IMPORTANT:
• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.
• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!
• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!
FINISHING THE INSTALLATION
5.Placebackplate(F)overmountingstrap(B)sothatmountingscrews(A)protrudethroughtheholesinbackplate(F).Securethe
backplatetothemountingstrapwithdecorativenuts(H).Twistuntilthebackplateofthextureissnugagainstthewall.
6.
Installlightbulbs(N-notprovided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommended
wattage.
7.Loosenthumbscrew(G).Raisethelid(I).Slightlytilttheglassshade(M)alongwithdecorativecap(L)ontop.Carefullypass
glassshade(M)anddecorativecap(L)upoverbulbandsocket(K)tositonbracket(J).Straightendecorativecap(L)andglass
shade(M)tositonbracket(J).Lowerlid(I)ontocap(L)andsecureinplacewiththumbscrew(G).Checkthateverythingislevel
andmakeadjustmentsifneeded.
Yourinstallationiscomplete.Turnonthepowerandtestthexture.
For Customer Service, please
contact the place of purchase.
AssemblyInstructions:3218-BA3 & 3219-BA3 (Dixon)
CLEANING TIPS
Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the
xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.
PREPARING FOR INSTALLATION
Removeallofthecontentsfromthecarton.See
theimportantnotesabove.Shutoffthepowerat
thecircuitbreakerandcompletelyremovetheold
xturefromthewall,includingtheoldmounting
strap.
1.Mountingstrap(B)containsseveralpairsof
threadedholesandtwoofmountingscrews(A).
Youmayneedtotightenhexnuts(C)thatholdthe
screwsinplace.
2.Placemountingstrap(B)uptoyourjunctionbox.
Placebackplate(F)overthemountingstraplining
upmountingscrews(A)withtheholesinbackplate
(F).Thiswillallowyoutoensurethatyouare
hangingthexturestraight.
3.Pullthehousewiresthroughthecenterof
mountingstrap(B).Securemountingstrap(B)to
thejunctionboxwithmountingscrews(D)anda
screwdriver.Tightenthescrewssecurely.
CONNECTING THE WIRES
4.Attachthexture’swirestothepowersupply
wiresfromthejunctionbox.Connectblacktoblack
(orsmooth);whitetowhite(orribbed);groundto
ground(greenorcopper).Twisttheendsofthe
wirepairstogether,thentwistonawireconnector.
Makesurealltwistsareinthesamedirection.If
thereisnogroundwire(greenorcopper)fromthe
junctionbox,locategroundscrew(E)onmounting
strap(B)andwrapthexture’sgroundwirearound
thegreengroundscrew(E).Useascrewdriverto
securegroundscrew(E)ontothemountingbracket.
Tuckallwiresneatlyintothejunctionbox.
House Wires
Fixture Wires
Hot
How to Identify the Fixture’s Wires
Hot Neutral Ground
Smooth
Ribbed
Bare Metal,
Green, or
Green Inner
Thread
Black
White
Black Inner
Thread
White Inner
Thread
JUNCTION
BOX