Page is loading ...
EN
USER
MANUAL
Maxi Monitor Art. 6813W with Android
TM
2
Table of contents
Warning ............................................................................................ 2
Description of the monitor .............................................................. 3
Function keys............................................................................................3
Activating function keys ..........................................................................3
Key to the indicator LEDs ........................................................................ 3
Configuration Wizard ...................................................................... 4
Using the interface .......................................................................... 5
Switching on the monitor ........................................................................5
Opening the menu .................................................................................... 5
Menu ..........................................................................................................5
Function shortcuts ..................................................................................5
HOME [
] ...........................................................................................6
Third party apps .......................................................................................6
Navigation bar ..........................................................................................6
DOOR ENTRY SYSTEM / CAMERAS [
/ ] ................................... 7
Perform an action on an entry in the directory ...................................7
Scrolling through the directories ......................................................... 8
Customising a directory image ..........................................................8
MESSAGES [
] ..................................................................................9
Viewing a video message ...................................................................9
Saving a video message to SD card ................................................... 9
Deleting a video message ...................................................................9
ACTUATORS / LOCK RELEASE [
/ ] ........................................10
SETTINGS [
] .................................................................................... 11
Managing directories .................................................................... 13
Adding an entry to the Directory ..........................................................13
Deleting an entry in the Directory .........................................................14
Advanced settings [ ] ............................................................ 15
Warning
Comelit Group S.p.A. declines any responsibility for improper use of the apparatus, for any alterations made by others for
any reason or for the use of non-original accessories or materials.
Caution! In order to reduce the risk of faults and electric shocks: do not open the device or carry out any repairs yourself. If
necessary, request the services of qualified personnel. Do not insert objects or pour liquids into the device.
Clean using a damp cloth. Do not use alcohol or other aggressive products.
Comelit Group S.p.A. reserves the right to change the information provided in this manual at any time and without prior
notice.
The manufacturer, Comelit Group S.p.A., hereby declares that the radio equipment art. 6813W conforms to directive
2014/53/EU. The full EU conformity declaration is available at the following web address:
https://pro.comelitgroup.com/en-gb/product/6813W
3
Description of the monitor
Function keys
AUDIO: allows you answer incoming calls.
√ Incoming call:
f Press to start the conversation
f Press again to interrupt the conversation
» It is possible to resume the conversation
with the external unit for as long as the LED
continues to flash.
[programmable]
MANUAL LOCK RELEASE: opens the
corresponding door lock.
LOCK RELEASE AND ACTUATORS: allows
activation of the associated relay.
[programmable]
“SILENT” MODE (Privacy function): the ringtone
will be silenced on receipt of a call from the external
unit and from the switchboard.
DOOR OPENING UPON CALL (Doctor function):
allows automatic operation of the lock-release on
receipt of a call from an external unit.
“SILENT” MODE + DOOR OPENING UPON CALL:
activates both functions.
NONE
[programmable] [Default: none]
MANUAL LOCK RELEASE / NONE / INTERCOM
/ LOCK RELEASE AND ACTUATORS / SELF
ACTIVATION / ALARM
MESSAGE MENU: used to access the video
Messages section
DOORS OPEN: allows access to the External units
section.
Activating function keys
f Touch to activate the function keys
Key to the indicator LEDs
STEADY LED: communicating
STEADY LED (in standby): automatic answer
enabled
FLASHING LED: incoming call
1 FLASH: door open confirmed
FLASHING LED: incoming call
STEADY LED: “silent” mode enabled or door
opening upon call enabled or both enabled
STEADY LED: video memory / call
divert enabled
FLASHING LED: signals the presence of a video
message not yet viewed in the directory
STEADY LED: signals the opening of one or more
doors
21 3
5
4
1. Soft-touch keys
2. Touch screen
3. Microphone
4. Camera
5. Micro SD port
4
Configuration Wizard
1. Select the desired language,
confirm by pressing
Welcome
English
Español
Deutsche
CONTINUE
><
and continue with guided configuration by pressing continue >
Welcome
English
Español
Deutsche
CONTINUE
><
2. Select the Wi-Fi network to which you wish to connect, enter the password, confirm and continue with guided
configuration by pressing continue >
Connect to WiFi network
CONTINUE
><
MY Wi-Fi
Other Wi-Fi_1
Other Wi-Fi_2
Other Wi-Fi_3
3. Set the date and time
• to automatically update the date and time via internet:
Activate "Automatically set Date & Time" and select
your time zone
• to set the device date and time manually:
Deactivate "Automatically set Date & Time" and press the individual
elements to customise them.
continue with guided configuration by pressing continue >
Automatically set Date &Time
Date
2018 - 04-17
Time
16:00
Time zone
(GMT 0:00) Europe/London
Date and Time settings
CONTINUE
><
4. Set the ViP address for the device (8-character alphanumeric ID code provided by your installer) and choose whether you
want to install the monitor as:
• Master unit (main monitor)
• Slave unit (secondary monitor)
Vip address
Primary ViP address
COMPLETE
<
Master
Slave 1
Slave 15
0/8
5. Press "Complete" to complete the configuration process.
5
Using the interface
Switching on the monitor
f Press the screen to switch it on
Comelit
3:56 PM
Monday 23 April
Door entry system
Alerts
000000002
Monday 23 April, 03:10
Lock release and actuators
Entrance
Opening the menu
f To open the navigation menu: press the corresponding icon (A) or drag the left side of the screen towards the right (B).
