First Alert Smartbridge 16 Channel User manual

Type
User manual
SmartBridge MAC software
V 1.0.1
1. Download the SmartBridge software from the MAC app store.
2. Once downloaded launch the app.
3. Click Edit and select “Add SmartBridge ID
4. In the following window add the following credentials
Device ID: This will be the Smartbridge ID number
User Name: Enter the user name of the DVR (network user name on the DVR)
Password: Password of the DVR (network user password on the DVR)
Group: Add a name for the DVR. For Example: Home, Work, Ext.
Click OK when completed.
You will now be connected to your cameras
Smartbridge Help Link: Will re-direct you to www.firstalert.com
About Smartbridge: Gives you the version number
Preferences: This will allow you to change the default location to save your Snapshots
Hide SmartBridge: This will allow you to minimize the software.
Views: Will let you choose between 4,8,9,16,24 cameras
Link and connect all camera(s)
Disconnect all camera(s)
Take screenshot of currently selected channel
PTZ controls
Iris: Adjust the Iris of the PTZ camera
Focus: Adjust the Focus of the PTZ camera
Zoom: Zoom in and out of the PTZ camera
  • Page 1 1
  • Page 2 2

First Alert Smartbridge 16 Channel User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI