Sony HT-CT380 Operating instructions

Type
Operating instructions

This manual is also suitable for

HT-CT380/CT780
4-565-123-54(1)
HT-CT380/CT780
4-565-123-51(1)
HT-CT380/CT780HT-CT380/CT780
Sound BarSound Bar
GB
Operating Instructions
FR
Guide de référence
PR
AR
4-565-123-54(1)©2015 Sony Corporation Printed in Malaysia
HT-CT380/CT780
4-565-123-52(1)
HT-CT380/CT780
4-565-123-52(1)
2
GB
HT-CT380/CT780
4-565-123-52(1)
C:\Users\Win7P3i5P2\Desktop\4565123521\4565123521HTCT780E3EA3\0
1GB-HTCT780E3EA3\020REG.fm
masterpage: Left
Do not install the appliance in a
confined space, such as a bookcase or
built-in cabinet.
To reduce the risk of fire, do not cover
the ventilation opening of the appliance
with newspapers, tablecloths, curtains,
etc.
Do not expose the appliance to naked
flame sources (for example, lighted
candles).
To reduce the risk of fire or electric
shock, do not expose this appliance to
dripping or splashing, and do not place
objects filled with liquids, such as vases,
on the appliance.
The unit is not disconnected from the
mains as long as it is connected to the
AC outlet, even if the unit itself has been
turned off.
As the main plug is used to disconnect
the unit from the mains, connect the
unit to an easily accessible AC outlet.
Should you notice an abnormality in the
unit, disconnect the main plug from the
AC outlet immediately.
Do not expose batteries or appliances
with battery-installed to excessive heat,
such as sunshine and fire.
Indoor use only.
Recommended cables
Properly shielded and grounded cables
and connectors must be used for
connection to host computers and/or
peripherals.
For the Bar Speaker
The nameplate is located on the
bottom.
This system incorporates Dolby* Digital
and the DTS** Digital Surround System.
* Manufactured under license from
Dolby Laboratories.
Dolby, and the double-D symbol are
trademarks of Dolby Laboratories.
** For DTS patents, see http://
patents.dts.com. Manufactured
under license from DTS Licensing
Limited. DTS, DTS-HD, the Symbol, &
DTS and the Symbol together are
registered trademarks of DTS, Inc. ©
DTS, Inc. All Rights Reserved.
The BLUETOOTH
®
word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under
license.
This system incorporates High-
Definition Multimedia Interface
(HDMI™) technology.
The terms HDMI and HDMI High-
Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered
trademarks of HDMI Licensing LLC in the
United States and other countries.
The N Mark is a trademark or registered
trademark of NFC Forum, Inc. in the
United States and in other countries.
Android™ and Google Play™ are
trademarks of Google Inc.
WARNING
Copyrights and Trademarks
2
AR
HT-CT380/CT780
4-565-123-52(1)
ﺮﻳﺬﺤﺗ
وا ﺐﺘﻜﻟا ﺔﻧاﺰﺧ ﻞﺜﻣ ،رﻮﺼﺤﻣ نﺎﻜﻣ ﰲ زﺎﻬﺠﻟا ﺐّﻛﺮﺗ
.ﺔﻴﻠﺧاد ﺔﻨﻴﺑﺎﻛ
زﺎﻬﺠﻟا ﺔﻳﻮﻬﺗ تﺎﺤﺘﻓ ﻲﻄﻐﺗ ﻻ ،ﻖﻳﺮﺣ بﻮﺸﻧ ﺮﻄﺧ ﻞﻴﻠﻘﺘﻟ
.ﺦﻟا ،ﺮﺋﺎﺘﺴﻟا ،ةﺪﺋﺎﳌا ﺔﻴﻄﻏا ،ﻒﺤﺼﻟا قرﻮﺑ
ﻞﻴﺒﺳ ﲆﻋ) ﺔﻓﻮﺸﻜﳌا ﺐﻬﻠﻟا ردﺎﺼﻣ ﱃا زﺎﻬﺠﻟا ض
ّ
ﺮﻌﺗ
.(ﺔﻠﻌﺘﺸﻣ عﻮﻤﺷ ،لﺎﺜﳌا
ض
ّ
ﺮﻌﺗ ،ﺔﻴﺋﺎﺑﺮﻬﻜﻟا ﺔﻣﺪﺼﻟا وا ﻖﻳﺮﺣ بﻮﺸﻧ ﺮﻄﺧ ﻞﻴﻠﻘﺘﻟ
مﺎﺴﺟا ﻊﻀﺗ ﻻو ،ﻞﺋاﻮﺴﻟا قﺎﺸﺗرا وا تاﺮﻄﻗ ﱃا زﺎﻬﺠﻟا
.زﺎﻬﺠﻟا ﲆﻋ ،تﺎﻳﺮﻫﺰﳌا ﻞﺜﻣ ،ﻞﺋاﻮﺴﻟﺎﺑ ةءﻮﻠﻤﻣ
ﺎﻬﻧا ﺎﳌﺎﻃ ﺔﻴﺴﻴﺋﺮﻟا ﺔﻗﺎﻄﻟا ﻦﻣ ﺔﻟﻮﺼﻔﻣ ﻏ ةﺪﺣﻮﻟا هﺬﻫ
ةﺪﺣﻮﻟا ﺖﻧﺎﻛ اذا ﻰﺘﺣ ،
AC ددﱰﳌا رﺎﻴﺘﻟا ﺔﺤﺘﻓ ﻊﻣ ﺔﻟﻮﺻﻮﻣ
.ﻞﻴﻐﺸﺘﻟا ﻦﻋ ﺔﻔﻗﻮﺘﻣ ﺎﻬﺴﻔﻧ
ﻦﻣ ةﺪﺣﻮﻟا ﻞﺼﻔﻟ ﻞﻤﻌﺘﺴﻣ ﺔﻴﺴﻴﺋﺮﻟا ﺔﻗﺎﻄﻟا ﺲﺑﺎﻗ نﻻ
AC ددﱰﻣ رﺎﻴﺗ ﺔﺤﺘﻓ ﻊﻣ ةﺪﺣﻮﻟا ﻞﺻوا ،ﺔﻴﺴﻴﺋﺮﻟا ﺔﻗﺎﻄﻟا
ﻲﻌﻴﺒﻃ ﻏ ءﳾ يا ﺖﻈﺣ اذا .ﺎﻬﻴﻟا لﻮﺻﻮﻟا ﻞﻬﺳ
رﺎﻴﺘﻟا ﺔﺤﺘﻓ ﻦﻣ ﺔﻴﺴﻴﺋﺮﻟا ﺔﻗﺎﻄﻟا ﺲﺑﺎﻗ ﻞﺼﻓا ،ةﺪﺣﻮﻟا
.
ً
ار
AC ددﱰﳌا
ﺎﻬﻠﺧاﺪﺑ ﺔﺒﻛﺮﻣ تﺎﻳرﺎﻄﺒﻟاو ةﺰﻬﺟﻻا وا تﺎﻳرﺎﻄﺒﻟا ض
ّ
ﺮﻌﺗ
.رﺎﻨﻟاو ﺲﻤﺸﻟا ﺔﻌﺷا ﻞﺜﻣ ،ةﺪﺋاﺰﻟا ةراﺮﺤﻠﻟ
.ﻂﻘﻓ ﺔﻘﻠﻐﳌا ﻦﻛﺎﻣﻷا ماﺪﺨﺘﺳﻼﻟ
ﺎﻬﺑﻮﳌا تﻼﺑﺎﻜﻟا
ﻞﻜﺸﺑ ﺔﺿرﺆﻣو ﺔﻴﻤﺤﻣ تﻼﺻﻮﻣو تﻼﺑﺎﻛ ماﺪﺨﺘﺳا ﺐﺠﻳ
ةﺰﻬﺟﻷا وأ/و ﺔﻔﻴﻀﳌا ﺮﺗﻮﻴﺒﻤﻜﻟا ةﺰﻬﺟﺄﺑ ﻞﻴﺻﻮﺘﻠﻟ ﺪﻴﺟ
.ﺔﻴﻓﺮﻄﻟا
ﻞﻳﻮﻄﻟا تﻮﺼﻟا ﱪﻜﳌ ﺔﺒﺴﻨﻟﺎﺑ
.ﲇﻔﺴﻟا ﺐﻧﺎﺠﻟا ﰲ ﻢﺳﻻا ﺔﺣﻮﻟ ﺪﺟﻮﺗ
ﺔﻳرﺎﺠﺘﻟا تﺎﻣﻼﻌﻟا و ﴩﻨﻟا قﻮﻘﺣ
Dolby* Digital مﺎﻈﻨﻟا اﺬﻫ ﻞﻤﺸﻳ
.
DTS** Digital Surround System و
Dolby تاﱪﺘﺨﻣ ﻦﻣ ﺺﻴﺧﺮﺗ ﺖﺤﺗ ﻊﻨﺼﻣ *
.
Laboratories
ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋ ﻲﻫ D-جودﺰﳌا ﺰﻣﺮﻟاو Dolby
.Dolby Laboratories تاﱪﺘﺨﳌ
تاءاﺮﺑ لﻮﺣ
http://patents.dts.com ﻊﺟار **
ﻦﻣ ﺺﻴﺧﺮﺗ ﺖﺤﺗ ﻊﻨﺼﻣ .DTS عاﱰﺧا
DTS-HD و DTS .DTS Licensing Limited
ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋ ﻲﻫ
ً
ﺎﻌﻣ ﺰﻣﺮﻟاو DTS & و ﺰﻣﺮﻟاو
ﺔﻛﴩﻟ
© ﴩﻨﻟا قﻮﻘﺣ .DTS, Inc. ﺔﻛﴩﻟ ﺔﻠﺠﺴﻣ
.ﺔﻇﻮﻔﺤﻣ قﻮﻘﺤﻟا ﻊﻴﻤﺟ .
DTS, Inc.
تﺎﻣﻼﻋ ﻲﻫ تارﺎﻌﺸﻟاو BLUETOOTH® ﺔﻤﻠﻜﻟا ﺔﻣﻼﻋ
Bluetooth SIG, Inc. ﺔﻛ ﺎﻬﻜﻠﺘ ﺔﻠﺠﺴﻣ ﺔﻳرﺎﺠﺗ
Sony ﺔﻛﴍ ﺔﻄﺳاﻮﺑ تﺎﻣﻼﻌﻟا هﺬﻬﻟ لﻌﺘﺳا ياو
.ﺺﻴﺧﺮﺗ ﺖﺤﺗ ﻮﻫ
Corporation
High-Definition
ﺔﻴﻨﻘﺗ مﺎﻈﻨﻟا اﺬﻫ ﻞﻤﺸﻳ
.
Multimedia Interface (HDMI™)
HDMI High-Definition
و HDMI ﺢﻠﻄﺼﳌا
ﻲﻫ
HDMI رﺎﻌﺸﻟاو ،Multimedia Interface
ﺔﻛﴩﻟ ﺔﻠﺠﺴﻣ ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋ وا ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋ
ناﺪﻠﺒﻟاو ةﺪﺤﺘﳌا تﺎﻳﻮﻟا
HDMI Licensing LLC
ﺮﺧﻻا
ﺔﻠﺠﺴﻣ ﺔﻳرﺎﺠﺗ ﺔﻣﻼﻋ وا ﺔﻳرﺎﺠﺗ ﺔﻣﻼﻋ ﻲﻫ
N ﺔﻣﻼﻌﻟا
ﺔﻴﻜﻳﺮﻣﻷا ةﺪﺤﺘﳌا تﺎﻳﻮﻟا ﰲ
NFC Forum, Inc. ﺔﻛﴩﻟ
ﺮﺧﻻا ناﺪﻠﺒﻟاو
ﺔﻳرﺎﺠﺗ تﺎﻣﻼﻋ ﻲﻫ
Google Play™ و Android™
.Google Inc. ﺔﻛﴩﻟ
AR
3
GB
Apple, the Apple logo, iPhone, iPod, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other
countries. App Store is a service mark of
Apple Inc.
“Made for iPod,” and “Made for iPhone”
mean that an electronic accessory has
been designed to connect specifically to
iPod or iPhone, respectively, and has
been certified by the developer to meet
Apple performance standards. Apple is
not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that
the use of this accessory with iPod or
iPhone may affect wireless
performance.
Compatible iPod/iPhone models
The compatible iPod/iPhone models
are as follows. Update your iPod/iPhone
with the latest software before using
with the system.
BLUETOOTH technology works with:
iPhone 6 Plus/iPhone 6/iPhone 5s/
iPhone 5c/iPhone 5/iPhone 4s/
iPhone 4/iPhone 3GS
iPod touch (5th generation)/iPod touch
(4th generation)
“BRAVIA” logo is a trademark of Sony
Corporation.
“DSEE” is a trademark of Sony
Corporation.
“ClearAudio+” is a trademark of Sony
Corporation.
“x.v.Colour” and “x.v.Colour” logo are
trademarks of Sony Corporation.
“PlayStation
®
” is a registered trademark
of Sony Computer Entertainment Inc.
Other trademarks and trade names are
those of their respective owners.
GB
4
GB
About these operating
instructions
The instructions in these Operating
Instructions describe the controls on
the remote control. You can also use
the controls on the main unit if they
have the same or similar names as
those on the remote control.
Some illustrations are presented as
conceptual drawings, and may be
different from the actual products.
5
GB
Table of Contents
About these operating
instructions .......................... 4
Listening
Listening to sound from a TV,
Blu-ray Disc™ player, cable/
satellite box, etc. ................. 6
Listening to music from a
BLUETOOTH device ............. 6
Sound Adjustment
Enjoying sound effects (Sports
mode, etc.) .......................... 9
BLUETOOTH Functions
Controlling the system using a
smartphone or tablet
device (SongPal) .................10
Viewing Copyright-protected
4K Content (HT-CT780 only)
Connecting to a 4K TV and 4K
devices ............................. 12
Settings and Adjustments
Using the setup display ........ 14
Other Functions
Using the Control for HDMI
function ............................... 17
Using “BRAVIA” Sync
features ...............................18
Using the parental lock
function ...............................19
Saving power in standby
mode ...................................19
Mounting the Bar Speaker on
a wall .................................. 20
Installing the subwoofer
horizontally (HT-CT380
only) ....................................22
Linking the system (Link to the
subwoofer) .........................22
Additional Information
Precautions ...............................23
Troubleshooting ...................... 24
Guide to parts and controls .... 29
Supported audio formats .........33
Specifications ...........................35
On BLUETOOTH
communication ..................37
END USER LICENSE
AGREEMENT ....................... 38
Connecting
Startup Guide (separate document)
6
GB
Listening to sound from a
TV, Blu-ray Disc™ player,
cable/satellite box, etc.
Press INPUT repeatedly.
When you press INPUT once, the current
device appears on the front display,
then each time you press INPUT, the
device changes cyclically as follows.
[TV] [HDMI 1] [HDMI 2] [HDMI 3]
[ANALOG] [BT]
If the BLUETOOTH functions are disabled,
[BT OFF] appears instead of [BT].
Listening to music from a
BLUETOOTH device
Pairing is the process required to create
a link between BLUETOOTH devices to
allow wireless connection. You must
pair a device with the system before you
start using the system.
Once BLUETOOTH devices are paired,
there is no need to pair them again.
1 Press PAIRING on the system.
The BLUETOOTH indicator (blue)
flashes quickly during BLUETOOTH
pairing.
2 Turn on the BLUETOOTH function
on the BLUETOOTH device, search
for devices and select this system
(HT-CT380 or HT-CT780).
If a Passkey is requested, enter
“0000.”
3 Make sure that the BLUETOOTH
indicator (blue) lights up.
Connection has been established.
You can pair up to 9 BLUETOOTH
devices. If the 10th BLUETOOTH
device is paired, the least recently
connected device will be replaced by
the new one.
Listening
[TV]
Digital device that is connected to the
DIGITAL IN (TV) jack or TV compatible with
the Audio Return Channel function that is
connected to HDMI OUT (ARC) jack
[HDMI 1] [HDMI 2] [HDMI 3]
Blu-ray Disc player, etc. that is connected to
the HDMI IN 1, 2, or 3 jack
[ANALOG]
Analog device that is connected to the
ANALOG IN jack
[BT]
BLUETOOTH device that supports A2DP
Tip
Pairing this system with a
BLUETOOTH device
Note
7
GB
Listening
Once the BLUETOOTH connection is
established, an indication
recommending which application to
download will be displayed,
according to what equipment you
have connected. Following the
instructions displayed, an application
called “SongPal,” which will enable
you to operate this system, can be
downloaded. Refer to “Controlling
the system using a smartphone or
tablet device (SongPal)” (page 10).
1 Press INPUT repeatedly to display
[BT].
The BLUETOOTH indicator (blue)
flashes during attempting
BLUETOOTH pairing.
2 On the BLUETOOTH device, select
this system (HT-CT380 or
HT-CT780).
3 Make sure that the BLUETOOTH
indicator (blue) lights up.
4 Start playback on the BLUETOOTH
device.
By holding an NFC-compatible remote
device near to the N-Mark on the
system, the system and remote device
proceed to complete pairing and the
BLUETOOTH connection automatically.
1 Download, install, and start the
“NFC Easy Connect” application.
The application may not be available
in some countries/regions.
2 Hold the remote device near to
the N-Mark on the system until the
remote device vibrates.
3 Make sure that the BLUETOOTH
indicator (blue) lights up.
Connection has been established.
You can connect only one device at a
time.
Depending on a smartphone, you may
need to set the NFC function to on
beforehand. Refer to the operating
instructions of the smartphone.
Tip
Listening to music of the
registered device
Connecting to a BLUETOOTH
device by One-touch
functions (NFC)
Compatible remote devices
Remote devices with a built-in NFC
function
(OS: Android 2.3.3 or later, excluding
Android 3.x)
Note
Notes
8
GB
If pairing and the BLUETOOTH connection
fail, do the following.
Relaunch “NFC Easy Connect” and move
the remote device slowly over the
N-Mark.
Remove the case from the remote
device if using a commercially available
remote device case.
Tip
9
GB
Sound Adjustment
Enjoying sound effects
(Sports mode, etc.)
You can easily enjoy pre-programmed
sound fields that are tailored to different
kinds of sound sources.
Press SOUND FIELD repeatedly until
the desired sound field appears on
the front panel display.
* DSEE stands for Digital Sound
Enhancement Engine, a high range
compensation and fine sound restoration
technology developed independently by
Sony.
Sounds are played back enhanced with
sound effects and clarity of dialog.
Press NIGHT to display [N. ON].
To inactivate the Night mode, press
NIGHT to display [N. OFF].
The Voice mode helps make dialogs
clearer.
Press VOICE repeatedly to display the
desired type.
Sound Adjustment
Selecting the sound field
[CLEARAUDIO+]
The suitable sound setting is automatically
selected for the sound source.
[STANDARD]
Corresponds to every source.
[MOVIE]
Sounds are played back with surround
effects, and they are realistic and powerful,
making them suitable for movies.
[SPORTS]
Commentary is clear, cheers are heard as
surround-sound, and sounds are realistic.
[GAME]
Sounds are powerful and realistic, suitable
for game play.
[MUSIC]
Sounds are played back to suit to a music
program, music Blu-ray Disc, or DVD.
[P.AUDIO (Portable audio)]
Sounds are played back to suit to a portable
music player using DSEE*.
Setting the Night mode
Setting the Voice mode
[TYPE 1]
Dialog range is outputted directly.
[TYPE 2]
Dialog range is stressed.
[TYPE 3]
The range of dialogue is highlighted, and in
treble parts with low volume difficult to be
discerned by the elderly are boosted.
10
GB
Controlling the system
using a smartphone or
tablet device (SongPal)
“SongPal” is the application to operate
the system with your smartphone or
tablet, etc.
“SongPal” is available from either
Google Play or App Store.
This function is enabled by setting [BT
PWR] to [ON] (page 15). The default
setting is [ON].
1 Press / (on/standby) on the
remote control.
The display of the Bar Speaker lights
up.
2 Search for “SongPal” with the
Android device and download
that application.
3 Run “SongPal” then follow the on-
screen instructions.
If the display for NFC connection
appears, see “One-Touch connection
using the Android device with the
NFC function built-in (NFC).”
4 After the BLUETOOTH connection
display appears on the Android
device, press PAIRING.
The BLUETOOTH indicator (blue)
flashes quickly during BLUETOOTH
pairing.
5 Select this system (HT-CT380 or
HT-CT780) from the BLUETOOTH
device list of the Android device.
When the connection has been
established, the BLUETOOTH
indicator (blue) lights up.
6 Operate the system with the
display of the connected Android
device.
One-Touch connection using the
Android device with the NFC
function built-in (NFC)
1 Perform steps 1 to 3 of “When
using an Android device.”
2 After the BLUETOOTH connection
display appears on the Android
device, touch the Android device
with the N-Mark on the Bar
Speaker.
When the connection has been
established, the BLUETOOTH
indicator (blue) lights up.
3 Operate the system with the
display of the Android device.
1 Press / (on/standby) on the
remote control.
The display of the Bar Speaker lights
up.
2 Press PAIRING.
The BLUETOOTH indicator (blue)
flashes quickly during BLUETOOTH
pairing.
BLUETOOTH Functions
When using an Android
device
Tip
When using an iPhone/iPod
touch
11
GB
BLUETOOTH Functions
3 Set the iPhone/iPod touch to
pairing mode and select this
system (HT-CT380 or HT-CT780)
from the BLUETOOTH device list
on the iPhone/iPod touch.
When the connection has been
established, the BLUETOOTH
indicator (blue) of the Bar Speaker
lights up.
4 Search for “SongPal” with the
connected iPhone/iPod touch and
download that application.
5 Run “SongPal” then operate the
system with the display of the
iPhone/iPod touch.
