Lexmark X644E - With Modem Taa/gov Quick Reference Manual

Brand: Lexmark

Model: X644E - With Modem Taa/gov

Category: Multifunctionals

Type: Quick Reference Manual

This manual is also suitable for

Lexmark™ X646

Quick Reference

Loading paper and

specialty media

Loading standard trays and

optional trays

Note: Do not remove a tray when a job is

printing or when the control panel

green indicator light is blinking.

Doing so may cause a jam.

1 Remove the tray from the MFP, and place it on

a flat, level surface.

2 Squeeze the side guide tab, and slide the guide

to the outer edge of the tray.

3 Squeeze the rear guide tab, and slide the guide

to the correct position for the size media you are

4 Flex the sheets back and forth to loosen them,

then fan them. Do not fold or crease the print

media. Straighten the edges on a level surface.

5 Place the print media in the tray:

• Print side facedown for single-sided printing

• Print side faceup for duplex printing

Note: Do not fill paper above the load line.

Overfilling the tray may cause jams.

6 Squeeze the side guide tab, and slide the guide

toward the inside of the tray until it lightly rests

against the edge of the media.

7 Insert the tray into the MFP.

Setting the Paper Type and Paper

Size

1 Make sure the MFP is on.

2 Touch the Menus button on the printer control

panel.

3 Touch Paper Menu.

4 To uch Paper Size.

5 Touch the left or right arrow to change the size

for the desired tray.

6 To uch Submit.

7 To uch Paper Type.

8 Touch the left or right arrow to change the

media type for the desired tray.

9 To uch Submit.

10 Touch the home icon.

Loading the multipurpose feeder

1 Push the release latch, and lower the

multipurpose feeder.

2 Pull the tray extension out.

3 Slide the width guide to the far right.

4 Flex the sheets or envelopes back and forth to

loosen them, then fan them. Do not fold or

Simplex

Duplex

crease the print media. Straighten the edges on

a level surface.

5 Load the media in the tray.

• Load paper or transparencies with the left

edge of the stack against the stack height

label and with the recommended print side

faceup.

• Load envelopes flap side down with the

stamp area and flap on the left. The end of

the envelope with the stamp area enters the

multipurpose feeder first.

Warning: Never use envelopes with stamps,

clasps, snaps, windows, coated

linings, or self-stick adhesives.

These envelopes may severely

damage the MFP.

• Follow the illustrations for loading the paper

according to your options.

6 Slide the side guide toward the inside of the tray

until it lightly rests against the edge of the

media.

7 Set the Paper Size and Paper Type for the

multipurpose feeder to the correct value for the

print media you loaded.

Closing the multipurpose feeder

1 Remove print media from the multipurpose

feeder.

2 Push the extension tray in.

3 Close the multipurpose feeder cover.

Copying

Making a copy

1 Place the original document face-up in the

automatic document feeder (ADF) or face-down

on the flatbed.

Adjust the paper guides when using the ADF.

2 Go on the numeric pad.

Note: If an LDSS profile has been

installed, you may receive an error

when attempting a quick copy.

Contact your system support

person for access.

Copying using the ADF

1 Place the original document face-up in the

automatic document feeder. Adjust the paper

guides when using the ADF.

2 To uch Copy on the home screen, or use the

numeric keypad to specify the number of copies

you want.

After touching Copy or entering the number of

copies, the touch screen will automatically

change to the copy settings menu.

3 Change the copy options to meet your

requirements.

4 To uch Copy It.

Copying using the scanner glass

1 Open the document cover.

2 Place the document facedown on the scanner

glass.

3 Close the document cover.

4 To uch Copy on the home screen, or press Go

on the numeric pad.

For Copy, continue with step 5.

For Go, proceed with step 8.

5 Set the number of copies.

6 Change the copy options to meet your

requirements.

7 To uch Copy It.

8 To uch Scan Next if you have more pages to

scan, or touch Finish the Job if you are done.

Touching Finish the Job returns the printer to

the copy screen.

Simplex (single sided)

Duplex

9 Touch Home when you are finished.

Copying from one size to another

1 Place your original document in the automatic

document feeder faceup, short-edge first.

2 Adjust the paper guides.

3 Touch Copy on the home screen.

4 Touch Copy from:, and then identify the size of

your original document.

For example, Legal.

5 Touch Copy to:, and then select the size you

want the copy to be.

Note: If you select a paper size that is

different from the “Copy from” size,

the printer will scale the size

automatically.

6 Touch Copy It.

Copying on both sides of the Paper

1 Place your original document in the automatic

document feeder faceup, short-edge first.

2 Adjust the paper guides.

3 Touch Copy on the home screen.

4 Touch the button that looks the way you want

your copies duplexed.

The first number represents sides of the original

documents; the second number represents

sides of the copy.

For example, select 1 --> 2-sided if you have 1-

sided original documents and you want 2-sided

copies.

