Sitecom WLE-1000INT Installation guide

Installation guide

WLE-1000INT_QIG_20131127.indd 1-2 09-01-14 16:13

Package content

1x SmartBridge 1x Power adapter

1x Network cable

Sitecom and NET2GRID

Many energy suppliers o er a way to gain insights into your energy use.

We believe that you don’t have to be tied to a supplier to gain insights

into your energy use.

NET2GRID provides an easy solution to measure and monitor your home’s

energy consumption. That’s why we have partnered up with them.

home energy

monitor

1x SmartBridge

1x Micro USB cable

Starter Pack

2x SmartPlugs

EN

WLE-1000INT_QIG_20131127.indd 3-4 09-01-14 16:13

Network port

P1 SmartMeter

port

Power

SmartPlug LED

SmartPlug Pairing

and On/O button

LED ring

SmartBridge SmartPlug

• Pairing mode: LED blinking red/green, ready to connect to smartbridge.

• Smartplug ON: LED is solid green / Smartplug OFF: LED is o.

EN

WLE-1000INT_QIG_20131127.indd 5-6 09-01-14 16:13

Before you start

Write down the SmartBridge ID

Top Bottom

NET2GRID

SMARTBRIDGE ID

MAC ADDRESS

XXX

XX:XX:XX:XX:XX:XX

QR

CODE

QR

CODE

SmartBridge SmartBridge

EN

WLE-1000INT_QIG_20131127.indd 7-8 09-01-14 16:13

Install the SmartBridge

& SmartPlugs

1

Plug the SmartPlugs into a power socket.

• Make sure to use power sockets close to the (modem) router for installation.

• After successful installation you can move the SmartPlugs anywhere in your house.

Check if the SmartPlug LEDs are green.

If not press the button to turn on the SmartPlug.

!

EN

WLE-1000INT_QIG_20131127.indd 9-10 09-01-14 16:13

3

WAN LAN LAN LAN LAN

(modem) router

SmartBridge

LAN

Connect the SmartBridge to your (modem) router with the supplied

network cable.

2

Push the button on each of the two SmartPlugs for 5 seconds until

the LED starts to blink green and red.

press

5 sec.

press

5 sec.

EN

WLE-1000INT_QIG_20131127.indd 11-12 09-01-14 16:13

4

WAN LAN LAN LAN

Connect the micro USB cable to the SmartBridge and to the USB

power adapter and plug the power adapter into a wall socket.

5

When the LED’s turn solid blue your SmartBridge has been installed.

EN

WLE-1000INT_QIG_20131127.indd 13-14 09-01-14 16:14

6

Check that the LEDs of the SmartPlugs have turned solid green.

• Now you can move the SmartPlugs and plug in the devices you would like to measure.

• The button can now be used to turn the plugs on and o .

EN

WLE-1000INT_QIG_20131127.indd 15-16 09-01-14 16:14

Registration with NET2GRID

2

1

Download the free NET2GRID Energy Insight app from the

App Store or Google Play.

EN

WLE-1000INT_QIG_20131127.indd 17-18 09-01-14 16:14

2 3

Open the app and click on “Register” on the start screen. Fill in the registration form including the SmartBridge ID that you

documented earlier.

iOSiOS AndroidAndroid

EN

WLE-1000INT_QIG_20131127.indd 19-20 09-01-14 16:14

4

Check your e-mail account and write down the supplied username

and password.

• Make sure to check your spam-folder if you can’t  nd the e-mail.

EN

WLE-1000INT_QIG_20131127.indd 21-22 09-01-14 16:14

a. Open the NET2GRID Energy Insight app & login with the username and

password that you received in your e-mail.

Monitor and measure

the energy consumption

3

iOS Android

EN

WLE-1000INT_QIG_20131127.indd 23-24 09-01-14 16:14

At home

(free)

Anywhere*

(3 EUR/month)

X

See how much electricity your connected devices use in real-time

Turn connected devices on/o

*To buy the subscription, go to

https://store.net2grid.com

Schedule on and o -times for connected devices

See how much electricity your connected devices

have used in the past

Access to web portal from any computer

(https://my.net2grid.com)

X

Gain even more insight into your energy consumption.

Access to web portal from any computer

b. Select the desired SmartPlug and monitor the energy consumption.

iOS Android

EN

WLE-1000INT_QIG_20131127.indd 25-26 09-01-14 16:14

Page is loading ...

Vor dem Start

Notieren Sie die SmartBridge-ID

Oberseite

Unterseite

NET2GRID

SMARTBRIDGE ID

MAC ADDRESS

XXX

XX:XX:XX:XX:XX:XX

QR

CODE

QR

CODE

SmartBridge SmartBridge

DE

WLE-1000INT_QIG_20131127.indd 31-32 09-01-14 16:14

Page is loading ...

Prima di iniziare

Prendi nota dell’ID di SmartBridge

Lato superiore Lato inferiore

NET2GRID

SMARTBRIDGE ID

MAC ADDRESS

XXX

XX:XX:XX:XX:XX:XX

QR

CODE

QR

CODE

SmartBridge SmartBridge

IT

WLE-1000INT_QIG_20131127.indd 55-56 09-01-14 16:14

Page is loading ...

ES

Antes de comenzar

Anote el ID de SmartBridge

Parte superior Parte inferior

NET2GRID

SMARTBRIDGE ID

MAC ADDRESS

XXX

XX:XX:XX:XX:XX:XX

QR

CODE

QR

CODE

SmartBridge SmartBridge

WLE-1000INT_QIG_20131127.indd 79-80 09-01-14 16:15

Page is loading ...

www.sitecom.com/helpdesk

WLE-1000INT_QIG_20131127.indd 99-100 09-01-14 16:15

Sitecom WLE-1000INT Installation guide

Sitecom WLE-1000INT Installation guide

in other languages

Related papers

Other documents