HOME
3:56 PM
Monday 23 April
Door entry system
Alerts
000000002
Monday 23 April, 03:10
Lock release and actuators
Entrance
Comelit
3:56 PM
Monday 23 April
Door entry system
Alerts
000000002
Monday 23 April, 03:10
Lock release and actuators
Entrance
Comelit
Home
Door Entry Monitor
Camera
Messages
Opendor
Actuators
Settings
A
B
Menu
All available functions can be accessed from the menu screen.
MENU Press to open the navigation menu
HOME Press to quickly access the most used functions
DOOR ENTRY
SYSTEM
Press to access the directories and video entry monitor functions
CAMERAS Press to access the cameras directory
MESSAGES Press to view the recordings and messages in the video memory function
ALERTS Press to view alerts
LOCK-RELEASE Press to view the entrances that can be controlled
ACTUATORS Press to view the actuators that can be controlled
SETTINGS
Press to view information about the device and the applications installed, and to configure the
ringtone, display, operating language, date and time, widgets, video recordings and advanced
settings
Function shortcuts
WI-FI SETTINGS Press to access the Wi-Fi configurations
SHORTCUTS FOR
OTHER FUNCTIONS
Press to open the “shortcuts for other functions” menu
Call divert Press to enable call divert (visible, only if programmed)
Enable video recording
on lost Call
Press to automatically begin recording video if there is no answer (visible, only if
programmed)
Automatic answer
Press to enable the automatic answer function: on receipt of a call the monitor will start
communicating automatically
Audio message
Can be used to enable audio message playback on the external unit on receipt of an
incoming call (visible, only if programmed)
6
HOME [ ]
The home page provides quick access to the most common commands and to view the notifications in memory.
The home page can be customised from the settings (see "SETTINGS [ ]").
HOME
3:56 PM
Monday 23 April
Door entry system
Alerts
000000002
Monday 23 April, 03:10
Lock release and actuators
Entrance Emergency
Third party apps
This menu can be used to open other applications installed on the device (visible, only if installed)
HOME
3:56 PM
Monday 23, April
Door entry system
Alerts
000000002
Monday 23 April, 03:10
Lock release and actuators
Entrance
Navigation bar
BACK Press to return to the previous screen
COMELIT APP
While third-party Apps are open, press
to return to the Comelit App
RECENT APPLICATIONS Press to view all recently used applications
7
DOOR ENTRY SYSTEM / CAMERAS [ / ]
In the door entry system/cameras section, the following functions are available: self-ignition of an external unit, intercom call,
call to a switchboard, camera switch on.
f Touch an entry in the directory to control the desired action (see table)
FUNCTIONS AVAILABLE FOR EACH CATEGORY
Functions External unit Intercoms Switchboards Camera
answer / audio
activation
f press to begin
communication with
the caller
reject call
f press to reject/end
the call
call closure
f press to end the call
lock release
f press to activate the door lock of the interlocutor
external unit
microphone
deactivation
microphone activate
start video recording stop video recording
deactivate monitor
camera
activate monitor
camera
video request
Up to 3 secondary “slave” devices; the image from the external unit will appear on the display automatically. In the case
of secondary “slave” devices, from 4th to 15th the image can be displayed by pressing the “video request” button (please
contact your installer for further information).
Video from your camera can be sent to your interlocutor by activating the front camera.
Perform an action on an entry in the directory
Entrance
Entrance
DOOR ENTRY SYSTEM
OUTGOING CALL
8
Customising a directory image
Scrolling through the directories
VideocitofoniaDOOR ENTRY SYSTEM DOOR ENTRY SYSTEM
Livingroom
1. Press on the desired entry and select "Edit" to access the editing screen.
2. Press the “image” icon.
3A. Select "Gallery" to search for an image stored in the memory of your Comelit device
3B. Select "Camera" to take a photo using the camera on the device.
f Press
to take the photo
4. Press
to save.
Entrance
Entrance
DOOR ENTRY SYSTEM
OUTGOING CALL
Edit
Remove
DOOR ENTRY SYSTEM
Entrance
00000100
Vip address
3A 3B
4
1
2
9
MESSAGES [ ]
In the Messages section, you can view and delete the recordings made (from external unit and remote camera) and the
messages in the video memory.
1. Enter the Messages/Answering service page
2. Press the video you want to view to start the playback.
f Drag an entry to the right (or left) to save it to the SD card.
1. Press and hold the entry you want to delete.
2. Press
to delete the selected entry.
