Page is loading ...
Model: XAM300H
Intercom Handset for
XAM300
CCTV
CCTV
Model:
XAM300H
Intercom Handset for XAM300
Manufactured exclusively for:
Xvision (Europe) Group,
Head Office: London, U.K.
Email: [email protected].uk
Web: www.x-vision.co.uk
TECHNICAL SUPPORT:
For Technical Support for any Xvision product please contact your local
distributor.
LIMITED WARRANTY:
This product is supplied with a 1 Year warranty. The Warranty excludes
products that have been misused, (including accidental damage) and
damage caused by normal wear and tear. In the unlikely event that you
encounter a problem with this product, it should be returned to the
place of purchase.
Before you begin
• Please unpack the box carefully and identify that all the parts are present.
• Do not cut the cables, this will void the warranty.
• Make sure you use only the recommended power supply. Damage caused to the unit by
incorrect voltage or wiring is not covered by the warranty.
Thank you for purchasing this Xvision Handset. Before operating this
product, please read this instruction manual carefully.
The XAM300H Video Door Entry Intercom Handset is designed for use
in conjunction with the XAM300 Entry Phone Monitor.
Two way audio facility allows you to communicate with visitors
Remote unlock function allows you to open the door
Surface mount fitting
3. Features
1. Safety Precautions
2. Product Description
Wiring Diagram
Specifications
Model: XAM300H
Power Source: Provided by B/W Entry Phone
(XAM300)
Installation: 4 wire cabling
Communication Type: Synchronous
Max. Wiring Distance: 50m (165 feet)
(22AWG, 0.65mm 4 wires
Dimensions (WxHxD): 92x222x60mm
XAM300H
Optional Multi
Apartment
Entry Camera
2 7
Note- This handset unit is designed for use with the XAM300
Phone/Monitor and XAM104-116 range of Multi Apartment Entry Cameras.
Other units may be added to expand the system (see Diagrams).
Connection Diagram
8. Wiring
1. When a visitor arrives at the entrance of the apartment they will
press the door bell button that corresponds to the apartment they
wish to visit, the Entrance Panel has an ID panel next to each Door
Bell which will have written on it the apartment number or name.
2. The Entry Phone/Monitor in the corresponding apartment will then
ring and display images of the visitor on its monitor.
3. Pick up the handset to have a 2 way conversation with the caller.
4. Push the Door Release button on the Handset and automatically
allow the caller entry in to the building.
7. Operation
XAM300-1 XAM300-2
XAM300H
Optional Multi
Apartment
Entry Camera
Electronic
Lock
Indirect unlocking
of Electronic Lock
4. Contents
Fixing
Screws
Wall Plugs
Wall Mount
Bracket
XAM300-
Intercom
Handset
5. Controls
Power Indicator
Intercom Button
Door Release Button
Handset
Handset Cord
6 3
6. Installation
4. Attach the handset to the mounting plate by placing the handset
over the bracket hooks and sliding t down. Insert the machine screw
into the hole on the top of the bracket to secure the handset.
5. Connect the handset cord to the connector on the bottom of the
handset
6. Place the handset into the cradle to complete the installation.
1. Choose a suitable location to mount the handset. Drill a hole and
feed the cables through. The handset should be mounted 1.50 to
1.70m from floor level.
2. Fix the mounting plate to the wall, using the screws supplied
(see Fixing Holes Guide).
3. Connect the wires to the connector on the back of the handset.
4 5
/
