Hobart AmerScale Scale User manual

Brand: Hobart

Model: AmerScale Scale

Type: User manual

This manual is also suitable for

AmeriScale

NSTRUCTIONS

AmeriScale™

Model AMERI 3

ML-28984

FORM 33836 (4/97)

AMERISCALE

★

701 RIDGE AVENUE

TROY, OHIO 45374-0001

– 2 –

This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part

15 of FCC Rules. These limits are designed to provide reasonable protection against interference when the

equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions manual, may cause

interference to radio communications. Operation of this equipment in a residential area is likely to cause

interference in which case the user will be required to correct the interference at his own expense.

To meet Class A limits, the user must observe the following requirements:

1. Only factory approved cables may be used to connect this digital device with any peripherals.

2. Only factory approved peripherals may be connected to this digital device.

3. Any changes or modifications to the equipment, unless expressly approved by the manufacturer, could

void the FCC's permission to operate the equipment.

Verification of weight should be done routinely by placing a known weight on the platter and checking the

displayed weight. If the scale does not function as described in this manual, contact your local Hobart Service

Office for re-calibration, service, or repair.

– 3 –

TABLE OF CONTENTS

GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

USER GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

ELECTRICAL CONNECTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

LEVELING THE SCALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

DISCONNECTION AND POWER-UP. . . . . . . . . . . . . . . . . . . . . . . . . . . 5

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

KEYPAD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

KEYPAD ENTRIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

ACCUMULATOR LIMITS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Illuminated Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

MISCELLANEOUS PLU MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PRICING TYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

By Weight (U.S.) ( 1 lb, or 1 – 9 lb for ) . . . . . . . . . . . . . . . . . . . . . . 8

By Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

PLU EDIT MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Programming Worksheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

PLU LOOKUP MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Special Tare Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Portion Control Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Platter Tare Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

PREPACK. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

ACCUMULATOR FUNCTIONS, TOTALS . . . . . . . . . . . . . . . . . . . . . . . 12

METRIC DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

METRIC PRICING TYPES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

By Weight (Metric) ( 1 kg, or 100 grams ) . . . . . . . . . . . . . . . . . . . . . 14

By Count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

SERVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

– 4 –

PL-40169-1

Platter

Adaptor

Security Plate

Display

Keypad

Level

AmeriScale

Installation, Operation, and Care of

AmeriScale™

SAVE THESE INSTRUCTIONS

GENERAL

The Hobart AmeriScale is a durable, compact weighing device. Two digital displays show the weight,

unit price, and total price to the seller and buyer at the same time. The scale can calculate the value

of either weighed or by count items and can accumulate the total price for multiple items.

The maximum capacity is 30 pounds. The maximum metric capacity is 15 kg. The maximum capacity

includes any Tare weight subtracted for packaging. The increment or division size is available as

shown in the table.

Avoirdupois (US Pounds)* Metric (Kilograms)*

Total

Weight - 0-30 lb. 0-10 lb. 10-30 lb. 0-15 kg 0-6 kg 6-15 kg

Range

Increment

or Division .01 lb. .005 lb. .01 lb. .005 kg .002 kg .005 kg

Size

* For U.S. Pounds, when scale weight reaches 10 lb. the .01 lb. increment is used until the scale returns to zero. For Metric

Kilograms, when scale weight reaches 6 kg. the .005 kg increment is used until the scale returns to zero.

USER GUIDELINES

Do NOT jar the weighing platter or drop objects on it.

Do NOT press keys hard; a light touch is sufficient.

Avoid locations with vibration; avoid direct sunlight.

Do NOT splash water on the scale.

WARNING: UNPLUG BEFORE CLEANING.

Clean the cover and weighing platter by wiping with

a dry or lightly moistened cloth. The stainless steel

platter can be removed (by lifting straight up) and

washed in a sink with mild detergent and warm

water. Do NOT use solvent or abrasive materials for

cleaning. Replace the platter after it is clean and dry.

★

– 5 –

INSTALLATION

Immediately after unpacking, check for possible shipping damage. If this unit is found to be damaged,

save the packaging material and contact the carrier within 15 days of delivery.

The Security Plate is available and can be used by Weights and Measures after calibration to seal the

scale if they use a lead-wire type seal.

ELECTRICAL CONNECTION

Connect the wall-mount adapter plug to a 120 V, 60 Hz, 1 ph electrical outlet. The adapter converts

to 12 Volts

DC,

.8 Amp, required for the scale to operate. Alternatively, a Vehicle Adapter with 20 foot

cord is available and allows connection to the cigarette lighter on any car or truck having a 12 Volt

electrical system. With either voltage source, connect the small round 12 Volt

connector to the

mating terminal on the left side of the scale.

LEVELING THE SCALE

Level the scale by turning the feet in or out until the bubble indicator is centered. A Locking Nut,

provided on the threaded shaft of each foot, allows the level adjustment to be locked-in.

DISCONNECTION AND POWER-UP

If the scale is disconnected, the accumulator total and any displayed values will be lost. When powerup

occurs, the scale will resume in MISCELLANEOUS PLU MODE. Disconnection and powerup will always

retain the programmed values of the 30 PLUs saved during a previous PLU EDIT MODE.

– 6 –

OPERATION

KEYPAD

Enter numeric values for PLU, By Count, Tare, lb/for, and Price.

Look-up or edit pricing values for any PLU numbered 1 – 30.

For By Count Pricing, set how many pieces (1 – 99) are being sold for the price.

For By Weight pricing, enter the tare value to be subtracted from the weight.

Enter the price (up to 999.99).

Add the total price to the Accumulated Total. Net Weight must be greater than twice the

increment or division size. [Initial versions of AmeriScale will not accommodate

connection of a peripheral printer. Future upgrades/options may permit an optional

peripheral printer, which, if connected, would print the total price of the item.]

Clear various values depending on when it is pressed.

For Multiple Pounds pricing, set how many pounds (1– 9) are being sold for the price.

[ If configured for metric weighing and enabled, the item is priced for 100 grams instead

of 1 kg.]

Prepack/Date locks-in current pricing and allows several items with the same price to be

weighed and priced. Totals can be accumulated. Prepack can only be activated when

a unit price is displayed. Press Clear

to exit Prepack and return pricing values to zero.

Set the scale to zero weight.

Display the Accumulated Total (Packages and Total Price)*. [Initial versions of

AmeriScale will not accommodate connection of a peripheral printer. Future upgrades/

options may permit an optional peripheral printer, which, if connected, would print the

Accumulated Total.]

[ Press Print/Total A SECOND TIME to return to pricing values without clearing the total.]

KEYPAD ENTRIES

•Whenever a valid keypad entry is made, a single beep will sound.

•Invalid entries will be signaled by a single beep followed by a series of rapid beeps.

* ACCUMULATOR LIMITS

The accumulator, ( ) , can add up to 60,000 packages. The price total can run up to 9999.99 or

999.99 (with 5 digit total price display) depending on the configuration.

100g

lb/for

PLU

Pcs

– 7 –

DISPLAY

WEIGHT/COUNT

Displays Total Weight, Net Weight, Tare, or By Count Quantity, as indicated.

UNIT PRICE $

Numeric entries are displayed here prior to being identified as Tare, Price, By Count, or lb For.

The programmed Unit Price may be per: pound, 1 to 9 pounds, count, kg, or 100g, as indicated.

TOTAL PRICE $

Displays the total price of this transaction or the Accumulator Total, as indicated.

An illuminated "∇" displayed above the term indicates . . .

TARE

The tare is displayed in the weight field.

ZERO

The scale's platter weight is stable at 0.00 in .01 lb. or 0.000 in .005 lb.

NET

The tare is subtracted from the total weight.

lb The weight is in U.S. pounds.

kg The weight is in Kilograms.**

FOR

The

Pounds For

quantity (the number of pounds sold for the Unit Price) is displayed. The

lb for

feature can only be used if Price is less than $ 100.00.

PREPACK

The unit price remains the same for all items in the group.

100g

FOR

The Unit Price is for 100 grams.**

PROG

In PLU EDIT MODE: Edit the pricing values for PLU's.

ACCUM

The Accumulated Total is more than $ 0.00.

TOTAL

The Total Price is the Accumulated Total.

* If configured for metric weighing, the scale's platter weight is stable at 0.000 kg.

** Metric weighing is not available when configured for U.S. pounds. Also, 100 g pricing

may be disabled on metric scales.

– 8 –

Pricing values can be entered in one of three modes: 1) In Miscellaneous PLU Mode where, once

entered, pricing codes are cleared when totaled. 2) As a change to the programmed pricing values

during PLU Edit Mode. 3) As a temporary override to a PLU during PLU Lookup Mode.

NOTE: The following Mode information is written from the Operator Display perspective. Fields and

information on the elevated display (optional) will appear different.

MISCELLANEOUS PLU MODE

Following power-up and rezero, the scale enters

Miscellaneous PLU Mode, indicated by the display —

all pricing values equal 0.00.

Manually enter the pricing values for an item by entering a numeric value followed by its identifier:

Price, Tare, By Count, or lb For — until the required pricing is displayed. Accumulator (Totals), Tare,

and Prepack functions are available to add individual total prices, display or edit the Tare, or repeat item

pricing for multiple items. Platter Tare Function (page 10) can be used if no Tare or By Count has been

entered.

PRICING TYPES

An example of each U.S. pricing type follows:

By Weight ~ ( lb ) ~ priced for 1 pound (example: Tare = .05 lb; Unit price = 1.99/lb).

By Weight ~ ( lb for ) ~ priced for 1 to 9 pounds (example: Tare = 0.15 lb; Unit price = 5 lb for 3.99).

100g

lb/for

By Count ~ ( Pcs ) ~ priced for the number of pieces (example: By Count = 4; Unit price = 1.00).

Pcs

Subsequent override of the By Count value will multiply or divide

to yield the Total Price. Example:

Pcs

= .25.

* NOTE: ENTER ONLY THE ABOVE SEQUENCE.

Pcs

YIELDS A TOTAL PRICE OF 4.00.

– 9 –

Programming Worksheet

Tare lb For Pcs Unit Price PLU Number

PL 1

PL 2

PL 3

PL 4

PL 5

PL 6

PL 7

PL 8

PL 9

PL 10

PL 11

PL 12

PL 13

PL 14

PL 15

PL 16

PL 17

PL 18

PL 19

PL 20

PL 21

PL 22

PL 23

PL 24

PL 25

PL 26

PL 27

PL 28

PL 29

PL 30

PLU EDIT MODE

Enter a PLU number (1 – 30 ) and press the

PLU

key

TWICE to enter PLU Edit Mode. PLU # 1, shown in the

display, was entered as follows:

PLU

Initially all prices are set at 0.00 for each PLU. The

∇

light above

PROG

indicates you can re-program

the pricing values for this PLU.

• To program a PLU, enter a numeric value followed by its identifier: Price, Tare, By Count, or lb For

— until the required pricing is displayed.*

• As an example, to program a tare of 0.15 lb and unit

price of 2.99 per lb, enter as follows:

• Press the

PLU

key A THIRD TIME to save the displayed

pricing values for the PLU and go to PLU Lookup Mode.

* Clear

— reverts to the previous programmed values and exits to PLU Lookup Mode.

NOTE: To convert a By Count PLU to By Weight, enter

Pcs

– 10 –

PLU LOOKUP MODE

Enter a PLU number ( 1– 30 ) and press

PLU

ONCE — to

look up and display the programmed pricing for this

PLU. You can weigh items, obtain the total price of the

item, and optionally use the Accumulator (Totals),

Tare*, and/or Prepack functions.

Price information can be temporarily overridden (if not in Prepack) by entering a new numeric value,

followed by its identifier: Price, Tare, By Count, or lb For. The

key will clear the temporary override

and revert back to the programmed pricing for the PLU. If no override is present,

key will return

to MISCELLANEOUS PLU MODE.

Refer to PRICING TYPES, page 8, for By Weight and By Count pricing examples.

* Special Tare Function — allows view and edit of the current Tare value

If no numeric keys were pressed immediately before pressing the

key, the tare will display and can

be overridden; to return to the pricing display, press the

key A SECOND TIME. To revise a non-zero

tare with weight on the platter: Press

, enter the new tare, and press

again.

Portion Control Function — use special PLU 99 and repeat Tare for each added ingredient

PLU 99 allows you to add ingredients and Tare the weight back to zero repeatedly to control the weight

of each added ingredient type. This is handy for pizza preparation or other uses. No pricing applies.

➀ Access special PLU number 99 by entering:

PLU

➁ Put the item on the scale platter.

➂ Press

to make the weight read 0.00.

√ Add the ingredient until the desired portion displays as the weight ( X.XX lb).

➄ Repeat steps ➂ and √ for each ingredient type.

≈ When done, remove the item from the platter and press

once to begin another portion control

item at step ➁. Or, press

twice to return to MISCELLANEOUS PLU MODE.

NOTE: Special PLU 98 functions the same as PLU 99 but uses a 16.00 Unit Price to calculate each

added ingredient weight in ounces ( XX.XX oz ) in the Total Price display.

Platter Tare Function — PLUs with Tare value = 0.00

Any PLU that has 0.00 for the Tare value can have the Platter Tare entered — once only. NOTE: Platter

Tare Function is available in MISCELLANEOUS PLU MODE and PLU LOOKUP MODE but not in PREPACK.

➀ Access any PLU that has a Tare value equal to 0.00.

➁ Put packaging material on the scale's platter.

➂ Press

. NET WEIGHT displays 0.00.

√ Place the product with packaging material on the platter.

➄ Values for NET WEIGHT, UNIT PRICE, and TOTAL PRICE are displayed.

– 11 –

PREPACK

This provides a method of processing several items with the same price without needing to reenter the

price every time. Prepack can only be activated after a Unit Price has been entered or called up; View

it in the center display. Once Prepack is activated (by pressing ), the current pricing values are

locked-in until cleared to allow several items with the same price to be weighed and priced. Totals are

automatically added to the Accumulator.

You can use Prepack from Miscellaneous Product Mode or PLU Lookup Mode.

Press Clear

to exit Prepack and return pricing values to zero.

Example:

• To enter a Tare, weigh the packaging material and press

— The weight should read 0.00 with the packaging material still on the platter.

• Enter the Unit Price by pressing the number keys followed by

— The Unit Price should be displayed.

• Press to activate Prepack.

— The Prepack indicator is illuminated " ∇"; Price values are locked.

As each package is weighed, its Net Weight and Total Price will be displayed.

Remove the package from the platter to return the original Tare and Unit Price values.

The Package Price is automatically added to the Accumulator as each and every

package is weighed.

When all packages have been weighed (and totaled), you are ready to leave Prepack:

• Press

with nothing on the platter to return to Miscellaneous PLU Mode.

• To view / print the Accumulator Totals, press .

— Total Packages and Total Price are displayed.

• To clear the Accumulator Totals, press

– 12 –

ACCUMULATOR FUNCTIONS, TOTALS

Add the total price of Item 1 and Item 2; display the Total and clear the Total.

Item 1: Weigh empty package for tare; Unit Price = 1.99/lb; weigh item in package (1 pound).

Item 2: By Count = 4; Unit Price = 1.00; override to 6 pieces.

Begin at Miscellaneous PLU or Clear:

Zero the scale: .

Weigh the empty package and press

Enter the 1.99/lb unit price:

Place the first package on the scale.

Total Price = 1.95.

Add the total to the Accumulator: .

Tare and Unit Price return to zero*. ACCUM is lit.

Remove the package from the scale and the weight

returns to zero.

Call up a PLU priced 4 pieces for 1.00 or enter:

Pcs

Override the By Count quantity to 6 pieces:

Pcs

. The Price goes to 1.50.

Add the total to the Accumulator: .

Count and Unit Price return to zero*.

View the Accumulated Total: .

Clear the Total:

. ACCUM is not lit.

* If PREPACK was turned on, , the previous pricing values return after the total is accumulated.

To return to zero pricing values, clear:

During a run, you cannot void a single transaction. The entire run, Accum Total, must be cleared:

– 13 –

METRIC DISPLAY

WEIGHT / COUNT UNIT PRICE $ TOTAL PRICE $

WEIGHT/COUNT

Displays Total Weight, Net Weight, Tare, or By Count Quantity, as indicated.

UNIT PRICE $

Numeric entries are displayed here prior to being identified as Tare, Price, By Count, or 100g

For. The programmed Unit Price may be per: kg, 100g, or count, as indicated.

TOTAL PRICE $

Displays the total price of this transaction or the Accumulator Total, as indicated.

An illuminated "∇" displayed above the term indicates . . .

TARE

The tare is displayed in the weight field.*

ZERO

The scale's platter weight is stable at 0.00 in .005 kg or 0.000 in .002 kg.

NET

The tare is subtracted from the total weight.

2g The weight is in Kilograms and division size is .002 kg.*

5g The weight is in Kilograms and division size is .005 kg.*

FOR

Not applicable on metric scales.

PREPACK

The unit price remains the same for all items in the group.

100g

FOR

The Unit Price is for 100 grams.**

PROG

In PLU EDIT MODE: Edit the pricing values for PLU's.

ACCUM

The Accumulated Total is more than $ 0.00.

TOTAL

The Total Price is the Accumulated Total.

* In metric weighing, the Tare must be divisible by the metric weight increment.

** On metric scales, 100 g pricing may be disabled.

– 14 –

METRIC PRICING TYPES

Metric pricing (per kg and 100g) is configurable by your local Hobart service office. Use of the scale

as a metric weigher disables U.S. pounds pricing capability. Pricing per 100g can be disabled so all

weighed items are priced per kilogram. By Count pricing works the same with either pound or metric

weight configuration. In metric weighing, the Tare must be divisible by the metric weight increment.

The maximum allowable Tare is 9.995 kg.

By Weight (Metric) ~ priced for 1 kilogram (example: Tare = 0.020 kg; Unit price = 3.99/kg).

By Weight (Metric) ~ priced for 100 grams (example: Tare = 0.030 kg; Unit price = 1.99/100g).

100g

lb/for

Or, to save a keystroke, enter:

100g

lb/for

By Count ~ ( Pcs ) ~ priced for the number of pieces (example: By Count = 4; Unit price = 1.00).

Pcs

ENTER ONLY THE ABOVE SEQUENCE.

Pcs

YIELDS A TOTAL PRICE OF 4.00.

– 15 –

TROUBLESHOOTING

No display at power-up. Verify that the adapter plug is properly connected to the electrical outlet and

that the cord terminal is connected at the scale. Check the line circuit

breaker or fuse.

Weight not displayed. At power-up, the scale must be within 6 lb of the zero point at last calibration.

Verify that the platter is in place, no load is on the platter, and complete the

power-up cycle. If the problem is not resolved, re-calibration is indicated —

contact service.

Rezeroing the scale. After power-up, the scale will rezero up to .6 lb. If the zero point changed by

more than .6 lb, the scale can still operate by completing a power-up cycle

with the platter in place and no load on it. If the problem persists,

re-calibration is indicated — contact service.

Activating the weigher. If there is a weight displayed but the scale is not weighing, the tare is being

displayed. Press

to return to regular weighing operations.

Weighing inconsistency. Make sure the scale is level and that nothing is touching the sides or bottom

of the platter.

Key entering. If a numeric key entry is followed by a series of rapid beeps, the scale is set

for Prepack. Press

until the

PREPACK

indicator light is off.

Entering a lbs/for quantity. The unit price must be less than $100. Scale must be set for U.S. pounds.

Entering a unit price over A By Weight item cannot be programmed to allow a Unit Price over $99.99

$ 99.99. and also have multiple pounds pricing with

lbs/For

greater than 1. However,

a By Count item can be priced over $ 99.99.

Override of a non-zero Tare. If weight is on the platter, press

, enter the new tare, and press

again.

Accumulating items. – Verify that the weight on the platter is stable and Net Wt ≥ 20 x division.

– Only items that have a total price can be accumulated.

– If the accumulator item limit (60,000 items) is exceeded or if the total value

is more than 9999.99, clear the accumulator before continuing.

Clearing the accumulator. The accumulator can only be cleared when it is shown on the display. Press

to display the accumulator total and then press

to clear the total.

Displaying a PLU. After a PLU number is entered, if the display shows zeroes, the PLU has not

been programmed. To enter PLU Edit Mode and program this PLU, enter the

PLU number and press

PLU

TWICE. The PROG light is on. Enter the

appropriate values.

Accessing By Count PLUs. To access a By Count PLU, make sure there is no weight on the platter.

To change a By Count PLU to In PLU Edit Mode, press

and then press

Pcs

. Enter the other required

By Weight. By Weight values as described previously.

SERVICE

If the scale does not function as described, or TROUBLESHOOTING does not resolve the problem,

contact your local Hobart Service Office for re-calibration, service, or repair.

– 16 –

REPLACEMENT PARTS

PL-52685

WEIGHT/COUNT

CAPACITY

TARE ZERO NET lb k g

FOR

PREPACK

100g FOR

PROG ACCUM TOTAL

PLU/EDIT BY COUNT TARE PRICE PRINT/ACCUM

CLEAR lb 100 g PREPACK REZERO PRINT/TOTAL

30 X .01 lb

UNIT PRICE $

TOTAL PRICE $

890

Pcs

100g

lb/for

PLU

56-7-8

25-24

SCALE

ILLUS. PART

PL-52685 NO. NAME OF PART AMT.

1 00-043110 Platter ...........................................................................................................................................1

2 00-043108 Cover ............................................................................................................................................ 1

3 00-046865 Screen-Operator Display (English, LB/KG) ..................................................................................1

4 00-043166 Spacer - Conductive.....................................................................................................................1

5 00-043120 Cover - Printer Card .....................................................................................................................1

6 00-043164 Standoff - Grounding ....................................................................................................................4

7 SC-018-77 Mach. Screw 6-32 x 5⁄16 Phil Pan Hd.............................................................................................8

8 WL-008-01 Lockwasher 6 Internal Shakeproof ...............................................................................................8

9 00-043182 Base .............................................................................................................................................1

10 00-043117 Keypad (English) ..........................................................................................................................1

11 00-043111 Support - Keypad .........................................................................................................................1

12 00-043147 Retainer ........................................................................................................................................ 2

13 00-043112 Level ............................................................................................................................................. 1

14 00-046448 Control Board Assy. .....................................................................................................................1

15 00-042426 Loadcell ........................................................................................................................................ 1

16 00-043116 Support - PCB ..............................................................................................................................2

17 00-043170 Power Jack Assy. .........................................................................................................................1

18 00-046458 Power Supply (115 VAC) .............................................................................................................1

19 00-043125 Foot .............................................................................................................................................. 4

20 NS-017-03 Jam Nut 1⁄4-20 Hex........................................................................................................................4

21 SC-089-02 Cap Screw 1⁄4-20 x 3⁄4 Socket Fil. Hd. ............................................................................................4

22 00-043103 Plate - Platter Support ..................................................................................................................1

23 00-043102 Support - Platter ...........................................................................................................................3

24 SC-118-20 Cap Screw 1⁄4-20 x 1⁄2 Hex Hd. ......................................................................................................4

25 WL-003-38 Lockwasher 1⁄4 Medium................................................................................................................. 4

26 00-047321 Screen-Customer Display (English, LB/KG).................................................................................1

00-047358 Kit-Elevated Display Assy. ...........................................................................................................1

00-182307 Kit-Platter Rail ..............................................................................................................................1

00-043206 Kit-Fish Pan..................................................................................................................................1

00-047099 Cover-5 Pack (Ameri Scale).........................................................................................................1

00-043100 Security Plate ...............................................................................................................................1

00-043149 Cord-Power (120VDC)(20') ..........................................................................................................1

00-044149 Extractor-Surface Mount I.C.........................................................................................................1

– 17 –

FORM 33836 (4/97) PRINTED IN U.S.A.

DISPLAY UNIT

ILLUS. PART

PL-52684 NO. NAME OF PART AMT.

1 00-046431 Housing-Display...........................................................................................................................1

2 00-046426 Screen-Display.............................................................................................................................1

3 00-046855 Screen-Display (Operator)...........................................................................................................1

4 00-046450 Board Assy.-Numeric Display......................................................................................................1

5 SC-022-07 Mach. Screw 8-32 x 1⁄2 Flat Hd. ................................................................................................... 2

6 SD-017-06 Self-Tapping Screw 6-20 x 1⁄2 Binding Hd., Type AB ..................................................................4

7 00-047357 Support-Display Post ...................................................................................................................1

8 SC-113-29 Cap Screw 1⁄4-20 x 7⁄8 Socket Hd. ................................................................................................1

9 00-046615 Cable-Display...............................................................................................................................1

10 00-047333 Bar-Draw Down............................................................................................................................ 1

11 SC-115-35 Mach. Screw 8-32 x 1⁄2 Flat Hd. ................................................................................................... 2

12 SC-018-24 Mach. Screw 6-32 x 3⁄4 Phil. Pan Hd............................................................................................1

13 SD-038-16 Self-Tapping Screw 6-32 x 3⁄8 Hex Washer Hd., Type RL ..........................................................1

14 00-259232 Post - Display (8") ........................................................................................................................1

15 00-259454 Insulator - Post.............................................................................................................................1

00-464811 Cover-Cable .................................................................................................................................1

00-046819 Label-U.L. .................................................................................................................................... 1

00-047358 Kit-Elevated Display Assy............................................................................................................1

12-13-14

10-11

15 6

PL-52684

REPLACEMENT PARTS