Installation Instruction
English ------------------------------ 01-05
Deutsch ------------------------------ 06-10
Français ------------------------------ 11-15
Español ------------------------------ 16-20
Italiano ------------------------------ 21-25
V2.0
PSTVS05
Thank you for choosing our product! We strive to provide the best quality
and services for our customers. Would you kindly share your experience
on Amazon if you are satisfied? Should you have any issues, please don't
hesitate to contact us.
Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)
Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)
Supplied Parts List
M8x40mm
Concrete Anchor
Z (x1)
M6x45mm
Lag Bolt
Y (x1)
Lag Bolt Washer
X (x1)
Tempered Glass
(x1)
M4x12 Bolt
G (x4)
M8x20 Bolt
L (x4)
20mm M6/M8 Spacer
C (x4)
Rubber Pad
(x4)
M6x10 Bolt
(x4)
Secuity Wire
(x1)
Support Pillar
(x1)
M4x30 Bolt
H (x4)
M8x35 Bolt
M (x4)
M4 Washer
D (x4)
Allen Key
(x1)
Metal Washer
(x4)
M6x20 Bolt
J (x4)
M8x45 Bolt
N (x4)
M6 Washer
E (x4)
M4 Spacer
A (x4)
TV Plate
(x1)
M8x22 Bolt
(x3)
Plastic Socket
(x1)
M6x35 Bolt
K (x4)
M8 Washer
F (x4)
5mm M6/M8 Spacer
B (x8)
Monitor Bracket
(x2)
Wire Clip
(x2)
Metal Pad
(x1)
1
Note: The mounting components and hardware supplied in this package are not designed for
installations to walls with steel studs or to cinder block walls. If the hardware you need for your
installation is not included, please consult your local hardware store for proper mounting hard-
ware for the application.
If you don't understand these directions or have any doubts about the safety of the
installation.
Install and operate this device with care. Please read this instruction before beginning the
installation, and carefully follow all instructions contained herein. Use proper safety equipment
during installation.
Do not use this product for any purpose or in any conguration not explicitly specied in this
instruction. We hereby disclaim any and all liability for injury or damage arising from incorrect
assembly, incorrect mounting, or incorrect use of this product.
If you are uncertain about the nature of your wall, consult a qualied installation contractor.
Please call a qualied installation contractor for help if you:
IMPORTANT SAFETY INFORMATION
2
Connecting the Support Pillar to Tempered Glass
Step 1
Connecting the TV Plate to Support Pillar
Step 2
Tempered Glass
Rubber Foot
Support Pillar
Plastic Socket
M8x22 Bolt
Metal Pad
TV Plate
Allen Key
Allen Key
M6x10 Bolt
Metal Washer
Wire Clip
1.1
1.2
2.1
2.2
Height
Adjustable
3
Mounting your TV to the Brackets
Step 3
Attaching TV to TV Plate and Managing the Wires
Step 4
4.1 4.2
Safety Bolt
3.1 G/H/J/K/L/M/N
3.2 A/B/C
(Optional)
3.3
A,B,C
(if necessary)
G to N
D to F
Monitor Bracket
1
2
4
5.1 5.2
5.3 5.4
1.77in(45mm)
0.15in(3.8mm)
Wall
Attaching the Security Steel Wire to the TV
Step 5
If your TV is located nearby the wall as the 5.1, then a steel wire can be attached for additional security.
Using screw (G to N) through washer (D to F), the end of security wire, bracket hole and TV VESA hole in
sequence. By tightening the screw, the security wire is attached to the TV.
Attaching the other end of the security wire to the wall. Installation on dierent types of walls shown in
5.3, 5.4 and 5.5.
Wood Stud Wall Concrete & Brick Wall
Y
X
Y
X
Z
Secuity Wire
Secuity Wire
1.57in(40mm)
1.77in(45mm)
0.31in(8mm)
G to N
D to F
Security wire
5
5.5
Now your TV is standing steadfastly and securely
Step 5
Thank you for choosing our products.
Now enjoy your TV with PERLESMITH TV stand!
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
