ETH hinge through the 3/8”
raceway starting at the ETH hinge & exiting into the
pocket.
STEP 5: Connect the Bridge Rectier to the plug exiting the
Electric Exit Trim.
STEP 3: Screw the ETH hinge to the door. At this time DO NOT
connect the hinge wires on the jamb side to the wires
coming from the power supply.
EU: (Fail Secure) When power is applied, the outside trim will unlock. When
power is removed, the outside trim is locked.
EL: (Fail Safe) When power is applied, the outside trim will lock. When
power is removed, the outside trim is unlocked.
REE: (Request to Enter Switch) Monitors the outside handle.
STEP 8: Connect the wires from the power supply at the ETH
hinge on the jamb side. Connect the hinge to the jamb.
STEP 6: Carefully slip the connected Electric Exit Trim into the
pocket paying close attention not to pinch any wires.
STEP 7: Mount the Electric Exit Trim per manufacturer’s
instructions.
LEGEND OF TERMS
SOLENOIDS:
SEE BACK FOR TEMPLATE
VOLTS
24VAC/DC
12VAC/DC
CURRENT
150mA
250mA
COIL RESISTANCE
159 Ohms +/- 10%
49 Ohms +/- 10%
SWITCHES: .5A 24VAC/DC
REE: Green - Common (C)
Blue - Normally Open (NO)
Gray - Normally Closed (NC)
ELECTRICAL SPECIFICATIONS
Command Access Technologies is not a licencee, aliated, associated or connected with Von Duprin or any of their subsidiaries or aliates.
Command Access Technologies | 22901 La Palma Ave. Yorba Linda, CA 92831 | Phone: (888) 622-2377 | www.CommandAccess.com
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Exit Trim
Prep
3/8 Wire Raceway
ETH Hinge Pocket
Wire Transfer Hinge
Plug
3/8 Wire Raceway
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
(ETH)
(ETH)
(ETH)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Exit Trim
Prep
3/8 Wire Raceway
ETH Hinge Pocket
Wire Transfer Hinge
Plug
3/8 Wire Raceway
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
(ETH)
(ETH)
(ETH)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Exit Trim
Prep
3/8 Wire Raceway
ETH Hinge Pocket
Wire Transfer Hinge
Plug
3/8 Wire Raceway
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
(ETH)
(ETH)
(ETH)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Exit Trim
Prep
3/8 Wire Raceway
ETH Hinge Pocket
Wire Transfer Hinge
Plug
3/8 Wire Raceway
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
(ETH)
(ETH)
(ETH)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Wire Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Exit Trim
Prep
3/8 Wire Raceway
ETH Hinge Pocket
Wire Transfer Hinge
Plug
3/8 Wire Raceway
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
Bridge
Rectifier
Exit Trim
Prep
(ETH)
(ETH)
(ETH)
20331_B
Template for Von Duprin 230L Series Exit Trims
1-11/16”
1-11/16”
5/8” diameter
through hole
(4) 3/8” diameter
through hole
1-1/4”
3/4” deep cutout
3/8”
3/8”
1-1/8”
1/4”
1-1/2”
2”
5/8” 5/8”
1-1/8”
5/8” 5/8”
Command Access Technologies is not a licencee, aliated, associated or connected with Von Duprin or any of their subsidiaries or aliates.
Command Access Technologies | 22901 La Palma Ave. Yorba Linda, CA 92831 | Phone: (888) 622-2377 | www.CommandAccess.com
Command Access Technologies is not a licencee, aliated, associated or connected with Von Duprin or any of their subsidiaries or aliates.
Command Access Technologies | 22901 La Palma Ave. Yorba Linda, CA 92831 | Phone: (888) 622-2377 | www.CommandAccess.com
Handing for Von Duprin 230L Series Exit Trims
• To Change the handing, removing the
retaining ring.
• Use a screwdriver to push ip the
slider leg to remove any load
from the lever and remove lever
cam.
• Remove the shear pin
• Re-install lever cam with the
correct letter visiable. R=RHR &
L=LHR
• Re-install the retaining ring.
• Rotate the lever to the desired
position. Re-install shear pin
Back
Plate
Slider leg
Lever cam
Retaining Ring
Remove shear pin
Re-install shear pin
R=RHR
L= LHR
Command Access Technologies is not a licencee, aliated, associated or connected with Von Duprin or any of their subsidiaries or aliates.
Command Access Technologies | 22901 La Palma Ave. Yorba Linda, CA 92831 | Phone: (888) 622-2377 | www.CommandAccess.com
/