Addonics Technologies ADU3ESA User manual

Brand: Addonics Technologies

Model: ADU3ESA

Category: Interface cards/adapters

Type: User manual

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v3.1.11

T E C H N O L O G I E S

www.addonics.com

User Guide

USB 3.0 to eSATAp Adapter

(ADU3ESA)

Type of USB Port:

USB 3.0 - Green Power LED

USB 2.0 - Orange Power LED

Drive Activity LED:

Blinking red color if there is drive activity on the eSATA storage device connected to

the USB3.0 to eSATAp adapter.

Note: The USB3.0 to eSATAp adapter is compatible to hardware port multipliers

where the hard drives are configured as a single raid volume. The current firmware of

the USB3.0 to eSATAp adapter also supports individual hard drive mode when

connected to a JMicron JMB393 port multiplier.

In this mode, the system sees a single USB device with multiple drive letters.

Removing any of the storage units (or drive letters) associated with the single USB

device forces the USB to detach and reenumerate with the reduced number of drives.

If you remove or disconnect one of the drives connected on the JMicron JMB393 port

multiplier, this will stop activity on all the drives which would mean if you are in the

process of transferring data on any drive, it will stop.

www.addonics.com

Phone: 408-573-8580

Fax: 408-573-8588

Email: http://www.addonics.com/sales/query/

CONTACT US

Drive Activity LED

Power LED

eSATAp (Hybrid eSATA) port for

connecting eSATA or eSATAp

storage device

To any USB3.0

or 2.0 port

To Computer/System

USB

Extension

Cable

1
2

Addonics Technologies ADU3ESA User manual

Brand: Addonics Technologies

Model: ADU3ESA

Category: Interface cards/adapters

Type: User manual

Related papers

Other documents