PACKAGE CONTENTS
INSTRUCTION SHEET IS TFX837-
STYLE NUMBER TFX837Y:
ISSUED 08 2009-
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Part
A
C
B
Description
Socket Assembly
Frog
T7 Bulb
Quantity
1pc
1pc
1pc
A
CAUTIONS
!
PREPARATION
ASSEMBLY
These instructions are provided for your safety. It is very important that they are read completely before
the installation of your fixture. We strongly recommend that a professional electrician install the fixture.
Disconnect fixture from the power source before replacing the bulb(s), making sure the bulb(s) had
sufficient time to cool down. DO NOT subject the lamp to any shock while lit as shattering of lamp may
result.
●
●
Before beginning installation of product, make sure all parts are present. Compare parts with package
contents list and diagram above. If any part is missing or damaged, do not attempt to assemble, install or
operate the product. Contact customer service for replacement part.
Estimated Assembly Time : 20 30 minutes
Tools Required for Assembly (not included) : (1) 15W T7 Cand Base Bulb.
●
●
●
-
C
B
C
STEP 1:
a. Install the T7 Bulb referring to fixture markings and/or
labels for maximum wattage.
b. Place the Socket with Bulb inside of the Center Hole on the
bottom of the Frog (Refer to Bottom View). The Spring Tabs
on the Socket will engage the Socket after assembly.
Your assembly is completed now. Keep this sheet for future reference.
Bottom View
Frog
T7 Bulb
Socket
Spring
Tab
Center Hole
Revised 2014-06-04
/
