Newport Brass 2043/26 Installation guide

Brand
Newport Brass
Model
2043/26
Type
Installation guide

This manual is also suitable for

SINGLE HOLE FAUCET
INSTALLATION INSTRUCTIONS
Model No: 2043
2001 CARNEGIE AVE, SANTA ANA CA 92705
(949) 417-5207
WWW.NEWPORTBRASS.COM
S E C A N T
NWP-2043
Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the war-
ranty. We recommend the use of clear silicone sealing materials. Recommended
deck thru hole Ø 1-3/8” to 1-1/2”.
EN-3880
REV B
1. Insert hoses through deck hole one at a time, and secure spout into place with
MOUNTING STUD, MOUNTING CRESCENT and MOUNTING NUT. See Figure
1.
2. Attach hot/cold spout supply hoses to valves in the wall. See Figure 2.
3.
Drain assembly not included with 1203-1. Remove FLANGE, RUBBER WASHER,
STEEL WASHER, and discard drain CAP COVER from drain assembly. Place RUBBER
WASHER into FLANGE. Then, place FLANGE through the sink hole (Clear silicone
may be used in place of RUBBER WASHER). From underside of sink, install CONE
WASHER, STEEL WASHER, and LOCK NUT into FLANGE. Thread LOCK NUT
firmly. Thread TAILPIPE to FLANGE assembly and assemble TAILPIPE to existing P-
Trap. See Figure 3.
4.
Turn on water supply, and flush system until water is clear. Check for leaks and make
any final adjustments required.
Figure 1
Figure 2
(949)417-5207
Santa Ana, CA. 92705
www.newportbrass.com
3/8” COMPRESSION
OUTLET
9/16-24 UNEF
(FOR 3/8” COMPRESSION
OUTLET )
NWP-2043
EN-3880
REV B
05/30/2019
Figure 3
Mounting Stud
Mounting
Nut
Mounting
Crescent
  • Page 1 1
  • Page 2 2
  • Page 3 3

Newport Brass 2043/26 Installation guide

Brand
Newport Brass
Model
2043/26
Type
Installation guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents