2. Industrial & lab equipment
  3. Welding System
  4. ESAB
  5. C Gas Metal / Open Arc / Submerged Arc Welding Wire

ESAB C Gas Metal / Open Arc / Submerged Arc Welding Wire, Stoody® C Gas Metal / Open Arc / Submerged Arc Welding Wire User manual

  • Hello! I am an AI chatbot trained to assist you with the ESAB C Gas Metal / Open Arc / Submerged Arc Welding Wire User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Stoody Company
PDS-NI-W-001
5557 Nashville Road • Bowling Green, KY 42101 Revision 3
1-800-227-9333 09/13/99
STOODY Stoody
C
A THERMADYNE Company
Gas Metal /
Open Arc / Submerged Arc Welding Wire
DESCRIPTION
Stoody
C semi-automatic wire for open arc, gas
shielded and submerged arc operation is a tubular
nickel based wire developed for harsh environments
of temperature and corrosion. The work hardening
properties of this alloy make it especially resistance
to metal-to-metal wear under conditions of high
temperature and impact. It retains hardness up to
1200
0
F and has a low coefficiency of friction.
Deposits are dense and smooth.
TYPICAL DEPOSIT CHARACTERISTICS
Abrasion Resistance Good
Impact Resistance Excellent
Corrosion Resistance Excellent
Hardness (2 layers - work hardened) HRC 30 - 40
Hot Hardness Up to 1200
0
F
Magnetic No
Deposit Layers Unlimited
Surface Cross Check No
Machinability Yes
Specifications
AWS / SFA A5.21 ERNiCrMo-5A
(when issued)
TYPICAL DEPOSIT CHEMISTRY (wt%)
Carbon 0.02
Chromium 15.8
Iron 5.0
Manganese 0.1
Molybdenum 16.0
Silicon 0.2
Tungsten 4.0
Nickel Balance
TYPICAL APPLICATIONS
• Hot forging dies • Tong bits
• Hot trimming dies • Guide rolls
TYPICAL APPLICATIONS (cont.)
• Sizing punches • Flow control valves
• Rotary forge hammers
OPERATIONAL CHARACTERISTICS /
WELDING PARAMETERS
C-O
Diameter, In. (mm)
3/32 (2.4)
Current, Amp. DCEP 280 – 350
Voltage 25 – 29
Shielding Gas None / 75% Ar - 25% CO
2
Wire Feed Speed (IPM) 140 – 160
Wire Extension ½” – 1 ½”
Position Flat
C-M
Diameter, In. (mm)
1/16 (1.6)
Current, Amp. DCEP 280 – 310
Voltage 26 – 28
Shielding Gas 100% Argon
Wire Extension ½” – ¾”
Position Flat
C-S
802 Flux
Diameter, In. (mm)
3/32 (2.4) 1/8 (3.2)
Current, Amp. DCEP 250 – 300 350 – 400
Voltage 28 – 30 28 – 30
Wire Travel Speed (IPM) 24 – 30 24 – 30
Wire Extension 1” – 1 ¼” 1 ¼” – 1 ½”
Position Flat Flat
STANDARD SIZES & PACKAGING
Diameter Packaging Part #
3/32” (2.4mm) 50# Coil, LLW 11428300 C-O
1/16” (1.6mm) 25# WB, LLW 827322282062 C-M
1/8” (3.2mm) 500# Pop 11877100 C-S
3/32” (2.4mm) 50# Coil, LLW 827322284094 C-S
/