Cozy Products CLS Operating instructions

Brand
Cozy Products
Model
CLS
Type
Operating instructions

how to use the stands
Cozy Legs can be mounted in two ways, depending on what is most convenient.
If you will be mounting Cozy Legs to a wall or to the modesty panel of your desk, then use the adhesive as described in
the main instruction sheet. Simply remove and discard the two stands (by gently pulling them off of the Cozy Legs
panel (the panel has been pre-inserted into the two stands for easy shipping).
If you will be using it in any other area, simply turn the movable base of the stands perpendicular to the U-shaped
bracket holding the panel. Then, move each stand a bit further apart from the other for better stability. If you wish to
tighten the screw, use a Phillips-head screwdriver.
300 N. Elizabeth St., Chicago, IL 60607 • tel 312 226-2473 • www.safeheaters.com

how to use the stands
Cozy Legs can be mounted in two ways, depending on what is most convenient.
If you will be mounting Cozy Legs to a wall or to the modesty panel of your desk, then use the adhesive as described in
the main instruction sheet. Simply remove and discard the two stands (by gently pulling them off of the Cozy Legs
panel (the panel has been pre-inserted into the two stands for easy shipping).
If you will be using it in any other area, simply turn the movable base of the stands perpendicular to the U-shaped
bracket holding the panel. Then, move each stand a bit further apart from the other for better stability. If you wish to
tighten the screw, use a Phillips-head screwdriver.
300 N. Elizabeth St., Chicago, IL 60607 • tel 312 226-2473 • www.safeheaters.com

how to use the stands
Cozy Legs can be mounted in two ways, depending on what is most convenient.
If you will be mounting Cozy Legs to a wall or to the modesty panel of your desk, then use the adhesive as described in
the main instruction sheet. Simply remove and discard the two stands (by gently pulling them off of the Cozy Legs
panel (the panel has been pre-inserted into the two stands for easy shipping).
If you will be using it in any other area, simply turn the movable base of the stands perpendicular to the U-shaped
bracket holding the panel. Then, move each stand a bit further apart from the other for better stability. If you wish to
tighten the screw, use a Phillips-head screwdriver.
300 N. Elizabeth St., Chicago, IL 60607 • tel 312 226-2473 • www.safeheaters.com
  • Page 1 1

Cozy Products CLS Operating instructions

Brand
Cozy Products
Model
CLS
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents