Addonics AD2U3EXC34 User manual

Addonics
Brand
Addonics
Model
AD2U3EXC34
Category
Interface cards/adapters
Type
User manual
ADDONICS TECHNOLOGIES
Model: AD2U3EXC34
Software Installation:
Adding the USB3.0 ExpressCard to an existing Windows system
Note: Install NEC driver first by running the NECEL-USB3.0-Host-Driver-10170-
setup from the CD that came with your package before installing the host controller.
A. From the CD start-up menu select SATA Adapters. Select Model
#AD2U3EXC34.
B. Install the NECEL-USB3.0-Host-Driver-10170-setup
C. After driver installation, it is recommended to shutdown your system.
1. Turn computer ON. Insert card to ExpressCard slot. When Windows boots up,
the “Found New Hardware Wizard” pops on the screen and the PCI Device is
identified.
2. Wait while the wizard installs the software…
3. After driver installation, it is recommended to restart your system.
Confirming USB3.0 Driver Installation
1. Right click the My Computer icon and select Manage.
2. Click Device Manager in the Menu Tree.
3. Click the “+” sign in front of Universal Serial Bus Controllers. You should see
NEC Electronics USB3.0 Host Controller
NEC Electronics USB3.0 Root Hub.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone: 408 453-6212
Email: http://www.addonics.com/support/query/
ADDONICS TECHNOLOGIES
Model: AD2U3EXC34
Software Installation:
Adding the USB3.0 ExpressCard to an existing Windows system
Note: Install NEC driver first by running the NECEL-USB3.0-Host-Driver-10170-
setup from the CD that came with your package before installing the host controller.
D. From the CD start-up menu select SATA Adapters. Select Model
#AD2U3EXC34.
E. Install the NECEL-USB3.0-Host-Driver-10170-setup
F. After driver installation, it is recommended to shutdown your system.
1. Turn computer ON. Insert card to ExpressCard slot. When Windows boots up,
the “Found New Hardware Wizard” pops on the screen and the PCI Device is
identified.
2. Wait while the wizard installs the software…
3. After driver installation, it is recommended to restart your system.
Confirming USB3.0 Driver Installation
1. Right click the My Computer icon and select Manage.
2. Click Device Manager in the Menu Tree.
3. Click the “+” sign in front of Universal Serial Bus Controllers. You should see
NEC Electronics USB3.0 Host Controller
NEC Electronics USB3.0 Root Hub.
TECHNICAL SUPPORT (8:30 am to 6:00 pm PST)
Phone: 408 453-6212
Email: http://www.addonics.com/support/query/
ExpressCard 34 form factor
(34/54 slot bracket included)
Two USB 3.0 ports
Built-in 5V DC jack connector
required for certain USB bus-
powered devices
Slot bracket to
fit into 54mm
slot
ExpressCard 34 form factor
(34/54 slot bracket included)
Two USB 3.0 ports
Built-in 5V DC jack connector
required for certain USB bus-
powered devices
Slot bracket to
fit into 54mm
slot
  • Page 1 1

Addonics AD2U3EXC34 User manual

Addonics
Brand
Addonics
Model
AD2U3EXC34
Category
Interface cards/adapters
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents