PERLESMITH PSFS01 Installation guide

Brand: PERLESMITH

Model: PSFS01

Type: Installation guide

Thank you for choosing our product! We strive to provide the best

quality and services for our customers. Would you kindly share your

experience on Amazon if you are satisﬁed? Should you have any

issues, please don't hesitate to contact us.

Telephone：800-5566-806 Mon-Fri 10am - 6pm (PST) (USA) (CAN)

Email：[email protected] (US/CA/DE/UK/FR/IT/ES/JP/AU)

PSFS01

Installation Instruction

V1.0

Supplied Parts List

Wire Clip

TV Plate

(x1)

Support Pillar Tempered Glass Monitor Bracket

Plastic Socket

(x1)

3 4

(x2) (x1)

M8x35 Bolt M6x60 Bolt

(x3)

(x4)

M8X22X2

(x3)

M8X22X2

(x3)

Metal Pad

Safety Lock

Rubber Pad

(x2)

(x6)

(x2)

(x1)

(x4)

M6x16 Bolt M6x30 Bolt M8x16 Bolt

(x4) (x4)

(x4)

TV4TV2

M6x50 Bolt

(x4)

TV3TV1

M8x45 Bolt

(x4)

TV5

M8x65 Bolt

(x4)

TV6

SP1 SP2

(x8)

TV7

(x8)

TV8

Spacer with 3 holes

(x4)

TV9

Allen Key Allen Key

Steel Washer

Plastic Washer

WARNING! SEVERE PERSONAL INJURY AND PROPERTY DAMAGE

CAN RESULT FROM IMPROPER INSTALLATION OR ASSEMBLY.

READ FOLLOWING WARNINGS BEFORE BEGINNING.

•If you do not understand the instructions or have any concerns or questions,

please contact customer service at [email protected]

•Do not install or assemble if the product or hardware is damaged or missing.

•Not all parts and hardware included will be used. lf you require replacement

parts, contact customer service at [email protected]

•This product may contain moving parts. Use with caution.

•Please check www.perlesmith.com for more products and company

information.

IMPORTANT SAFETY INFORMATION

Plastic Socket

Tempered Glass

(Painting Side)

Rubber Pad

Allen Key

Connecting the Support Pillar to Tempered Glass

Step 1

Connecting the TV Plate to Support Pillar

Step 2

Support Pillar

1.1

1.2

TV Plate1

M6x60 Bolt

Metal PadE

Allen Key

two choices for height

adjustment for the wall plate

Step 3

Wire Clip

Measure VESA and Check TV screws

Check TV screws

When attaching brackets to the ﬂat

screen, be careful not to over tighten

screws and be sure that screws do

not bottom out in the mounting

holes.

Too Short

Too Long

Correct

Hand thread screws into the threaded inserts

on the back of your TV to determine which

screw diameter (M6, or M8) to use.

Measure the distance between

the holes located at the back of

your TV (these measures may

form the shape of a square, or a

rectan-gle) and check that these

taken measures are within the

VESA(*) range for this wall

mount.(*) VESA: International

standard established by the TV

manufacturers used to determine

if LCD/LED TVs are compatible

with wall mounts.

Attaching TV to TV Plate and Managing the Wires

Step 5

Wire Clip

Safety Lock

FLAT BACK TV

(UNIVERSAL MONITOR PLATE)

screwdriver(Not included)

ROUND BACK TV

(UNIVERSAL MONITOR PLATE)

First, make sure the diameter of the bolt(TV1-6) ﬁts your TV. Then, please see the diagram above. You will need

to thread the bolt into the TV using the correct washer (TV9) and spacer (TV7 or TV8) if necessary with a

screwdriver(Not included). Please make sure the monitor brackets(4) are vertically centered and level with each

other.

TV9

Step 4

Mounting the Monitor Bracket to a TV

TV1,4

TV9

TV7,8

TV2,3,5,6

First choice Second choice Third choice

Height adjustable vertical bracket(4)

ﬁrst choice

second choice

third choice

If you ﬁnd your TV set is too close to the base, please take oﬀ the TV from the stand.

Then, change to the second choice or third choice to allow more space between TV and

the tempered glass base (3).

Adusting the Height of the TV

Step 6

Swivel Adustment

PERLESMITH PSFS01 Installation guide

PERLESMITH PSFS01 Installation guide

PERLESMITH PSFS01 Installation guide

Related papers

Other documents