Eagle Group Herman Miller Installation guide

Eagle Group
Brand
Eagle Group
Model
Herman Miller
Category
Multimedia carts & stands
Type
Installation guide
ASSEMBLY INSTRUCTIONS
Case Cart – Herman Miller
EG9885 Re
vised 10/05
Eagle F
oodser
vice Equipment, Eagle MHC
, SpecF
AB
, and Retail Displa
y are divisions of Eagle Group
.
©
2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www
.eaglegrp.com
• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
Before assembly:
Remove all protective plastic covering from the stainless steel parts prior to installation of accessories.
Step 1 - Install drawer/shelf supports.
• Install drawer/shelf supports by
engaging rear mounting boss into
slot at rear of cart and engage front
mounting boss into keyhole slot at
front of cart.
• Install either wire framed or
sheet metal shelf onto top lip of
drawer/shelf support and slide
shelf toward rear wall of cart.
• Allow shelf stop to drop down
and align with center channel
of support.
CAUTION
INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING CARRIER FOR ANY DAMAGE.
SAVE YOUR BOX AND ALL PACKING MATERIALS.
YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.
rear
mounting
boss
front
mounting
boss
rear slot
keyhole
slot
drawer/shelf
support
drawer/shelf
suppor
t
lower lip
PART #327536
shelf
stop
shelf
top lip of
drawer/shelf
support
dr
awer/shelf
suppor
t
center
channel
Step 3 - Install drawers.
Assembly is complete.
See reverse side for information on casters.
• Install drawer
onto lower lip of
drawer/shelf
supports, and slide
drawer toward rear
wall of cart.
Step 2 - Install shelves.
Eagle F
oodser
vice Equipment, Eagle MHC
, SpecF
AB, and Retail Display are divisions of Eagle Group. ©2005 by the Eagle Group
• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com
• Phone: 302/653-3000 • (Foodser
vice) 800/441-8440 • (MHC/Retail) 800/637-5100
• Fax: 302/653-2065 or 302/653-3036
ASSEMBLY INSTRUCTIONS
Case Cart – Herman Miller
Caster Maintenance
• Establish a regular schedule to inspect all cart casters after cart washings and lubricate casters, as needed.
• Caster lubrication may be required after each cart washing.
• Stainless steel casters will require less maintenance in frequent cart washings.
Caster Lubrication
•
Lubricate cart casters with special high temperature, water resistant lubricants only
.
• Use standard lubrication practices and tools.
breaking
lever
locked
position
unloc
ked
position
break release pad
caster wheel
locking arm
locked
position
unlocked position
(top view of caster)
Special Caster Information
Note: Chrome and stainless steel casters are equipped
with grease seals and lubricating zerk fittings to
improve operation and increase life of caster.
To operate casters with brakes:
Press braking lever down to lock caster. Press brake pad down
to unlock caster.
To operate swivel lock casters:
Rotate locking arm clockwise 90˚ to align caster wheel to lock
caster swivel.
  • Page 1 1
  • Page 2 2

Eagle Group Herman Miller Installation guide

Eagle Group
Brand
Eagle Group
Model
Herman Miller
Category
Multimedia carts & stands
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents