Shine Company 4617DB Operating instructions

Shine Company
Brand
Shine Company
Model
4617DB
Type
Operating instructions
1 PC Short
Machine Thread
(6 x 50 m/m)
& 1 Nut
1 PC Short
Machine Thread
(6 x 50 m/m) & 1 Nut
Seat
A
Front Leg
B
Rear Armrest
Support
C
Arm Rest
D
E
Back Rest
8 PC
Short
Machine
Thread
(6 x 50 m/m)
4 PC
Lag Bolts
(6 x 60 m/m)
4 PC
Wood
Screws
(3.5 x 40 m/m)
4 PC
Barrels
10 PC
Nuts
PARTS INCLUDED:
2 PC
Long
Machine
Thread
(6 x 60 m/m)
Step 2:
Place Seat in upright position.
Screw Rear Armrest Support with
one Short Machine Thread (6 x 50 m/m)
and one Nut to Seat so that it is
perpendicular to the floor.
Repeat on the other side.
NOTE: Lightly screw the bolts of
Rear Armrest Support to properly
attach to Armrest in the next step.
A
C
A
C
D
ITEM# 4617 - How To Assemble Your Adirondack Chair
TOOLS NEEDED: Philips screwdriver, power drill optional
CAUTION: When assembling chair, DO NOT completely tighten the bolts and nuts until all the parts
& holes are properly aligned.
Step 1:
Place Seat on its side and
screw Front Leg with three
Short Machine Thread (6 x 50 m/m)
and three Nuts.
Repeat on the other side.
A
B
3 PC Short
Machine Thread
(6 x 50 m/m)
& 3 Nuts
3 PC Short
Machine Thread
(6 x 50 m/m)
& 3 Nuts
(REV. 9/2016)
  • Page 1 1
  • Page 2 2

Shine Company 4617DB Operating instructions

Shine Company
Brand
Shine Company
Model
4617DB
Type
Operating instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents