2. Digitus
  3. DN-70543
DN-70543

Digitus DN-70543, DN-70542 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Digitus DN-70543 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What USB port should I use to connect the Digitus DN-70543 Wireless USB Adapter?
    How do I start the installation procedure for the Digitus DN-70543 Wireless USB Adapter?
    What should I do after the Digitus DN-70543 Wireless USB Adapter driver installation is finished?
    How do I connect to a wireless network using the Digitus DN-70543 Wireless USB Adapter?
    What should I do if I need to enter security information to connect to a wireless network?
WIRELESS 300N USB 2.0
INTERNET ADAPTER
Quick Installation Guide
DN-70542 Rev.2 • DN-70543 Rev.2
2
Driver Installation
Please follow the below instructions to install the Wireless USB Adapter:
1. Insert the USB wireless network adapter into an available USB 2.0 port of
your computer. Please note that the USB connector side is directional, so
please flip the USB adapter when it cannot be inserted into the USB port.
2. The following message will appear on your computer, click ‘Cancel / Close’.
Windows 7/8/10
3. Insert the driver CD into your CD-ROM. You can see autorun
screen below. If not, you can double click ‘autorun.exe’ on
CD.
Click ‘Install Driver’ to start the installation procedure.
3
4. Installation wizard will then be shown. Click ‘Next’ to continue.
5. Insert the USB wireless network adapter (DN-70542/DN-70543) into an USB
2.0 port of your computer, the system will find the new hardware and will
install the drivers automatically.
4
6. Once the installation is finished the computer will be asked to reboot. You
can click ‘Finish’ and reboot the computer to finish the driver installation.
7. After finishing driver installation, click adapter utility from your taskbar or
programs folder. Click “available networks”, select the wireless access point
you would like to connect and press “Add to Profile” button.
5
8. Fill in the security information if necessary, and then click “OK” to connect to
the wireless network.
9. Once connection is successful, it will show the status screen.
6
The manual content may be changed. Please also refer to the latest version on the web shop.
Hereby Assmann Electronic GmbH, declares that the Declaration of Conformity is part of the
shipping content. If the Declaration of Conformity is missing, you can request it by post under
the below mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany
DN-70542
Technical Description
Frequency Range:
2412MHz-2472MHz for 802.11b, g, n/HT20
2422MHz-2462MHz for 802.11n/HT40
Transmit Power: < 20 dBm EIRP
Hardware Version: V1.1
Software Version: 1030.38
DN-70543
Technical Description
Frequency Range:
2412MHz-2472MHz for 802.11b, g, n/HT20
2422MHz-2462MHz for 802.11n/HT40
Transmit Power: < 20 dBm EIRP
Hardware Version: V1.0
Software Version: 1030.38
/