5 Touch Copy It.

Coping a document that contains

mixed Paper sizes

You can place mixed-sized original documents in the

ADF and then copy them. Depending on the paper

size loaded in the trays, the scanner will print on the

same size media or scale the document to fit the

media in the tray.

Example 1: the MFP has two paper trays, one tray

loaded with letter and the other with legal paper. A

document mixed with letter and legal pages needs to

be copied.

1 Place your original document in the ADF face

up. Labels on the ADF show how to load the

paper based on its size.

2 Adjust the paper guides.

3 Touch Copy on the home screen.

4 Touch Copy From, and then touch Mixed

Sizes.

5 Touch Copy To, and then touch Auto Size

Match.

6 Touch Copy It.

The scanner will identify the different size pages

as they scan, and then print them on the correct

size paper.

Example 2: the MFP has one paper tray, loaded with

letter-size paper. A document mixed with letter and

legal pages needs to be copied.

1 Place your original document in the ADF face

up. Labels on the ADF show how to load the

paper based on its size.

2 Adjust the paper guides.

3 Touch Copy on the home screen.

4 Touch Copy From, and then touch Mixed

Sizes.

5 Touch Copy It.

The scanner will identify the different size pages

as they scan, and then scale the legal size

pages to print on letter size paper.

Copying multiple pages onto a

single sheet

1 Place your original document in the automatic

document feeder faceup, short-edge first.

2 Adjust the paper guides.

3 To uch Copy on the home screen.

4 Make your duplex choice.

5 To uch Options.

6 To uch Paper Saver.

7 Select the output you want.

For example, if you have four portrait-oriented

original documents that you want copied to the

same side of one sheet, touch 4 on 1 Portrait.

8 To uch Print Page Borders if you want a box

drawn around each page on the copies.

9 To uch Copy It.

Faxing

Sending a fax

1 Place your original document in the automatic

document feeder faceup, short-edge first.

2 Adjust the paper guides.

3 To uch Fax on the home screen.

4 Enter the fax number using the numbers on the

touch screen or keypad.

Add recipients by touching next and then

entering the recipient's telephone number or

shortcut number, or search the address book.

Note: To place a two-second dialing

pause within a fax number, use the

Dial Pause button.

The dial pause will appear as a comma in the

Fax to: box. Use this feature if you need to dial

an outside line first.

5 To uch Fax It.

Printing

Printing a document

1 Open the file you want to print.

2 From the File menu, select Print.

3 Verify that the correct printer is selected in the

dialog box.

4 Modify the printer settings as appropriate (such

as the pages you want to print or the number of

copies).

Note: Click Properties or Setup to adjust

printer settings not available from

the first screen, and click OK.

5 Click OK or Print to send the job to the selected

printer.

Printing a confidential job

1 With the file open, select File  Print.

2 Click Properties. (If there is no Properties

button, click Setup, and then click Properties.)

3 Depending on the operating system, you may

have to click the Other Options tab, and then

click Print and Hold.

4 Enter a User Name and PIN.

5 Send your job to the printer.

Go to the printer when you are ready to retrieve

your confidential print job.

6 Touch Held jobs on the home screen.

7 Touch your user name.

Note: If your name does not appear, touch

the down arrow until your name

appears, or touch Search Held

Jobs if there are a large number of

held jobs in the printer.

8 Select Confidential Jobs.

9 Enter your PIN.

10 Touch the job you want to print.

11 Touch Print, or touch + to input the number of

copies, and then touch Print.

Note: After your job prints, it is deleted

from printer memory.

Printing from a USB flash memory

device

1 Make sure the MFP is on and Ready or Busy

appears.

2 Insert a USB flash memory device into the USB

Direct interface.

Note: If you insert the memory device

when the MFP requires attention

such as when a paper jam has

occurred, the MFP ignores the

memory device.

3 Touch the arrow next to the document you want

to print.

A screen asking the number of copies to be

printed will appear.

4 To print only one copy, touch Print, or touch + to

enter the number of copies.

Note: Do not remove the USB flash

memory device from the USB Direct

interface until the document has

finished printing.

Canceling a job from the printer

control panel

If the job is formatting, scanning, or already printing,

touch Cancel Job on the display.

Maintaining the printer

Cleaning the scanner glass

1 Open the document cover.

2 Dampen a clean, lint-free cloth or cotton swab

with isopropyl alcohol (95%).

3 Wipe the flatbed and backing material by

moving the cloth or swab from side to side.

4 Close the document cover.

Backing material

Scanner glass

Lexmark X644E - With Modem Taa/gov Quick Reference Manual

Brand: Lexmark

Model: X644E - With Modem Taa/gov

Category: Multifunctionals

Type: Quick Reference Manual

This manual is also suitable for

Download PDF

report

Lexmark X644E - With Modem Taa/gov Quick Reference Manual

This manual is also suitable for

Lexmark X644E - With Modem Taa/gov Quick Reference Manual

Related papers

Other documents