2. CODELOCKS
  3. KL10 KitLock

CODELOCKS KL10 KitLock, KitLock KL1O Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the CODELOCKS KL10 KitLock Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SPECIAL NOTES
KL1O
Installation and Operating Instructions
Please read carefully:
• Before installing the lock, familiarise yourself with the installation and operating instructions.
• The factory preset combination is 0-0-0-0.
• YourKitLockissuppliedreadytottodoorsupto19mm(
3
/
4
”) thick.
FITTING INSTRUCTIONS
TheKitLockcanbettedtocabinets, cupboards and lockers etc. as a direct replacement for existing cam locks.
Itcanalsobettedeasilytocupboardsandcabinetsthatdonothaveanexistinglockingdevice.
INSTALLATION GUIDE
Replace existing cam lock with KitLock
A
Step1 Removeexistingcamlock.
Step 2 Fit the KitLock to the door, passing the
spindle through the existing hole.
Step 3 Now secure the lock by threading the hex nut
onto the spindle.
Step 4 Fit cam and secure with screw.
Step 5 Now check the operation of the lock using the
factory preset combination 0-0-0-0.
Step 6 If the lock is functioning correctly, change the
codeusingtheinstructionsoverleaf.
New Installation
B
Step1 Markapositionatasuitabledistancefrom
the door edge, ensuring enough clearance
for the cam to work.
Step 2 Using the ‘Typical Door Prep.’ dimensions
(seeoverleaf),drillaholetosuit..
Step 3 Continue installation from step 2 to 6, left.
KitLock
Hexnutx1
1
2
3
4
Straightcamx1
Screwx1
1.
2.
3.
4.
Fixing Pack A Default Supply
MetalClipx1
Screws x 2
1
2
3
4
Washerx1
CrankCamx1
Fixing Pack B Optional Additional Fixings
1.
2.
3.
4.
N.B. Optional Fixing Pack B(above)mayberequired.
CODELOCKS UK
HEADQUARTERS
Tel:+44(0)1635239645
Fax:+44(0)1635239644
[email protected]
www.codelocks.com
Helpline,service&spares
Freephone:0800393405
CODELOCKS INC US
Tel:+17149792900
Fax:+17149792902
[email protected]
www.codelocks.us
Helpline,service&spares
Tollfree:1.877.codelock
CODELOCKS
(Australia) PTY LTD
Tel:+61298821009
Fax:+61298826030
[email protected]
www.codelocks.com.au
Helpline,service&spares
Tollfree:1800052131
CHANGING THE CODE
FINDING THE CODE
DIMENSIONS
With the indicator in the open position, turn the dials
to the factory preset combination 0-0-0-0.
Note:Ifyouhavealreadychangedthecode,use
your current combination for this step.
DepresstheResetButtonfullyandhold,turnthe
dials to your desired combination.
Note:DonotletgooftheResetButtonwhilesetting
your combination.
ReleasetheResetButtonaftercheckingyour
combination is correct.
Note: The outer casing will turn freely between the
open and locked position until the combination has
been scrambled.
1
2
3
ResetButton
Open Position
Dials
Guide Line
Locked Position
InserttheMasterKey
when the indicator is in
the locked position.
1
Turn the key
clockwise90
degrees.
2
Gently rotate each dial
upwards until it stops.
This is your code.
3
TurntheMasterKey
anticlockwise90
degreesandremove.
4
58mm
(2
5
/
16
”)
MasterKey
KL10
62mm(2
1
/
2
”)
25mm
(1
”)
24mm
(
15
/
16
”)
18mm
(
11
/
16
”)
max.
52mm(2
1
/
16
”)
IOI-KL10-v2-0419
HOW TO USE YOUR LOCK
Onceyouhavechosenandsetyour
combination, turn the outer casing so the
indicator is in the locked position.
Makeanoteofyourchosencombinationand
scramble the dials. The lock is now locked.
To reopen, rotate the dials to your chosen
combination and turn the outer casing so the
indicator is in the open position.
Note: Your chosen combination will continue to
operate the lock until it is changed.
1
2
3
Typical Door Prep.
16mm
(
5
/
8
”)
min.
19mm(
3
/
4
”)
min.
Indicator
Note ThisfunctionrequirestheMasterKey(soldseparately).
/