Gianni Industries GK236M Installation guide

Brand: Gianni Industries

Model: GK236M

Type: Installation guide

42.5

5.74

662

082

2.1. 3. 4.

Measure latch position.

Monitoring Output: Lock status

Current Draw: 280mA/12VDC, 140mA/24VDC

Operating Temperature: -10~+45ºC

Operating Voltage: 12 or 24VDC

Mark latch position on the frame.

GK236M Series Electric Strike Installation Instructions

(For Wood Doors)

Humidity: 0~95% non-condensing

NO.

COM.

NC.

Lock Status Output

N.C. contact output: unlocked status

N.O. contact output: locked status

Power

Input

Control Device

(e.g. Reader)

Drill and cut the frame. Connect the wires and install the

strike.

Lock Mode: Fail-safe

Latch Throw: 11mm

Keeper Width: 48mm

Solenoid Testing: Over 250,000 cycles

Unit: mm

Static Stength: 1500 lbs.

Preload: Up to 500 lbs.

Net Weight: 645g

Installation Steps

Specifications

Handing Guide

Keeper Adjustment

Construction: Stainless steel

The strike keeper can be adjusted horizontally to account for various installation

anomalies. To adjust the keeper, loosen the adjustment screws, move the keeper

horizontally as needed, and retighten the adjustment screws.

(Maximum adjustable range: 3mm)

Adjustment

Screws

Strike

Keeper

Strike

Keeper

Adjustment

Screws

Door handing is determined from the side of the door where

the hinges are visible, according to the German standard DIN

107.

Stand facing the door on the hinge / pull side. If the hinge is on the

right, the door is considered to be DIN right. If the hinge is on the

left, then the door is considered to be DIN left.

DIN left DIN right

Chisel

Models

DIN left DIN right

GK236M-L-PL-12 GK236M-R-PL-12

GK236M-L-PL-24 GK236M-R-PL-24

Gianni Industries GK236M Installation guide

Gianni Industries GK236M Installation guide

Gianni Industries GK236M Installation guide

Related papers

Other documents