Command Access ML90-M Series is a motorized lever control mortise lock designed for various access control applications. It features a fail-safe or fail-secure operation, allowing you to choose the locking mechanism that best suits your security needs. The lock is compatible with a range of power supplies and includes optional built-in switches for added functionality. Installation is simplified with a 3/8" wire raceway for easy wire management. The ML90-M Series is suitable for use with energy transfer hinges and offers customizable handing options for flexible placement.
Command Access ML90-M Series is a motorized lever control mortise lock designed for various access control applications. It features a fail-safe or fail-secure operation, allowing you to choose the locking mechanism that best suits your security needs. The lock is compatible with a range of power supplies and includes optional built-in switches for added functionality. Installation is simplified with a 3/8" wire raceway for easy wire management. The ML90-M Series is suitable for use with energy transfer hinges and offers customizable handing options for flexible placement.
INSERT INSTRUCTIONS
Visit our website for more details
www.commandaccess.com
Canada Customer Support
1-855-823-3002
U.S. Customer Support
1-888-622-2377
ML90-M Series
The Command Access Modied Schlage L9000 series - Motorized Lever Control Mortise Lock
A.
A. 1- ML9X-m Series
B. 1- 50009 BR12
C. 1 - 50507 Institutional spindle*
Includes
• Input Voltage: 11-30VDC
• AVERAGE CURRENT PEAK: 100 mA
• Average holding current: 10 ma
• Wire gauge: Minimum 28 gauge
Recommended Power Supplies:
All Command Access products have been thoroughly cycle tested with Command Access power supplies at our factory. If you
plan on using a non-Command power supply it must be a filtered & regulated linear power supply.
#20430_D
SPECIFICATIONS
• green= Common (C)
• Blue = normally open (NO)
• grey = normally closed (NC)
• green/BLACK= Common (C)
• Blue/BLACK = normally open (NO)
• grey/BLACK = normally closed (NC)
• WHITE= Common (C)
• Blue = normally open (NO)
• BLACK = normally closed (NC)
Optional built-in SWITCHES
SPDT RATED .5A @24V
REX LBM DPS
B. C.
* Only included with the ML95-M
Installation Instructions
3. 4.
1. 2.
5. 6.
The door must be machined with a 3/8” wire raceway, mortise
lock pocket & prepped for a energy transfer hinge. Make sure
the mortise pocket is free of debris.
Connect the wires exiting the mortise pocket to the Bridge
Rectier (included).
Run the wires from the ETH hinge through the 3/8” raceway
starting at the ETH hinge & exiting into the mortise pocket.
Connect the Bridge Rectier to the plug exiting the mortise
chassis.
Screw the ETH hinge to the door. At this time DO NOT
connect the hinge wires on the jamb side to the wires coming
from the power supply.
Connect the wires from the power supply at the ETH hinge
on the jamb side. Connect the hinge to the jamb.
Carefully slip the connected mortise lock chassis into the
mortise pocket paying close attention not to pinch any wires.
Mount the chassis per manufacturer’s instructions.
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
US customer support 1-888-622-2377 | www.commandaccess.com | CANADA customer support 1-855-823-3002
7. 8.
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
1
2
3
4
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
US customer support 1-888-622-2377 | www.commandaccess.com | CANADA customer support 1-855-823-3002
Installation Instructions
Connect the wires exiting the mortise pocket to the Bridge
Rectier (included).
Run the wires from the ETH hinge through the 3/8” raceway
starting at the ETH hinge & exiting into the mortise pocket.
Carefully slip the connected mortise lock chassis into the
mortise pocket paying close attention not to pinch any wires.
US customer support 1-888-622-2377 | www.commandaccess.com | CANADA customer support 1-855-823-3002
1
Remove (2) Phillips head screws securing the
faceplate/armor front.
1.
• EU-Fail Secure: (Electrically Unlocked) Outside lever locked without power.
• EL-Fail Safe: (Electrically Locked) Outside lever unlocked without power.
CHANGE Function Fail Safe or Fail Secure for ALL ML9X-M Locks
Locate the EU/EL Switch in the deadbolt cavity
& position it in the desired function.
2.
Power is NOT required to change function.
• Lock will change to desired function next time power is
presented.
• Present power through the access control system.
• Press & hold momentary power button until you hear
motor spin(roughly 5 seconds).
3.
Test lock for desired function.
4.
Re-install (2) Phillips head screws to secure the
faceplate/armor front with
5.
2
EL
EU
MOMENTARY
POWER BUTTON
EU/EL Switch
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EU (Fail Secure)
EU (Fail Secure)
12VAC/DC
24VAC/DC
or
Power
Supply
Bridge Rectifier Energy Transfer Hinge
Switch
EL (Fail Safe)
EL (Fail Safe)
Mortise
Lock
Pocket
3/8 Wire Raceway
ETH Hinge Pocket
Bridge
Rectifier
Wire Transfer Hinge
Bridge
Rectifier
Plug
3/8 Wire Raceway
Mortise
Lock
Pocket
Mortise
Lock
Pocket
Mortise
Lock
Pocket
US customer support 1-888-622-2377 | www.commandaccess.com | CANADA customer support 1-855-823-3002
Installation Instructions
US customer support 1-888-622-2377 | www.commandaccess.com | CANADA customer support 1-855-823-3002
LH/LHR RH/RHR
Rotate 180 Deg.
Handing Screw
Template for ML9X-M Series Mortise Locks
Locate the handing screw. This screw is used to hand the handles. The
Locking side is opposite the screw.
To hand the latchbolt, remove the faceplate. Pull the latchbolt out of the
chassis and rotate, then release. The latchbolt is spring loaded and will
return on it’s own.
1-3/16”
1-23/32”
2-1/4”
2-9/64”
2-3/4”
3-9/32”
2-7/32”
1-1/4” diameter
cylinder hole for exterior
side only on ML19092-M *
1” diameter
through hole
3/8” diameter
through hole
3/8” diameter
through hole
4-7/16”
6-1/8”
*Note: Cylinder hole will be on both
interior and exterior for ML19095-M
(Institutional).
HOW TO CHANGE HANDING
1. 2.
-
1
-
2
-
3
-
4
Command Access ML90-M Series is a motorized lever control mortise lock designed for various access control applications. It features a fail-safe or fail-secure operation, allowing you to choose the locking mechanism that best suits your security needs. The lock is compatible with a range of power supplies and includes optional built-in switches for added functionality. Installation is simplified with a 3/8" wire raceway for easy wire management. The ML90-M Series is suitable for use with energy transfer hinges and offers customizable handing options for flexible placement.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
INOX MC7000 User manual
-
ABH 6600-LR6600 Operating instructions
-
COMMAND ACCESS TECHNOLOGIES V23 Von Duprin User manual
-
BEST ACCESS SYSTEMS 93KW User manual
-
Sargent IN220 Installation Instructions Manual
-
Falcon MA-Lock User manual
-
Sargent Assa Abloy IN120 Installation Instructions Manual
-
Sargent PASSPORT 1000 Exit Device Installation Instructions Manual
-
Sargent Sargent IN220 Installation Instructions Manual
-
Sargent Profile Series Installation Instructions Manual
