Toro KIT-PANEL, SWITCH MOUNT User manual

 NOTE: Read these installation instructions thoroughly before beginning the installation process. Retain

these Installation Instructions for future reference.

Arctic Cat

OHUV

Installation Instructions - Accessory Kit

Form No. 0453-436

Panel Switch Mount Kit

(p/n 1436-008)

Application:

2007 Prowler

Kit includes:

p/n QTY DESCRIPTION

0409-069 1 Panel Switch Mount

0409-070 2 Switch Hole Plug

0453-436 1 Instructions

1. Cut out Panel Template 0742-214.

2. Cut out the shaded area on the template.

3. Place the left edge of the template flush with the

right side of the existing main switch panel on the

dash; then trace the rectangular cut-out area onto

the dash.

4. Remove the template; then using a router bit, cut

out the marked area on the dash.

5. Insert Switch Panel (p/n 0409-069) into the

mounting hole location making sure it is com-

pletely seated.

6. Insert Plugs (p/n 0409-070) into the unused switch

panel holes.

Template 0742-214

Printed in the U.S.A. ®™Trademarks of Arctic Cat Inc., Thief River Falls, MN 56701 1006