Newport Brass 2940-5623/03N Installation guide

Brand: Newport Brass

Model: 2940-5623/03N

Category: Sanitary ware

Type: Installation guide

INSTALLATION INSTRUCTIONS

COLD WATER DISPENSER

Model No’s:

106C, 107C, 108C, 1030-5623,

2470-5623, 1200-5623, 2940-5623, 2500-5623,

3170-5623, 3200-5623, 3210-5623,

3160-5623, 3180-5623, 3190-5623

Congratulations on the purchase

of your Brasstech product,

an excellent choice, that will give you

years of quality service and enhance

the look and style of your home.

106C

Recommended Installation by a Professional Plumbing Contractor

Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the

use of clear silicone sealing materials. Recommended deck thru hole Ø 1.25" to Ø1.38

INSTALLING FAUCET ON SINK (See Fig 1)

· Place the faucet inlet and mounting stud through escutcheon, o-ring, and mounting surface hole.

· Slide gasket and mounting cresent over mounting stud on underside of mounting surface and secure into place

with mounting nut.

Figure 1

Mounting nut

Mounting

Crescent

Rubber gasket

O-ring

Escutcheon

Mounting surface

& hole

NWP-106C Rev B

ATTACHING WATER SUPPLY CONNECTION (See Fig 2)

· Slide the 1/4” OD supply tube (not included) through compression nut and compression

sleeve. Place insert into end of tube.

· Insert the end of tube into faucet inlet and thread compression nut onto the end of inlet.

3. TEST INSTALLED FAUCET

· With handle in OFF position, turn on water supplies and check all connections for leaks.

Figure 2

Connect to

water supply

(not included)

1/4” OD Tubing

(not included)

Compression

nut

Compression

sleeve

Insert

Faucet inlet

2001 CARNEGIE AVE, SANTA ANA CA 92705

(949) 417-5207

WWW.NEWPORTBRASS.COM

NWP-106C Rev B

EN-3411

09/27/17

1
2
3

Newport Brass 2940-5623/03N Installation guide

Brand: Newport Brass

Model: 2940-5623/03N

Category: Sanitary ware

Type: Installation guide

Related papers

Other documents