2. Home
  3. Domestic appliances
  4. Sanitary ware
  5. Newport Brass
  6. 1030-5623/03N
1030-5623/03N

Newport Brass 1030-5623/03N Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Newport Brass 1030-5623/03N Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
INSTALLATION INSTRUCTIONS
COLD WATER DISPENSER
Model No’s:
106C, 107C, 108C, 1030-5623,
2470-5623, 1200-5623, 2940-5623, 2500-5623,
3170-5623, 3200-5623, 3210-5623,
3160-5623, 3180-5623, 3190-5623
Congratulations on the purchase
of your Brasstech product,
an excellent choice, that will give you
years of quality service and enhance
the look and style of your home.
106C
Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recommend the
use of clear silicone sealing materials. Recommended deck thru hole Ø 1.25" to Ø1.38
INSTALLING FAUCET ON SINK (See Fig 1)
· Place the faucet inlet and mounting stud through escutcheon, o-ring, and mounting surface hole.
· Slide gasket and mounting cresent over mounting stud on underside of mounting surface and secure into place
with mounting nut.
Figure 1
Mounting nut
Mounting
Crescent
Rubber gasket
O-ring
Escutcheon
Mounting surface
& hole
NWP-106C Rev B
ATTACHING WATER SUPPLY CONNECTION (See Fig 2)
· Slide the 1/4” OD supply tube (not included) through compression nut and compression
sleeve. Place insert into end of tube.
· Insert the end of tube into faucet inlet and thread compression nut onto the end of inlet.
3. TEST INSTALLED FAUCET
· With handle in OFF position, turn on water supplies and check all connections for leaks.
Figure 2
Connect to
water supply
(not included)
1/4” OD Tubing
(not included)
Compression
nut
Compression
sleeve
Insert
Faucet inlet
2001 CARNEGIE AVE, SANTA ANA CA 92705
(949) 417-5207
WWW.NEWPORTBRASS.COM
NWP-106C Rev B
EN-3411
09/27/17
/