Exibel DAB X50 User manual

Category
Alarm clocks
Type
User manual
DAB+/FM-radio med Bluetooth
DAB+/UKW-Radio mit Bluetooth
Ver. 20170822
English 3
Svenska 15
Norsk 27
Deutsch 39
Bluetooth DAB+/FM Radio
Art.no. Model
38-8182 DAB X50
2
3
English
Bluetooth DAB+/FM Radio
Art.no 38-8182 Model DAB X50
Please read theentire instruction manual before using theproduct and then save
it for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technicaldata. In theevent of technical problems or other
queries, please contact our Customer Services (see address details on theback).
Safety
Theproduct should not be taken apart or modified. Certain unshielded
components inside thecasing carry dangerous voltages. Contact with these can
lead to fire or anelectricshock.
Theproduct is intended for indoor useonly.
Never subject theproduct to high temperature, dust, heavy vibration, impacts,
humidity or moisture.
Do not place theproduct where there is arisk of it falling into water or other liquid.
Donot place any objects containing liquid on theproduct,e.g. flower vases or drinks.
Do not cover theproduct. Adequate ventilation with adistance of at least
10cm between theproduct and thesurrounding area is necessary to prevent
theappliance from becoming toowarm.
Disconnect theproduct from thepower supply by unplugging it from thewall
socket. Makesure that thewall socket and plug/mains adaptor are easily
accessible.
Theon/off button on thefront of theradio does not disconnect theproduct from
theelectricitymains.
Protect your hearing. Listening on high volume for prolonged periods can lead to
permanent hearingloss.
Repairs and service should only be performed by qualified tradesmen, and only
with original spareparts.
4
English
10
11
12
13
14
15
16
1 6
2 7
3
4 8
5 9
Product description
1. [ MODE ] Select audio source: FMradio, DAB
radio, Bluetooth or Auxiliary Input.
2. [ ] On/off
3. [ VOLUME/SELECT ll ] Volume, search for
radio channel, menu navigation, confirm,
Bluetooth, play/pause.
4. [ MENU/INFO ] Hold in for menu, quick-press for
info and to back out of thecurrent menu selection.
5. [ l◄◄ ] Search for radio channel on lower
frequency, menu navigation, change track on
aBluetooth-connected device.
6. [ PRESET ] Save radio channels as presets,
select preset radio channel.
7. [ ALARM ] Set-up for alarm 1 and 2
8. [ DIMMER/SNOOZE ] Set-up of dimmer function
and snooze function.
9. [ ►►l ] Search for radio channel on higher
frequency, menu navigation, change track on
aBluetooth-connected device.
10. Display
11. Loudspeaker
12. Aerial
13. 3.5 mm headphone socket
14. 3.5mm AUX IN socket for external audio sources
15. USB port for charging external devices
16. Mains adaptor socket
5
English
Operating instructions
Switching on/off
1. Connect themains adaptor to thesocket (16) and to awall socket.
2. When theradio is connected to themains supply it will enter standbymode.
Themessage “Welcome to Digital Radio” will appear on thedisplay for amoment
before being replaced by aflashingclock.
3. Theclock will be set automatically if there is FM or DAB radio reception.
Note: Iftheclock is not set automatically, thetime can be set manually, refer to
theSetting thetime and date sectionbelow.
4. Switch theradio on by pressing [ ].
5. Thefirst time theradio is turned on, it will perform anautomatic search for DAB
radio channels.
6. Whilst theradio is scanning, “Scanning…” will appear
on thedisplay along with aprogress bar indicator and
anumber showing how many channels have beenfound.
Oncethescan has finished, theradio will select thefirst
alphanumerically found channel.
Note: Ifno DAB channels are found “No DAB Station” will appear on thedisplay.
Thereafter theradio will change to showing theDABmenu.
Make sure that DAB broadcasts are available in your geographicalarea.
If reception is poor, try to change theposition of theaerial or move theradio to
improve reception.
Refer to theDAB menu section to carry out anew channel search.
Audio setting
Adjust thevolume by turning [ VOLUME/SELECT ll ] (3).
Display backlight
Adjust thedisplay backlight by repeatedly pressing [ DIMMER/SNOOZE ] (8). Thereare
four settings to choosefrom: Low, Medium, High and Off.
Setting the time and date
Theradio automatically sets thetime and date with thehelp of DAB or FM radio
signals. Thetime and date can also be set manually if theradio signal is tooweak:
1. Press and hold in [ MENU/INFO ]. Press [ |◄◄ ] or [ ►►| ] repeatedly to navigate
themenu.
2. Select System. Press [ VOLUME/SELECT ll ] to confirm.
3. Select Time. Press [ VOLUME/SELECT ll ] to confirm.
4. Select Set Time/Date. Press [ VOLUME/SELECT ll ] to confirm. “Set Time”
appears on thedisplay and thehoursflash.
5. Set thehours with [ |◄◄ ] or [ ►►| ] and confirm with [ VOLUME/SELECT ll ].
6. Repeat thesame procedure for theminutes, day, month andyear. Confirm each
step with [ VOLUME/SELECT ll ].
6
English
7. When each step has been performed thesettings will be saved and “Time Saved”
will appear on thedisplay.
8. Press [ MENU/INFO ] to return to normal displaymode.
DAB radio
Select audio source: Press [ MODE ] repeatedly until “DAB” appears on thedisplay.
Thecurrent radio channel will then be shown on thedisplay.
If no channels are saved in theradio anautomatic search for DAB channels will be
initiated.
Choosing radio channels
1. Press [ |◄◄ ] or [ ►►| ] to select achannel from thechannellist. Thedisplay will
then show “Station list” and thechannelname. Press [ VOLUME/SELECT ll ] to
confirm.
2. Up to 10 channels can be saved as preset channels on alist so that you can
choose your favourite stations more quickly. Referto thePreset channels
sectionbelow.
Note: Iftheradio is moved to anew location or if radio stations change frequencies,
some preset channels might become unavailable. Iftheradio does not find
theselected channel, “Service not available” will appear on thedisplay. Referto
theDAB menu section to carry out anew search and to delete any unavailable
channels from thechannellist.
DAB menu
1. In DAB mode, press hold in [ MENU/INFO ] to go to theDABmenu.
2. Press [ |◄◄ ] or [ ►►| ] repeatedly to navigate themenu.
3. Press [ VOLUME/SELECT ll ] to select amenu/function.
4. Press [ MENU/INFO ] to go back one step in themenu.
Thesettings marked with anasterisk are thecurrent settings.
Thefollowing
menus will
appear:
7
English
1. Full Scan: Automatic scan for DAB radio channels.
- Press [ VOLUME/SELECT ll ] to confirm. Theradio automatically starts
scanning for DAB radio channels.
2. Manualtune: Manual scan for DAB radio channels.
- Press [ |◄◄ ] or [ ►►| ] repeatedly and select Manual tune. Press [ VOLUME/
SELECT ll ] to confirm. Thechannel number and frequency will be displayed.
- Press [ |◄◄ ] or [ ►►| ] repeatedly to manually select achannel.
Press[ VOLUME/SELECT ll ] to confirm.
3. Prune: Clearthechannel list of unavailable radio channels.
- Press [ |◄◄ ] or [ ►►| ] to select Yes or No. Press [ VOLUME/SELECT ll ] to
confirm. Yes clears thechannel list and No aborts theclearance.
4. System: Choose from thefollowing list of sub-menus:
- Time: Setting thetime and date
- Factory Reset: Resettheradio to thefactory settings.
- SW version: Showsthecurrent software version.
- Sleep: Sleeptimer.
Time
Select asub-menu by pressing [ |◄◄ ] or [ ►►| ] therequired number oftimes.
Press[ VOLUME/SELECT ll ] to confirm.
Set Time/Date: Setsthetime and date, see theSetting thetime sectionabove.
Auto update submenus:
- Update from Any (update time using DAB or FM radio signals).
- Update from DAB (update time using DAB radio signals).
- Update from FM (update time using FM radio signals).
- No update (no automatic update, set time manually).
Set 12/24hour: Selects a12 or 24 hour clock display.
Set date format: sets thedate display format (day-month-year/month-day-year).
Factory Reset
Reset to factory default settings. Select No to cancel or Yes to confirm.
Press[ VOLUME/SELECT ll ] to confirm.
SW version
Press [ VOLUME/SELECT ll ] to show info about thesoftware version.
Sleep
Set how long theradio is to be left on before it automatically shutsoff. Selection
options: Off, 10, 20, 30, 60, 70, 80 or 90min.
Example: Ifthetime delay is set for 60 minutes, “S6” will be shown on thedisplay to
indicate that thesleep timer is activated.
8
English
Display options (DAB mode)
Press [ MENU/INFO ] repeatedly to display information about thecurrent radio channel.
Thefollowing information can be displayed:
Radiotext: Showstext information transmitted on thechannel.
Signal strength: Showsthesignal strength of thechannel.
Programmetype: Showsthecurrent programme type (genre).
Ensemble: Showsthegroup name of thechannels transmitted on thesame
frequency.
Frequency: Showsthechannel number and frequency of theradio channel.
Signalerror: Showsthesignal quality of thechannel.
Audio bitrate: Showsthebit rate of theaudio stream.
Time: Showscurrenttime
Date: Showscurrentdate
FM radio
Select audio source: Press [ MODE ] repeatedly until “FM” appears on thedisplay.
Thereafter display will show thechosen radio channel/frequency.
Tuning knob
1. Manual tuning: Press [ |◄◄ ] or [ ►►| ] repeatedly to navigate through
thefrequencyband.
2. Automatic search: Holdin [ |◄◄ ] or [ ►►| ] or quick-press [ VOLUME/SELECT ll ]
to automatically search for thenext detectable radio channel. Thesearch stops
when achannel has beenfound.
Up to 10 channels can be saved as preset channels on alist so that you can
choose your favourite stations more quickly. Referto thePreset channels
sectionbelow.
3. If theselected channel transmits RDS information (Radio Data System), thename
of channel will be shown on thedisplay.
FM menu
1. In FM mode, press and hold in [ MENU/INFO ] to go to theFMmenu.
2. Press [ |◄◄ ] or [ ►►| ] repeatedly to navigate themenu.
3. Press [ VOLUME/SELECT ll ] to select thechosen menu/function.
4. Press [ MENU/INFO ] to go back one step in themenu.
Thesettings marked with anasterisk are thecurrent settings.
9
English
Thefollowing
menus will appear:
1. Scan setting: Choose thesensitivity for scanning for FM channels. Press [ |◄◄ ]
or [ ►►| ] to select either Strong stations only (low sensitivity) or All stations
(highsensitivity). Press [ VOLUME/SELECT ll ] to confirm.
2. Audio setting: Select whether you wish to receive stereo audio or if you want
to receive transmissions inmono. Inpoor reception conditions mono can
improve thesound quality. Press [ |◄◄ ] or [ ►►| ] to select Stereo allowed or
Forcedmono. Press [ VOLUME/SELECT ll ] to confirm.
3. System: Choose from thefollowing list of sub-menus:
- Time: Setting thetime and date
- Factory Reset: Resettheradio to thefactory settings.
- SW version: Showsthecurrent software version.
- Sleep: Sleeptimer.
Time
Select asub-menu by pressing [ |◄◄ ] or [ ►►| ] therequired number oftimes.
Press[ VOLUME/SELECT ll ] to confirm.
Set Time/Date: Setsthetime and date, see theSetting thetime sectionabove.
Auto update submenus:
- Update from Any (update time using DAB or FM radio signals).
- Update from DAB (update time using DAB radio signals).
- Update from FM (update time using FM radio signals).
- No update (no automatic update, set time manually).
Set 12/24hour: Selects a12 or 24 hour clock display.
Set date format: sets thedate display format (day-month-year/month-day-year).
10
English
Factory Reset
Reset to factory default settings. Select No to cancel or Yes to confirm.
Press[ VOLUME/SELECT ll ] to confirm.
SW version
Press [ VOLUME/SELECT ll ] to show info about thesoftware version.
Sleep
Set how long theradio is to be left on before it automatically shutsoff. Selection
options: Off, 10, 20, 30, 60, 70, 80 or 90min.
Example: Ifthetime delay is set for 60 minutes, “S6” will be shown on thedisplay to
indicate that thesleep timer is activated.
Display options (FM mode)
Press [ MENU/INFO ] repeatedly to display information about thecurrent radio channel.
Note: Information about thecurrent radio channel is only shown if theFM channel
sends out RDSdata.
Thefollowing information can be displayed:
Radio Text: Showstext information transmitted on thechannel.
Programme Type: Showsthecurrent programme type (genre).
Frequency: Showsthefrequency of thechannel.
Audiomode: Showswhether thetransmission is received in stereo ormono.
Time: Showscurrenttime
Date: Showscurrentdate
11
English
Preset channels
Up to 10 stations can be preset in both DAB and FM mode, this will enable you to
access your favourite stations more quickly.
Note: Nomore than 5 seconds must elapse between button-presses otherwise
theradio will return to theprevious displaymode.
Saving a radio channel as a preset channel
1. Choose thechannel that you wish tosave.
2. Hold in [ PRESET ] until thechannel appears in thedisplay.
3. Select apreset slot for thechannel by pressing [ |◄◄ ] or [ ►►| ].
4. Save by pressing [ VOLUME/SELECT ll ]. “Preset # stored” will appear on
thedisplay.
Selecting a channel from the preset channels
1. Press [ PRESET ]. “Preset Recall” will appear on thedisplay.
2. Press [ |◄◄ ] or [ ►►| ] repeatedly to navigate thepreset channellist.
3. Select achannel slot and confirm by pressing [ VOLUME/SELECT ll ].
If you choose achannel slot which has no preset radio channel on it, “Preset Empty”
will be shown on thedisplay.
External devices
Bluetooth
1. Select audio source: Press [ MODE ] repeatedly until “Bluetooth” appears on
thedisplay.
2. Make sure that no other Bluetooth device is connected to theradio.
“Disconnected” will appear on thedisplay.
3. Activate Bluetooth on thedevice which is to be paired with theradio.
4. Thespeaker will appear on your device as DAB X50, select it and pair it with your
device. Referto theinstruction manual of your device for further clarification if you
are unsure.
5. “Connected” will appear on thedisplay once they are connected/paired.
6. Control playback from theexternal device and theradio.
Note: Ifyou are prompted to enter aPIN code on your device, you should enter 0000
(four zeroes). Certain devices may also require you to approve theconnection.
Audio source input (AUX IN)
1. Connect anexternal audio source to the3.5mm input jack (14) on theback of theradio.
2. Select audio source: Press [ MODE ] repeatedly until “Auxiliary Input” appears on
thedisplay.
3. Start playback on theexternal audio source.
4. Adjust thevolume to adesiredlevel.
12
English
Alarm
Setting alarm 1
1. Switch theclock radioon.
2. Press [ ALARM ]once. “Alarm 1 Setup” will appear on thedisplay.
3. Press [ VOLUME/SELECT ll ]. “Alarm 1 Wizard” will appear on thedisplay.
4. Set thealarm using [ |◄◄ ] or [ ►►| ] and confirm each step by pressing
[ VOLUME/SELECT ll ].
5. Make thesettings in thefollowingorder:
- On time (alarm time): hour/min.
- Duration (alarm duration): 15, 30, 45, 60 or 90min.
- Source (alarm signal): buzzer, DAB or FM (if DAB or FM radio is chosen, you
will be prompted to select aradio channel).
- Choose when thealarm is tosound: Daily, Once, Weekends, Weekdays.
IfOnce is chosen, you will be prompted to select adate.
- Volume (alarm volume): Setsthealarm volume setting. Thealarm will start at
alow volume and steadily increase until theset volume level is reached.
- Alarm On/Off.
Setting alarm 2
1. Switch theradio on by pressing [ ].
2. Press [ ALARM ]twice. “Alarm 2 Setup” will appear on thedisplay.
3. Then follow thesame steps as those used for setting alarm 1 as describedabove.
Snooze
Press [ DIMMER/SNOOZE ] when thealarm sounds. Presstherequired number of
times to select thesnooze duration setting that you desire, 5, 10, 15 or 30 minutes.
Thesnooze feature will then display acountdown for thetime you haveset.
Switching the alarm off
Press [ ] to stop thealarm sounding.
Activating/Deactivating a programmed alarm
In “on”mode:
1. Select which alarm is to be activated/deactivated by pressing [ ALARM ] repeatedly.
2. Press [ |◄◄ ] or [ ►►| ] repeatedly to select On (activate) or Off (deactivate).
Confirm by pressing [ SELECT ].
In standbymode:
Press [ ALARM ] therequired number of times to activate/deactivate either of
therespective alarms.
13
English
Care and maintenance
Theradio can be wiped clean using asoft, drycloth.
If theradio is not to be used for anextended period, it should be unplugged and
stored in adry and dust-free location.
Troubleshooting guide
Theradio won’t
turnon.
Make sure that theadaptor and mains lead are intact and
undamaged.
Make sure that themains adaptor and its lead are properly
connected both to awall socket and theradio.
Is thewall socketlive?
No sound from
thespeaker
or connected
headphones.
Check thevolume.
Make sure that there are no headphones connected to
the3.5mm headphone socket. Thespeaker is switched off
when theheadphones are connected.
Make sure that theheadphones and cord are intact and
properly connected theradio.
No sound from
connected external
device.
Make sure that thecorrect audio source has been chosen.
Check thevolume level on both theradio and theconnected
device.
If using Bluetooth
Make sure that theBluetooth connection has been properly
established.
Test theplayback from your external Bluetooth device before
connectingit.
Things to consider
Other wireless devices in thevicinity can impair therange of
theradio. Therange can also be affected by thetype of obstacles
located between thetransmitter and thereceiver (e.g. aconcrete
wall will interfere with thesignal more than aplasterboard wall).
If using theAUX IN
Check that thecable connecting thedevice and theradio is
undamaged and properly connected.
Check that thecorrect audio source has been chosen
(Auxiliary Input).
Poor or non-existent
radio reception.
Theautomatic FM
scan doesn’twork.
Make sure that theaerial is fully extended.
Try moving theaerial.
Move theradio to another location.
If theradio is
operating abnormally
in some otherway.
Perform afactoryreset. Referto theFM menu/DAB menu
sectionsabove.
14
English
Responsible disposal
This symbol indicates that this product should not be disposed of with
general householdwaste. Thisapplies throughout theentire EU. Inorder
to prevent any harm to theenvironment or health hazards caused by
incorrect waste disposal, theproduct must be handed in for recycling
so that thematerial can be disposed of in aresponsible manner.
Whenrecycling your product, take it to your local collection facility or
contact theplace of purchase. Theywill ensure that theproduct is
disposed of in anenvironmentally sound manner.
Specifications
Radio
Frequencyrange FM87.5–108MHz, DAB: 174–240MHz
Power consumption 18W
Standby power consumption < 1W
Bluetoothrange Approx. 8m
Operating temperature 5–35°C
Size 135×230×135mm
Weight 1.5kg
Mains adaptor
Input 100–240 V AC, 50/60 Hz, 0.8A
Out 9 V DC, 2.0 A
15
Svenska
DAB+/FM-radio med Bluetooth
Art.nr 38-8182 Modell DAB X50
Läs igenom hela bruksanvisningen före användning och spara den sedan för fram-
tidabruk. Vireserverar oss förev. text- och bildfel samt ändringar av tekniskadata.
Vidtekniska problem eller andra frågor, kontakta vår kundtjänst (se adressuppgifter
påbaksidan).
Säkerhet
Produkten får inte demonteras eller ändras. Farlig spänning finns oskyddad på
komponenter under produktenshölje. Kontakt med dessa kan leda till brand eller
elektriskstöt.
Produkten är endast avsedd för inomhusbruk.
Utsätt aldrig produkten för höga temperaturer, dammig miljö, starka vibrationer,
stötar, fukt ellerväta.
Placera inte produkten så att den kan falla ner ivatten eller annan vätska. Ställinte
några föremål som innehåller vätska på produkten,t.ex. enblomvas ellerdryck.
Täck inte över produkten. Tillräcklig ventilation, med ettminsta avstånd på
ca10cm mellan produkten och omgivande ytor, är nödvändig för att förhindra
attprodukten blir förvarm.
Bryt strömmen till produkten genom att dra ut nätadaptern ur vägguttaget.
Nätadaptern måste vara lättåtkomlig.
Produktens på/av-knapp bryter inte strömmen från elnätet.
Skydda din hörsel. Lyssning med hög volym under lång tid kan leda till bestående
hörselskador.
Låt behörig personal utföra service och reparationer och endast med
originalreservdelar.
16
Svenska
10
11
12
13
14
15
16
1 6
2 7
3
4 8
5 9
Produktbeskrivning
1. [ MODE ] Val av ljudkälla: FM-radio, DAB-radio,
Bluetooth eller Auxiliary Input (ljudingång).
2. [ ] På/av
3. [ VOLUME/SELECTll ] Volym, sök efter
radiokanal, menyhantering, bekräfta, Bluetooth,
play/pause.
4. [ MENU/INFO ] Håll in för meny, tryck kort för
info och för att backa ur menyval.
5. [ l◄◄ ] Sök efter radiokanal nedåt
ifrekvensbandet, menyhantering, byt spår
iBluetooth-anslutenenhet.
6. [ PRESET ] Spara radiokanaler, välj sparad
radiokanal.
7. [ ALARM ] Inställning av alarm 1 och 2.
8. [ DIMMER/SNOOZE ] Inställning av
dimmerfunktion och snoozefunktion.
9. [ l ] Sök efter radiokanal uppåt
ifrekvensbandet, menyhantering, byt spår
iBluetooth-anslutenenhet.
10. Display
11. Högtalare
12. Antenn
13. 3,5 mm-anslutning för hörlurar.
14. 3,5 mm AUX IN-anslutning för externa enheter.
15. USB-anslutning för laddning av externa enheter.
16. Anslutning för medföljande nätadapter.
17
Svenska
Användning
På/av
1. Anslut nätadaptern till anslutningen (16) och till ettvägguttag.
2. När radion ansluts till elnätet sätts den istandbyläge. Displayen visar ”Welcome to
Digital Radio” ettögonblick varefter klockan blinkar idisplayen.
3. Klockan kommer att ställas in automatiskt om det finns FM- eller DAB-
radiomottagning.
Obs! Omklockan inte ställs in automatiskt kan tidsinställning göras manuellt, se
avsnitt Inställning av tid och datumnedan.
4. Slå på radion genom att trycka [ ].
5. När radion slås på första gången startas enautomatisk sökning efter DAB-
radiokanaler.
6. Under sökningen visas ”Scanning…” tillsammans med
enindikator samt ensiffra för hur många radiokanaler som
hittats. Närsökningen är klar väljer radion den först numeriskt
hittade kanalen.
Obs! Ominga radiokanaler hittas under sökningen visas ”No DAB Station”
idisplayen. Därefter övergår radion till att visa DAB-menyn.
Kontrollera att DAB-utsändningar finns iditt geografiska område.
Prova att rikta om antennen eller flytta enheten till enannanplats.
Se avsnitt DAB-meny för att göra enny sökning.
Ljudinställning
Justera volymen genom att vrida [ VOLUME/SELECTll ] (3).
Displaybelysning
Justera displayens bakgrundsbelysning genom att trycka upprepade gånger på
[ DIMMER/SNOOZE ] (8). Väljmellan Low, Medium, High och Off.
Tidsinställning
Radion ställer automatiskt in tid och datum med hjälp av DAB- eller FM-radiosignal.
Omradiosignalen är svag kan tid och datum behöva ställas in manuellt:
1. Tryck och håll in [ MENU/INFO ]. Tryckupprepade gånger på [ |◄◄ ] eller [ ►►| ] för
att stega genommenyn.
2. Välj System. Tryck [ VOLUME/SELECT ll ] för att bekräfta.
3. Välj Time. Tryck [ VOLUME/SELECT ll ] för att bekräfta.
4. Välj Set Time/Date. Tryck [ VOLUME/SELECT ll ] för att bekräfta. Displayen visar
”Set Time” och timmarna blinkar.
5. Ställ in timmar med [ |◄◄ ] eller [ ►►| ] och bekräfta med [ VOLUME/SELECT ll ].
6. Upprepa samma procedur för minuter, dag, månad ochår. Bekräfta varje steg med
[ VOLUME/SELECT ll ].
18
Svenska
7. När alla steg är genomförda sparas inställningarna och displayen visar
”TimeSaved”.
8. Tryck [ MENU/INFO ] kort för att återgå till normal display.
DAB-radio
Välj ljudkälla: Tryck [ MODE ] upprepade gånger tills ”DAB” visas idisplayen. Displayen
visar därefter aktuell radiokanal.
Finns det inga radiokanaler lagrade iradion startas enautomatisk sökning av DAB-
kanaler.
Välja radiokanal
1. Tryck [ |◄◄ ] eller [ ►►| ] för att välja enradiokanal ikanallistan. Displayen visar
”Station list” och kanalnamn. Tryck [ VOLUME/SELECT ll ] för att bekräfta.
2. Det finns möjlighet att spara upp till 10 kanaler ienfavoritlista för att snabbt kunna
väljakanal. Seavsnitt Favoritlistanedan.
Obs! Omradion flyttas till enny plats eller om radiokanaler byter frekvensetc. så kan
vissa lagrade kanaler bli otillgängliga. Närradion inte hittar vald kanal visas ”Service
not available” idisplayen. Seavsnitt DAB-meny för att göra enny sökning och för att
rensa kanallistan från otillgängliga radiokanaler.
DAB-meny
1. IDAB-läge, tryck och håll in [ MENU/INFO ] för att komma till DAB-menyn.
2. Tryck upprepade gånger på [ |◄◄ ] eller [ ►►| ] för att stega genommenyn.
3. Tryck [ VOLUME/SELECT ll ] för att välja vald meny/funktion.
4. Tryck [ MENU/INFO ] för att backa tillbaka ettsteg imenyn.
De inställningar som markeras med enasterisk visar aktuell inställning.
Följande
menyervisas:
19
Svenska
1. Fullscan: Automatisk sökning efter DAB-radiokanaler.
- Tryck [ VOLUME/SELECT ll ] för att bekräfta. Radion startar enautomatisk
sökning av DAB-kanaler.
2. Manualtune: Manuell sökning av DAB-radiokanaler.
- Tryck upprepade gånger på [ |◄◄ ] eller [ ►►| ] och välj Manualtune.
Tryck[ VOLUME/SELECT ll ] för att bekräfta. Displayen visar kanalnummer
och frekvens.
- Tryck upprepade gånger på [ |◄◄ ] eller [ ►►| ] för att manuellt väljakanal.
Tryck [ VOLUME/SELECT ll ] för att bekräfta.
3. Prune: Rensakanallistan från otillgängliga radiokanaler.
- Tryck [ |◄◄ ] eller [ ►►| ] för att välja Yes eller No. Tryck [ VOLUME/SELECT ll ]
för att bekräfta. Yesrensar kanallistan och No avbryter rensningen.
4. System: Väljmellan följande undermenyer:
- Time: Inställning av tid ochdatum.
- Factory Reset: Återställer radion till fabriksinställningar.
- SW version: Visaraktuell mjukvara.
- Sleep: Insomningstimer.
Time
Välj undermeny genom att trycka [ |◄◄ ] eller [ ►►| ] upprepade gånger.
Tryck[ VOLUME/SELECT ll ] för att bekräfta.
Set Time/Date: ställ in tid och datum, se avsnitt Tidsinställningovan.
Auto update: har fyra undermenyer:
- Update from Any (uppdatera tiden från DAB- eller FM-sändare).
- Update from DAB (uppdatera tiden från DAB-sändare).
- Update from FM (uppdatera tiden från FM-sändare).
- No update (ingen automatisk uppdatering, ställ in tiden manuellt).
Set 12/24hour: ställ in 12- eller 24-timmars tidvisning.
Set date format: ställ in datumformat (dag-månad-år/månad-dag-år).
Factory Reset
Återställning till fabriksinställningarna. VäljNo (ingen återställning) eller Yes (återställning).
Tryck [ VOLUME/SELECT ll ] för att bekräfta.
SW version
Tryck [ VOLUME/SELECT ll ] för att visa versionsinfo.
Sleep
Ställ in hur lång tid radion ska vara igång innan den automatiskt stängsav.
Väljmellan:Off (av), 10, 20, 30, 60, 70, 80 eller 90min.
Ex.: Omtiden ställs in på 60 minuter visar displayen ”S6” för att indikera att
insomningstimern är aktiverad.
20
Svenska
Visningsalternativ (DAB-läge)
Tryck upprepade gånger på [ MENU/INFO ] för att visa information om enheten och
aktuell radiokanal. Displayenvisar:
Radiotext: Visartextinformation som kanalen sänderut.
Signal strength: Visarkanalens signalstyrka.
Programmetype: Visaraktuell programtyp (genre).
Ensemble: Visargruppnamnet för de kanaler som sänder på samma frekvens.
Frequency: Visarradiokanalens kanalnummer och frekvens.
Signalerror: Visarkanalens signalkvalitet.
Audio bitrate: Visarljudströmmens bithastighet.
Time: Visaraktuelltid.
Date: Visaraktuelltdatum.
FM-radio
Välj ljudkälla: Tryck [ MODE ] upprepade gånger tills ”FM” visas idisplayen.
Displayenvisar därefter vald radiokanal/frekvens.
Inställning av radiokanal
1. Manuell inställning: Tryckupprepade gånger på [ |◄◄ ] eller [ ►►| ] för att stega
uppåt eller nedåt ifrekvensbandet.
2. Automatisk sökning: Hållin [ |◄◄ ], [ ►►| ] eller tryck [ VOLUME/SELECT ll ] kort
för att automatisk söka efter nästa radiokanal. Sökningen stoppas när nästa kanal
hittas.
Det finns möjlighet att spara upp till 10 kanaler ienfavoritlista för att snabbt kunna
väljakanal. Seavsnitt Favoritlistanedan.
3. Om vald radiokanal sänder ut RDS-information (Radio Data System) visas kanalens
namn idisplayen.
FM-meny
1. IFM-läge, håll in [ MENU/INFO ] för att komma till FM-menyn.
2. Tryck upprepade gånger på [ |◄◄ ] eller [ ►►| ] för att stega genommenyn.
3. Tryck [ VOLUME/SELECT ll ] för att välja vald meny/funktion.
4. Tryck [ MENU/INFO ] för att backa tillbaka ettsteg imenyn.
De inställningar som markeras med enasterisk visar aktuell inställning.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52

Exibel DAB X50 User manual

Category
Alarm clocks
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI