Stoody Company

PDS-NI-E-001

5557 Nashville Road • Bowling Green, KY 42101 Revision 3

1-800-227-9333 08/02/02

Notice: The information contained or otherwise referenced herein is presented only as “typical”, without guarantee or warranty. Stoody expressly disclaims any liability from any reliance

thereon. Typical data are those obtained when welded and tested in accordance with Stoody’s internal procedures. Other tests and procedures may produce different results. No data is to be

Stoody

frictional properties. Deposits are dense and smooth.

TYPICAL DEPOSIT CHARACTERISTICS

Abrasion Resistance Good

Impact Resistance Excellent

Surface Cross Check No

Machinability Yes

TYPICAL DEPOSIT CHEMISTRY (wt%)

Carbon 0.04

Chromium 15.3

Iron 6.1

Manganese 0.1

Molybdenum 16.6

Diameter, In. (mm)

Current, Amp. DCEP 55 – 100 80 - 120

Position Flat Flat

Diameter, In. (mm)

5/32(4.0) 3/16(4.8)