KWorld KW-SA260RX User manual

Brand: KWorld

Model: KW-SA260RX

Type: User manual

This manual is also suitable for

PlusTV MediaSender Wireless User’s Manual

- 1 -

About This Guide

This User’s Manual is for specific product, and all its contents are processed with

due care but are not ensured fully correct.

We assume no responsibility for any loss arising from use of this manual.

The right to interpret all contents of this User’s Guide belongs to the company

The manual is subject to change without notice.

This User’s Manual is not authorized to any party and no reproduction or copy,

in part or whole, of the manual in any way is permitted.

KWorld Website: www.kworld.com.tw

KWorld Computer Co., Ltd

- 2 -

Table of Contents

About This Guide....................................................................................................... 1

Table of Contents .................................................................................................... 2

Instruction .................................................................................................................. 3

1.1 Functions and features ........................................................................ 3

1.2 Product Appilcation .............................................................................. 4

1.3 Packaged contents .............................................................................. 4

1.4 Technical specifications ....................................................................... 4

Hardware and Installation Instruction ........................................................................ 5

2.1 Emitter (KW-SA260TX) Keys and Back Panel Instructions ................. 5

2.2 Receiver (KW-SA260RX) Keys and Back Panel Instructions .............. 5

2.3 Position for Emitter (KW-SA260TX) .................................................... 6

2.4 Position for Transceiver (KW-SA260RX) ............................................. 7

2.5 Position for antenna ............................................................................. 8

Operation Manual ...................................................................................................... 9

3.1 Signal channel selection ...................................................................... 9

3.2 Power switch ....................................................................................... 9

3.3 Channel Selection ............................................................................. 10

3.4 Remote Return Function Operation .................................................... 11

FAQ and Troubleshooting Methods ........................................................................ 12

Thank you for buying KWorld’s PLUSTV MediaSender Wireless

For better use of the product, please read this User’s Manual carefully before use.

PlusTV MediaSender Wireless User’s Manual

- 3 -

Instruction

KW-SA260 wireless A/V transceiver consists of emitter (KW-SA260TX) and receiver

(KW-SA260RX). It adopts advanced 2.4GHz wireless transmission technology, with

strong anti-interference and mobility. When used in conjunction with set-top box,

DVD, VCD and etc, it can be installed easily, subject to no space impedance and

without any use of wire connection. It can make audio and video transmitting easily

available in every room at home, letting you enjoy HIFI audio and video freely at

every corner at home.

1.1 Functions and features

z Use of 2.4GHz ISM channel

z Four set of transmitting channel can be selected for use, improving feasibility and

reliability

z Emitter and receiver are used in match within the same channel, also one-to-many,

and many-to-many are available

z Compatible with AV output equipments such as video recorder, video camera,

digital camera,

z digital set-top box

z 433MHz infrared remote returning transmission, fully compatible with remote

control as

z DVD/VCD/digital et-top box

z Strong infrared emission, without need of installing infrared emission extension

cord

z Received image is clear and stable, bright color, articulate sound without noises

z Support NTSC/PAL system video and stereophonic audio transmission

z Complete hardware design, with no need of installing software, Plug and Play,

easy and convenient

KWorld Computer Co., Ltd

- 4 -

1.2 Product Appilcation

A/V to A/V wireless transmission, can be used when many televisions share a

DVD/VCD or digital television set-top box and etc. Video conference system in large

conference room, and multimedia room teaching. External connected monitoring

camera head, real-time on-spot image monitoring, can be used in security systems.

Building and industry monitoring system, long-distance manual monitoring children

and patient in patient wards. Audio and video transmitting places where construction

is difficult or cost is high.

1.3 Packaged contents

KW-SA260TX 1 PC

KW-SA260RX 1 PC

Power adapter (DV5V/1000mA) 2 PC

AV cable 2 PC

MMI AV cable 1 PC

User Manual 1 PC

1.4 Technical specifications

Power input: DC 5V--200mA

Video input: RCA (NTSC/ PAL)

Audio input (RCA)

Video output: RCA (NTSC/PAL)

Audio output RCA

PlusTV MediaSender Wireless User’s Manual

Hardware and Installation Instruction

2.1 Emitter (KW-SA260TX) Keys and Back Panel Instructions

2.2 Receiver (KW-SA260RX) Keys and Back Panel Instructions

- 5 -

KWorld Computer Co., Ltd

2.3 Position for Emitter (KW-SA260TX)

In order to ensure normal transmission of infrared signal, please place emitter

(KW-SA260TX) following below two methods.

c Use infrared emitting equipment at the front of emitter:

place emitter on V/A equipments, and extend infrared emitting window 2-3cm or the

DVD Player & KW-SA260TX front infrared face to face, pointing to infrared receiving

window of V/A equipments.

*** extend infrared emitting window 2-3cm ***

*** DVD Player & KW-SA260TX front infrared face to

face ***

Cozy tips:

There are usually words like "infrared remote" or "IR" on the infrared remote receiving

window of set-top box (STB) or DVD, please point emitter's infrared emitting window to it.

There are infrared emitting windows at the front and back of KW-SA260TX, see picture:

- 6 -

PlusTV MediaSender Wireless User’s Manual

d Use infrared emitting equipment at the back of emitter:

place emitter in front of V/A equipments, and point infrared emitting window on the

back of the emitter to infrared receiving window of V/A equipments. And ensure

there are no barriers between them.

Cozy tips:

To ensure optimal use effect, this positioning method is suggested when condition allows.

2.4 Position for Transceiver (KW-SA260RX)

Please place transceiver (KW-SA260RX) beside the TV set, turn it on and connect

AV wire according to relative color (yellow, white and red).

- 7 -

KWorld Computer Co., Ltd

2.5 Position for antenna

Please pay attention to the position of 433MHz antenna, ensuring there is no

barriers around the antenna. Especially pay attention to the metal, which will greatly

influence transmission of infrared returning signal. Please straighten antenna and

locate it according to following ways.

Cozy tips:

The 2.4GHz antenna and 433MHz antenna of transceiver and emitter shall be correctly

placed, or it is easy to inference normal transmission of signal.

- 8 -

PlusTV MediaSender Wireless User’s Manual

Operation Manual

3.1 Signal channel selection

AV1/AV2 can be switched freely by pressing information source button to freely

switch (see hardware introduction for AV1/AV2 input port description), and the signal

can be normally transmitted only when transceivers are in the same channel. When

you switch AV1/AV2 at transceiver (KW-SA260RX), emitter (KW-SA260TX) will

automatically switch signal channel according to your operation.

The situation of panel indicator light is as follows:

er switch

Press

3.2 Pow

to connect or cut off power of 2.4GHz emitter or transceiver, switching its

operation mode of transmission or non-transmission signal. The panel indicator light

of switch flash as follows:

- 9 -

KWorld Computer Co., Ltd

- 10 -

KWorld Computer Co., Ltd

- 10 -

3.3 Channel Selection

Four 2.4GHz transmission channels can be switched freely by pushing on channel

switch channel button. But only when the transceiver is in the same channel can

video signals be transmitted normally. Panel indicator light for each channel

selection mode goes like following:

Cozy tips:

When wireless local area network (LAN) (802.11 or equipment named as Wifi), please select

Channel one or four, which can avoid signal interference by wireless local area network

(

LAN

)

PlusTV MediaSender Wireless User’s Manual

3.4 Remote Return Function Operation

nt can

A260 receiver (KW-SA260RX), without the

KW-SA260 wireless V/A transceiver have no specified remote, but have remote

return function. When emitting source is video program such as set-top box (STB)

DVD, video camera with remote function, remoter incorporated in the equipme

be used directly on the side of KW-S

need of operating on the signal source end (front of V/A equipment).

Step one:

Refer to connecting installation picture, connect emitter (KW-SA260TX), and confirm

there are no barriers between emitter's infrared window and infrared receiving

indow of program source.

Step two:

When enjoying programs from receiver (KW-SA260RX), point remoter to remote

receiving window of the receiver, then can remote control V/A equipments on the

side of emitting end, which is easy and convenient for operation

Cozy tips:

Please pull 433 MHz receiving and emitting antenna of emitter and receiver as straight as

possible, and away from audio and video connecting lines, to ensure no interference to

signal transmission. In case of infrared remote malfunction, please check antenna's position

on the condition that there is no

ositionin

roblem with the transceiver.

- 11 -

KWorld Computer Co., Ltd

- 12 -

FAQ and Troubleshooting Methods

3. Adjust transceiver's position (refer to hardware and installation

struction).

2. Please adjust transceiver's antenna and position (refer to position for

ntenna).

nd installation

instruction)

z Indicator does not light and there are no image

1. Check whether power of transceiver is connected.

2. Change receiver's transmitting channel (refer to operation

manual/Channel switch).

z Remote returning malfunction

1. Check whether emitter's connecting installation is correct (refer to

hardware and installation instruction).

z Image is interfered

1. Change receiver's transmitting channel (refer to Channel selection).

2. Please adjust transceiver's position (refer to hardware a

KWorld KW-SA260RX User manual

Brand: KWorld

Model: KW-SA260RX

Type: User manual

This manual is also suitable for

Download PDF

report

KWorld KW-SA260RX User manual

This manual is also suitable for

KWorld KW-SA260RX User manual

Related papers

Other documents