12
GB
Connecting to a 4K TV and 4K devices
To view copyright-protected 4K content, connect the devices via an HDCP 2.2-
compatible HDMI jack on each end. Copyright-protected 4K content can be viewed
only by a connection via HDCP 2.2-compatible HDMI jacks. Refer to the TV’s
operating instructions as to whether or not the HDMI jack on the TV is HDCP 2.2-
compatible.
The HDMI 1 INPUT jack of the Bar Speaker is compatible with HDCP 2.2.
The ARC (Audio Return Channel) function sends digital sound from a TV to this system or
an AV amplifier using just an HDMI cable.
Viewing Copyright-protected 4K Content (HT-CT780 only)
When the TV’s HDMI jack is HDCP 2.2-compatible and labeled
with ARC
HDCP 2.2-
compatible
HDMI jack
Blu-ray Disc player, cable
box or satellite box, etc.
HDMI cable (High Speed type, not
supplied)
HDMI cable (High Speed type, not
supplied)
HDCP 2.2-
compatible
HDMI jack
Tips
13
GB
Viewing Copyright-protected 4K Content (HT-CT780 only)
Connect the optical digital cable to the optical output jack of the TV, and an HDMI
cable to the HDCP 2.2-compatible HDMI input jack.
The HDMI 1 INPUT jack of the Bar Speaker is compatible with HDCP 2.2.
When the TV’s HDMI jack is HDCP 2.2-compatible and not
labeled with ARC
Optical digital cable (supplied)
HDMI cable (High Speed type, not supplied)
HDMI cable (High Speed type, not supplied)
HDCP 2.2-
compatible
HDMI jack
Blu-ray Disc player, cable
box or satellite box, etc.
HDCP 2.2-
compatible
HDMI jack
Tip
14
GB
Using the setup display
You can set the following items with the menu.
Your settings are retained even if you disconnect the AC power cord (mains lead).
1 Press MENU to turn on the menu on the front panel display.
2 Press BACK/ (select)/ENTER repeatedly to select the item and press ENTER
to decide the setting.
3 Press MENU to turn off the menu.
The default settings are underlined.
Settings and Adjustments
Menu list
Menu items Function
[LEVEL]
(Level)
[DRC]
(Dynamic range
control)
Useful for enjoying movies at low sound volume. DRC
applies to Dolby Digital sources.
[ON]: Compresses sound in accordance with the
information contained in the content.
•[AUTO
]: Automatically compresses sound encoded in
Dolby TrueHD.
[OFF]: Sound is not compressed.
[TONE]
(Tone)
[BASS]
(Bass)
Adjusts the bass level.
The parameters range from [–6] to [+6] in 1-step
increments.
[TREBLE]
(Treble)
Adjusts the treble level.
The parameters range from [–6] to [+6] in 1-step
increments.
[AUDIO]
(Audio)
[SYNC] (AV sync) You can adjust the sound when the image and the sound
are not in sync.
[ON]: Turns on the AV Sync function.
•[OFF
]: Turns off the AV Sync function.
[DUAL]
(Dual mono)
You can enjoy multiplex broadcast sound when the system
receives a Dolby Digital multiplex broadcast signal.
• [M/S]: Main sound is output from the left speaker and sub
sound is output from the right speaker.
•[MAIN
]: Outputs only the main channel.
[SUB]: Outputs only the sub channel.
[EFFECT]
(Sound effect)
•[ON
]: The sound of the selected sound field is played. It is
recommended to use this setting.
[OFF]: The input source is down-mixed for 2 channels.
• Even if [EFFECT] is set to [OFF], [EFFECT] is automatically set
to [ON] when you change the sound field setting.
Note
15
GB
Settings and Adjustments
[AUDIO]
(Audio)
[STREAM]
(Stream)
Shows the current audio stream information.
See page 34 on the supported audio formats.
[HDMI] [CTRL]
(Control for HDMI)
•[ON
]: Turns on the Control for HDMI function.
[OFF]: Turns off the function. Select this setting when you
want to connect a device not compatible with the Control
for HDMI function.
[S. THRU]
(Standby-through)
You can set the power saving mode of the HDMI standby-
through function.
•[AUTO
]: Outputs signals from the HDMI OUT jack of the
system in standby mode according to the status of the TV.
This setting saves power in standby mode compared with
the [ON] setting.
[ON]: Always outputs signals from the HDMI OUT jack in
standby mode. If any TV other than “BRAVIA” is connected,
use the system with the [ON] setting.
This item appears only when [CTRL] is set to [ON].
[ARC]
(Audio Return
Channel)
Set this item to listen to digital sound from a TV compatible
with the Audio Return Channel (ARC) technology that is
connected using a High Speed HDMI cable.
•[ON
]: Turns on the ARC function.
[OFF]: Turns off the ARC function.
This item appears only when [CTRL] is set to [ON].
[SET BT]
(Set
BLUETOOTH)
[BT PWR]
(BLUETOOTH
power)
Turns on or off the BLUETOOTH function of this system.
•[ON
]: Turns on the BLUETOOTH function.
[OFF]: Turns off the BLUETOOTH function.
If you change the setting to [OFF], the BLUETOOTH
function is disabled.
[BT.STBY]
(BLUETOOTH
standby)
When the system has pairing information, the system is in
BLUETOOTH standby mode even when it is turned off.
•[ON
]: BLUETOOTH standby mode is enabled.
[OFF]: BLUETOOTH standby mode is disabled.
If the system does not have pairing information,
BLUETOOTH standby mode cannot be set.
[AAC]
(Advanced audio
coding)
You can set whether or not the system uses AAC via
BLUETOOTH.
•[ON
]: The system uses AAC via BLUETOOTH.
[OFF]: The system does not use it.
If you change the setting when the system is connected
with a BLUETOOTH device, the system will be
disconnected from the device.
Menu items Function
Note
Note
Note
Note
Note
16
GB
*HT-CT780 only
[SYSTEM]
(System)
[A. STBY]
(Auto standby)
You can reduce power consumption. The system enters
standby mode automatically when you do not operate the
system for about 20 minutes and the system is not receiving
an input signal.
•[ON
]: Turns on the auto standby function.
[OFF]: Turns off the function.
[VER] (Version) The current firmware version information appears on the
front panel display.
[SYS.RST]
(System reset)
You can reset menus and settings (sound fields, etc.) of the
system to the initial status when it does not work properly
(page 28).
[UPDATE]*
(Update)
Updates will be announced on the Sony website. Update the
system following the instructions on the website.
[WS]
(Wireless
sound)
[LINK] You can link the wireless sound system again (page 22).
[RF CHK]
(RF check)
You can check whether the wireless sound system of the
system can communicate or not.
[OK]: The wireless sound system is working.
[NG]: The wireless sound system is not working.
Menu items Function
17
GB
Other Functions
Using the Control for
HDMI function
By using the Control for HDMI function,
and connecting a device that is
compatible with the Control for HDMI
function via an HDMI cable (High Speed
type), operation is simplified with the
features below.
The Control for HDMI function is
enabled by setting [CTRL (Control for
HDMI)] to [ON] (page 15). The default
setting is [ON].
Control for HDMI is a mutual control
function standard used by HDMI CEC
(Consumer Electronics Control) for HDMI
(High-Definition Multimedia Interface).
System Power Off
When you turn off the TV, the system
and the connected device will turn off
automatically.
System Audio Control
If you turn on the system while you are
watching the TV, the TV sound will be
output from the speakers of the system
automatically.
The volume of the system will be
adjusted when you adjust the volume
using the TV’s remote control.
If the TV sound was output from the
speakers of the system the last time you
watched the TV, the system will be
turned on automatically when you turn
on the TV again.
Audio Return Channel (ARC)
If the TV is compatible with the Audio
Return Channel (ARC) technology, an
HDMI cable connection will allow you to
listen to the TV sound from the speakers
of the system.
The ARC function is enabled by setting
[ARC (Audio return channel)] to [ON]
(page 15). The default setting is [ON].
One-Touch Play
When you activate the device (Blu-ray
Disc player, “PlayStation
®
4,” etc.)
connected to the system with a High
Speed HDMI cable, the connected TV is
turned on automatically and the
input signal of the system is switched to
the appropriate HDMI input.
Home Theatre Control
If a Home Theatre Control-compatible
TV is connected to the system, the
system menu appears on the connected
TV. You can switch an input of the
system or switch sound fields by using
the remote control of your TV. You can
also adjust the settings of voice level,
subwoofer volume, treble, bass, night
mode, Dual Mono, or A/V Sync.
Your TV must be able to access a
broadband service to use the Home
Theatre Control function.
The above features may not operate with
certain device.
Depending on the settings of the
connected device, the Control for HDMI
function may not work correctly. Refer to
the operating instructions of the device.
Other Functions
Notes
18
GB
Using “BRAVIA” Sync
features
The original Sony functions listed below
can also be used with products that are
compatible with “BRAVIA” Sync.
Power save
If a “BRAVIA” Sync-compatible TV is
connected to the system, the power
consumption will be reduced in standby
mode by stopping HDMI signal
transmission when the TV is turned off
with the HDMI standby-through
function* of the system set to [AUTO]
(page 15). The default setting is [AUTO].
If any TV other than “BRAVIA” is
connected, set the item to [ON]
(page 15).
* The HDMI standby-through function is
used to output the signals from the HDMI
OUT jack of this system even if it is in
standby mode.
Notes on HDMI connections
Use a High Speed HDMI cable. If you
use a Standard HDMI cable, 1080p,
Deep Color, 3D, and 4K content may
not be displayed properly.
Use an HDMI-authorized cable.
Use a Sony High Speed HDMI cable
with the Cable Type Logo.
We do not recommend using an
HDMI-DVI conversion cable.
Check the setup of the connected
equipment if an image is poor or the
sound does not come out of the
equipment connected via the HDMI
cable.
Audio signals (sampling frequency, bit
length, etc.) transmitted from an HDMI
jack may be suppressed by the
connected equipment.
Sound may be interrupted when the
sampling frequency or the number of
channels of audio output signals from
the playback equipment is switched.
If the connected equipment is not
compatible with copyright-protection
technology (HDCP), the image and/or
the sound from the HDMI OUT jack of
this system may be distorted or may
not be output. In such a case, check
the specifications of the connected
equipment.
When “TV” is selected as the input
source of the system, video signals via
one of the HDMI IN 1/2/3 jacks
selected last time are output from the
HDMI OUT jack.
This system supports Deep Color,
“x.v.Colour,” 3D, and 4K transmission.
To enjoy 3D content, connect a 3D-
compatible TV and video equipment
(Blu-ray Disc player, “PlayStation
®
4,”
etc.) to the system using High Speed
HDMI cables, put on 3D glasses, and
then play back a 3D-compatible Blu-
ray Disc, etc.
To enjoy 4K content, the TV and
players that are connected to the
system must be compatible with 4K
content.
19
GB
Other Functions
Using the parental lock
function
Buttons on the Bar Speaker, except for
the
/ (on/standby) button, will be
disabled.
Press INPUT on the Bar Speaker for
about 5 seconds when the system is
on.
[LOCKED] appears on the display.
To cancel the parental lock function,
press INPUT again for about 5 seconds
to display [UNLOCK].
Saving power in standby
mode
Check that you have made the following
settings:
– [CTRL] in [HDMI] is set to [OFF]
(page 15).
– [S. THRU] in [HDMI] to [AUTO]
(page 15).
20
GB
Mounting the Bar
Speaker on a wall
You can mount the Bar Speaker on a
wall.
Prepare screws (not supplied) that are
suitable for the wall material and
strength. As a plasterboard wall is
especially fragile, attach the screws
securely to two studs in the wall beam.
Install the Bar Speaker horizontally, hung
by screws in studs in a continuous flat
section of the wall.
Be sure to subcontract the installation to
Sony dealers or licensed contractors and
pay special attention to safety during the
installation.
Sony shall not be held responsible for
accidents or damage caused by improper
installation, insufficient wall strength,
improper screw installation or natural
calamity, etc.
1 Fix the supplied wall mounting
brackets to the bracket fixing
holes on the bottom of the Bar
Speaker with the supplied screws
so that the surface of each wall
mounting bracket is as shown in
the illustration.
Fix the two wall mounting brackets
to the left and right fixing holes on
the bottom of the Bar Speaker.
Illustrative example: HT-CT780
Notes
AC power cord (mains lead)
Screw (supplied)
Wall mounting bracket
(supplied)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131
  • Page 132 132
  • Page 133 133
  • Page 134 134
  • Page 135 135
  • Page 136 136
  • Page 137 137
  • Page 138 138
  • Page 139 139
  • Page 140 140
  • Page 141 141
  • Page 142 142
  • Page 143 143
  • Page 144 144
  • Page 145 145
  • Page 146 146
  • Page 147 147
  • Page 148 148
  • Page 149 149
  • Page 150 150
  • Page 151 151
  • Page 152 152
  • Page 153 153
  • Page 154 154
  • Page 155 155
  • Page 156 156
  • Page 157 157
  • Page 158 158
  • Page 159 159
  • Page 160 160
  • Page 161 161
  • Page 162 162
  • Page 163 163
  • Page 164 164
  • Page 165 165
  • Page 166 166

Sony HT-CT380 Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages