Legrand MRDS10 Touchscreen Quick Start Quick start guide

Brand: Legrand

Model: MRDS10 Touchscreen Quick Start

Type: Quick start guide

This manual is also suitable for

Legrand Miro MRDS10

Application Assistance

The wire le s s network may co n t ain a variety of wire le s s

d ev i ces. Instructions for installation, binding opera t i o n s ,

and use are included with the re l evant wire l e s s dev i ce s .

A p p l i c ation support information and installation guides fo r

Watt Sto p p e r / L e g r and wire l e s s network dev i ces are

a va i l a b le at www. w a t t s to p p e r. com. Comple t e the physica l

i n stallation and binding of all other wire l e ss dev i ces in the

n e t wor k befo re co n ﬁguring the to u c h s c reen.

Scene Binding

Bind other wire le s s dev i c es in the system to appro p r i a te

g r oups and rooms befo re you attempt to exe c u t e sce n e s

f r om the MRDS10. Use an appro p r i a t e scene co n t r o l le r ,

s c ene re m o te or a MR232 and a PC running a te r m i n a l

e m u l a tor to setup and re c o rd scenes. Once re co r ded, the

MRDS10 can be included in groups and sce n e s .

C r eating new scenes using the MRDS10 To u c h s c r een is

b eyond the scope of this guide. Once you are familiar with

the basic operations described in this guide, you can use

the help screens to learn how to cre a te new sce n e s .

MIRO TOUCHSCREEN SETUP INSTRUCTIONS

B e f o re pro c eeding please read the fo l low i n g :

• All screen setups must be initiated from the

H O M E PAGE using the to o l b ox icon.

• To setup your screen fo l low the instructions give n

h e r e along with the prompts that are given on the

to u c h s c reen.

• Remember to use the help scre e n s .

• U n l e ss sta ted otherwise, these instructions ass u m e

that the Miro system is co n ﬁg u red befo r e setting up

the to u c h s c r een.

DESCRIPTION

The MRDS10 To u c h s c re e n is a combination room and house

level scene co n t ro l l er with the capacity to also co n t r ol up to

30 individual dev i ce groups. The menus and co n t rol functions

a re acce s sed by touching the labels and icons that appear on

the scre e n .

The to u c h s c reen has a help system built into

each page. To acce ss help for a particular page,

p re s s the question mark button at the top of

the page.

Setup Screen

A to o l b ox icon appears on the HOME PAGE. Use

the to o l b ox icon to acce ss the setup scre e n s .

Status LED Indicator & Wake-up Button

The MRDS10 also uses a multi-co lor LED (gre e n / a m b e r / r e d )

to indica te dev i ce status. Dire c t l y below the LED there is a

s i n g l e push-button. Momenta r i ly pre ss this button to wake

up the to u c h s c reen when in power save mode.

The LED can display one of three co lo rs: green, ye l low

(amber, a combination of red and green), or red. The co lo r

can be co n s tant, or can ﬂash at one of three ra t es to

d i s tinguish re p o r ted conditions. To determine the ﬂash ra t e ,

count the number of ﬂashes in 5 seco n d s :

5 ﬂa s h e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Hz

10 ﬂa s h e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Hz

15 ﬂa s h e s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Hz

MRDS10 LED Indications are as fo l low s :

C o l o r B e h a v i o r M e a n i n g

n o n e O f f D e v i c e is not powe red or is in “sle e p ”

m o d e .

G r e e n On, not ﬂa s h i n g D e v i c e is powe red, has a house ID,

o p e rating normally.

G r e e n Flashing @ 2 Hz During binding, dev i c e is excluded, but

can be added.

A m b e r On, not ﬂa s h i n g D e v i c e does not have a house ID.

A m b e r Flashing @ 2 Hz D e v i c e is part of a binding pro c e s s, either

G r oup or Room. Binding was sta r ted by

some other dev i c e and must be sto p p e d

on the other dev i ce .

A m b e r Flashing @ 3 Hz D e v i c e is the master of a binding pro c e ss .

Binding was sta r ted on this dev i c e and

m u s t stop on this dev i c e .

R e d Flashing @ 2 Hz D e v i c e has enco u n te r ed an erro r. An

i n v alid command was atte m p te d .

Caution: Battery Vo l tage is Low ~ 10s

every 1-2 minute s

R e d Flashing 3 Hz Shutting down To u c h s c reen due to low

b a t t ery co n d i t i o n

M R D S 1 0

W i re l e ss To u c h s c reen Contro l l e r

SET HOUSE ID IN THE TOUCHSCREEN

All wire le s s dev i ces insta l l ed in the same system must acquire the

same unique House ID befo re use.

1 . M a ke sure all dev i c es are insta l led and energized and all gro u p ,

house, and room bindings are co m p le te. Make sure that eve r y

other wire l e ss dev i ce LED is green and the MRDS10 status LED is

ye l low (amber).

2 . P re s s on any p rev i o u s ly bound d e v i c e until its LED ﬂa s h e s

amber (about 2 seco n d s ) .

3 . Verify that the LED on the MRDS10 starts ﬂashing green. This

co n ﬁrm s that House ID m a t ches the other dev i ces in the house.

4 . Return to the same prev i o u s ly bound d ev i c e used in step 2 and

p re s s until its LED changes to solid green (about 2 seco n d s ) .

All dev i ce LEDs including the MRDS10 should now be solid gre e n .

BIND GROUPS

A group can be one dev i c e, or seve ral dev i ces anywhere in the house

that are bound together and co n t r o l led in unison. That is, for ex a m p l e ,

if you dim any dev i c e in the group, all dev i ces in the group will dim

s i m u l t a n e o u s ly. A dev i c e can only be bound to one group identity.

When you bind a group (co n taining one dev i c e, or many dev i c es) to a

g roup label on the to u c h s c reen, you can co n t r ol the group from the

to u c h s c reen.

1. D e t ermine which dev i c es you want to co n t rol from the scre e n .

M a ke sure that you know which dev i c es are already bound to each

other as a group. This will help you decide on a name for the

g roup, to be ente red as a label on the scre e n .

2 . Go to the ﬁrst group and put one of the dev i ces into learn mode

( p re s s on the dev i ce until its LED starts blinking). All dev i c e s

that are curre n t l y included in this group blink amber.

3 . The screen displays a message “External Group Binding in

P ro g r e ss ...”. Read the message then pre ss OK. Notice the co l o r

of the scre e n ’s blinking LED. If it is green, it can be included in the

g roup. If it is amber, it is already included in the group where yo u

i n i t i a t ed the learn mode.

4 . When the GROUP SETUP 1-5 page appears, pre ss the ve r t i cal bar

a b o ve the GROUP number that you want to pro g ram (typica l l y yo u

would start with Group 1).

5. The screen changes to the INDIVIDUAL GROUP SETUP page.

P re s s the Edit Label icon to give the group a meaningful label.

6. The screen changes to the EDIT LABEL SETUP page. Use the

key b o a rd to enter the group name label and pre s s SAVE.

7 . P re s s (+/-) to pro c eed (LED will continue to ﬂash gre e n ) .

8 . The screen displays a message “Group Binding A

I n c l u d e / E x clude.” Read the message then pre ss the

b u t ton to

include the to u c h s c reen in the current group. The screen LED

ﬂashes amber to indica t e it is included in the gro u p .

9. C lose binding from the dev i c e where you sta r ted in step 2. Te s t

the group operation from the scre e n .

Repeat the above pro c e d u re for up to 30 succe ss i ve groups and their

a s s o c i a t ed labels.

Label Names – Eight chara c t e rs can display on a single line with a

limit of two lines. To display co m p le t e wo rds of eight chara c t e rs

or le s s per line, include a space between the wo rds, ie. :

“LIVINGRO” displays if “LIVINGROOM” is typed in the label box .

“LIVING ROOM” displays if a space is inserted between “LIVING”

and “ROOM”.

GROUP SETUP 1-5

INDIVIDUAL GROUP

SETUP Edit Label

EDIT LABEL SETUP

Group Binding “Proceed”

2.4

2.5

2.6

2.3

Group Binding A

Include/Exclude

2.8

INDIVIDUAL GROUP

SETUP Include/Exclude

2.7

page 2

ROOM SETUP

A to u c h s c reen can only be bound to one room.

1. Choose an ex i s ting room co n t ro l l er that you want to ass o c i a te

with the to u c h s c r een. Put the room co n t ro l l er into the le a r n

mode (pre ss on the dev i c e until its LED starts blinking).

2. S c reen LED ﬂashes green and the External Room Binding In

P ro c e s s screen appears. Pre s s OK to pro c eed.

3. P re s s

to include the to u c h s c reen in the room. The

to u c h s c reen LED starts ﬂashing ye l low (amber).

4. C lose the binding from the room co n t ro l l er where you sta r te d

the binding (step 1).

5. The screen returns to the HOME PAGE. If you have alre a d y

c re a ted scenes from the ex i sting room co n t ro l l er, you ca n

n o w re c all them from the to u c h s c r een.

Label the Scenes

6 . To edit the to u c h s c reen labels for the scenes, pre ss the setup

i con. This ta kes you to SETUP MENU PAGE 1. Pre s s the

Room Setup ico n .

7 . The screen changes to ROOM SCENES 1-5 SETUP. Pre ss

room scene button 1.

8 . P re s s Edit Label.

9 . The screen changes to the EDIT LABEL SETUP page (similar

to Figure 2.6). Use the key b o a r d to enter the scene label and

p re s s SAVE.

10. To adva n ce to the next scene, pre ss the a r row on the

INDIVIDUAL ROOM SCENE SETUP page. You can label up to

15 room sce n e s .

N o te s :

• To cre a te new scenes, select the light levels that you want to

re call and then pre ss and hold the Reca l l / R e c o rd icon until

the LED ﬂashes green and the screen beeps (approx i m a t e ly 2

s e c onds).

• You can also initiate the room setup pro c e s s dire c t ly from the

to u c h s c reen by using the instructions above along with the

p rompts and the help screens.

HOUSE SETUP

If you have already cre a ted house scenes, they are auto m a t i ca l l y

included in the to u c h s c reen when you assign a house ID.

T h e re fo re, all you need to do is to label the scenes using the Edit

Label function in the INDIVIDUAL H O U S E S C E N E SETUP MENU.

You can also cre a te scenes dire c t ly from the to u c h s c reen as

fo l low s :

1 . E n ter SETUP M E N U PAGE 1.

2 . P re s s the House Setup icon.

3. P re s s the desired house scene label.

4 . Rename the house scene by pre ssing the Edit Label icon and

then labeling the scene as described in step 3.9 above .

External Room Binding in

Process Pop-up

External Room Binding A

Include/Exclude

SETUP MENU PAGE 1

ROOM SCENES 1-5 SETUP

INDIVIDUAL ROOM SCENE

SETUP

3.2

3.3

3.6

3.7

3.8

page 3

2800 De La Cruz Bouleva rd, Santa Clara, CA 95050

Te c h n i cal Support: 800.879.8585 • 972.578.1699

w w w. w a t t s to p p e r. c om

07216r1 4/2005

TROUBLESHOOTING

During Set House ID, the LED is not ﬂashing on some Wire l e s s

d ev i ce s .

• If LED is solid green befo r e initiating house ID binding:

The dev i c e already has another house ID. Reset it to the

fa c tory default so that it can be bound to the desired house

ID. Resetting to fa c t ory defaults is described in the “I need to

start over” iss u e .

• If LED is solid amber after initiating house ID binding:

The dev i c e may be out of range of the initiating dev i c e. It may

be nece ssary to add a MRR2 Repeater if re c eption to a

particular area of the house is blo c k e d .

I need to start ove r.

You can reset any wire l e s s dev i c e EXCEPT the MRDS10 to

fa c tory default settings by pre ssing and holding until the

LED changes to solid amber (approx i m a te l y 10 seco n d s ) .

During the pro ce s s, the LED ﬂashes amber and when

co m p le t e, it changes to solid amber. The dev i ce can then be

re co n ﬁ g u red, ex a c t l y like any new dev i c e .

I need to set the MRDS10 To u c h s c r een to Fa c tory Defa u l t s

This will erase all binding, scene and labeling info r m a t i o n

f r om the to u c h s c re e n .

1. From the Home Page, pre ss the setup icon .

2. P r e ss Lock/Reset Setup icon .

3. Touch the box next to Reset Display.

4. Touch the YES box next to RESET TO FACTORY DEFA U LT

S E T T I N G S .

5. The to u c h s c r een will reset to Fa c tory Default Settings and

you may pro ceed with “SET HOUSE ID.”

See the instructions on the MRDS10 Setup screen for more

i n f o r m a t i o n .

Record a New House Scene

1 . To re c o rd a new scene you must ﬁrst select which dev i c e s

you want bound to the scene (re f er to the instruction manual

or the instructions that came with your house level co n t ro l l e r

for an explanation).

2 . To start a binding from the scre e n :

a . P re s s the scene button that you want and pre ss the bind

i co n .

b . P l a c e the dev i c es you want to include in the scene in the

learn mode (Dev i ce LED Flashing Amber).

c . C lose the binding from the screen by pre ssing OK.

d . To re c o rd scene lighting levels, set pre fe r r ed light leve l s

and then pre s s and hold the re c a l l / re c o rd button ico n

until the LED ﬂashes green and the screen beeps

( a p p rox i m a t e ly 2 seco n d s ) .

N o te s :

At the house level, all dev i ces are bound by default to scene ﬁve

and All House Off. Any dev i c e that you want included in other

s c enes (i.e., 2 through 10 and House On), must be bound to the

s c ene befo r e they can be co n t ro l l ed by the scene.

HOME PAGE SETUP

By default your Home Page is set to display house scenes 1 to 3

on the top row and room scenes 1 to 3 on the second row. Fo l low

the instructions on the HOME PAGE BUTTON SETUP to change

h o w your Home Page appears.

DEFAULT PAGE SETUP

You have a choice of having the Default Page (the page that

a p p e a r s after two minutes of inactivity) of being any of the

fo l lowing: a) Home Page, b) House Scenes, c) Room Scenes, or

d ) G roups. Fo l l ow the instructions on the screen.

SYSTEM LOCK

To lock your system from the screen fo l low the instructions on the

Lock/Reset Setup button. If you fo rget your pass wo rd ente r

“9999” to enter the SETUP MENU and reset your pass wo r d .

ADDITIONAL FUNCTIONS

For additional functions go to the second page of the SETUP

s c reen by scrolling fo r w a rd f rom SETUP MENU PAGE 1.

On the second setup page you will see the options fo r :

• Pa s s wo rd Setup

• Power Save Setup

• Time Setup

• C o n t ra s t/Backlight Setup

Legrand MRDS10 Touchscreen Quick Start Quick start guide

Brand: Legrand

Model: MRDS10 Touchscreen Quick Start

Type: Quick start guide

This manual is also suitable for

Legrand Miro MRDS10

Download PDF

report

Legrand MRDS10 Touchscreen Quick Start Quick start guide

This manual is also suitable for

Legrand MRDS10 Touchscreen Quick Start Quick start guide

Related papers

Other documents