Digitus DN-70560 Quick start guide

Brand: Digitus

Model: DN-70560

Type: Quick start guide

The Digitus DN-70560 is a wireless USB adapter that allows you to connect your computer to a Wi-Fi network. It supports dual-band connectivity, meaning it can connect to both 2.4GHz and 5GHz networks, and it has a maximum speed of 433Mbps. The adapter is easy to install and use, and it comes with a driver CD that includes all the necessary software. With its compact size and wide compatibility, the Digitus DN-70560 is a great choice for anyone looking to add wireless connectivity to their computer.

The Digitus DN-70560 is a wireless USB adapter that allows you to connect your computer to a Wi-Fi network. It supports dual-band connectivity, meaning it can connect to both 2.4GHz and 5GHz networks, and it has a maximum speed of 433Mbps. The adapter is easy to install and use, and it comes with a driver CD that includes all the necessary software. With its compact size and wide compatibility, the Digitus DN-70560 is a great choice for anyone looking to add wireless connectivity to their computer.

Wireless 11AC 433Mbps Dual Band

USB 2.0 Adapter

Quick Installation Guide

DN-70560 • DN-70565

DN-70560

DN-70565

Driver Installation

Please follow the following instructions to install your new wireless USB

Adapter:

1. Insert the USB wireless network card into an empty USB 2.0 port

of your computer when computer is switched on. Never use force to insert

the card, if you feel it’s stuck, flip the card over and try again.

2. The following message will appear on your computer, click ‘Cancel / Close’.

Under Windows XP

Under Windows Vista and Windows 7/8 /10

3. Insert the driver CD into your CD-ROM. You can see autorun

screen below. if not, you can double click ‘autorun.exe’ on CD.

Click ‘Install Driver’ to start the installation procedure

4. Installation descriptions shown. Click ‘Next’ to continue

5. Once the installation is finished the computer will be asked to

reboot. you can click ‘Finish’ and reboot the computer to finish the

installation of driver files

6. Insert the USB wireless network card into an USB 2.0 port of your computer,

the system will find the new hardware and will install the drivers

automatically.

7. After finishing driver installation, click adapter utility from your taskbar or

programs folder. Click “available networks”, select the wireless access point

you would like to connect and press “Add to Profile” button.

8. Fill in the security information if any requirement, and then click “OK” to

connect the wireless network.

9. Connected successfully. It will show the status screen.

Hereby ASSMANN Electronic GmbH, declares that this device is in compliance with the

requirements of Directive 2014/53/EU and the Directive 2011/65/EU for RoHS compliance. The

complete declaration of conformity can be requested by post under the below mentioned

manufacturer address.

Warning:

This device is a class B product. This equipment may cause some radio interference in living

environment. In this case, the user can be requested to undertake appropriate measures to

prevent interference.

www.assmann.com

Assmann Electronic GmbH

Auf dem Schüffel 3

58513 Lüdenscheid

Germany

1
2
3
4
5
6

Digitus DN-70560 Quick start guide

Brand: Digitus

Model: DN-70560

Type: Quick start guide

The Digitus DN-70560 is a wireless USB adapter that allows you to connect your computer to a Wi-Fi network. It supports dual-band connectivity, meaning it can connect to both 2.4GHz and 5GHz networks, and it has a maximum speed of 433Mbps. The adapter is easy to install and use, and it comes with a driver CD that includes all the necessary software. With its compact size and wide compatibility, the Digitus DN-70560 is a great choice for anyone looking to add wireless connectivity to their computer.

Download PDF

Related papers

Other documents