MESSAGES
Answering service
Answering service
1
Entrance
00:00:30 Monday 23 Apir, 03:43
Entrance
00:00:30 Monday 26 Apir, 10:30
Entrance
00:00:30 Monday 27 Apir, 08:43
2
Saving a video message to SD card
Deleting a video message
Viewing a video message
Answering service
Entrance
00:00:30 Monday 23 Apir, 03:43
Entrance
00:00:30 Monday 26 Apir, 10:30
Entrance
00:00:30 Monday 27 Apir, 08:43
1
2
Entrance
00:00:30 Monday 23 Apir, 03:43
Entrance
00:00:30
Entrance
00:00:30 Monday 27 Apir, 08:43
Answering service
10
ACTUATORS / LOCK RELEASE [ / ]
This section provides a list of actuators/lock-release controls
f Touch the entry to activate it
Entrance
Actuator
ACTUATOR
11
SETTINGS [ ]
Device
Language Used to set the device language.
Date and Time
Used to set the date and time shown on the device:
f
Activate “Automatically set Date & Time” and select your time zone for automatic
updating of the date and time via internet.
f
Deactivate “Automatically set Date & Time” to set the device date and time
manually and press the individual elements to customise them.
Screen lock Used to lock the screen for 60 seconds for cleaning purposes.
General information Used to view device information (IP address, ViP address, ...).
Installed apps Used to view the list of applications installed on the device.
App store
Used to install/uninstall applications on the device.
1. Search for the application you want to install/uninstall
• from recent applications by pressing
• in categories by pressing
• using the relevant search tool by pressing
2. Tap the application box to access the installation screen.
3. Press INSTALL/UNINSTALL to install/uninstall the application.
f Press
to view the available updates
f Press
to access the settings (advanced users only)
General parameters
Display
Used to customise the Screen timeout (programmed period of inactivity preceding display
switch-off) and display brightness.
Ringtone
Used to customise the ringtone for: Outgoing Call, Floor Door Call, Intercom Call, Alarm,
Multiple Call, Group Call, Notifications.
Volume Used to adjust key tone, ringtone and loudspeaker volume.
Widget
Used to select what is visible on the home page and set the order of the elements:
1. Press and tick the elements you want to make visible on the home screen (max.
4).
2. Drag the boxes to the desired position.
Widget
Door entry system
Alerts
000000002
Monday 23 April, 03:10
Lock release and actuators
Entrance
Widget
3:56 PM
Monday 23, April
Door entry system
Alerts
000000002
Monday 23 April, 03:10
Lock release and actuators
Entrance
Date and Time
Door entry system
Lock release and actuators
Messages
Alerts
Cameras
Logo
1
3:56 PM
Monday 23, April
2
12
System
Audio message
Used to record an audio message for playback on the external unit on receipt of a call.
f press
to begin recording
f press
to pause the recording
f press
to listen to the message
f press
followed by to overwrite the message
To enable playback of the audio message used for the external unit on receipt of a call,
enter the shortcut menu via
Video recording
This function allows you to manage the video memory function parameters on the device:
• Enable video recording always: automatically starts video recording on receipt of a call
from an external unit
• Enable video recording on Missed Call: automatically starts video recording in the
event of a missed call.
• Recording time: used to set the duration of the video recording
Reset Used to reset the Wi-Fi configurations.
Advanced settings
Used to access advanced settings (installer menu).
f Press the icon and enter the password (default = 0000) to access the advanced
settings
13
Managing directories
Adding an entry to the Directory
Name: enter the description.
ViP address: enter the ViP address.
Image: see "Customising a directory image"
Name: enter the description.
ViP address: enter the ViP address.
Apartment: use the drop-down menu to select whether you want to configure a call to the whole apartment, just
the master (main) monitor or a slave (secondary) monitor of your choice.
Emergency call:
If “Emergency” is enabled the contact will be marked with a red line and, when calling from
home, it will be possible to make a priority emergency call.
Image: see "Customising a directory image"
Name: enter the description.
ViP address: enter the ViP address.
Emergency call:
If “Emergency” is enabled the contact will be marked with a red line and, when calling from
home, it will be possible to make a priority emergency call.
Image: see "Customising a directory image"
ViP (PAL/IP cameras)
Name: enter the description.
ViP address: enter the ViP address.
Automatic camera: select the desired camera from the drop-down menu.
Image: see "Customising a directory image"
RTSP (RTSP cameras)
Name: enter the description.
RTSP address: enter the Url address for the camera stream.
Username: User name for IP CAM access (as for camera configuration)
Password: password for accessing the IP CAM (as per camera configuration)
f Press
, select DOOR ENTRY SYSTEM / CAMERAS / LOCK RELEASE / ACTUATORS and access the desired directory
/
/ / / /
1. Press to add an entry to the directory.
2. Complete the mandatory fields (see table).
3. Press to save.
DOOR ENTRY SYSTEM
Entrance
00000100
Vip address
3
1
14
Deleting an entry in the Directory
DOOR ENTRY SYSTEM
Edit
Remove
Entrance
f Press and select “Remove” to delete the desired entry
Name: enter the description.
ViP address: enter the ViP address.
Relay: enter the number of the output you want to control.
Image: see "Customising a directory image"
Name: enter the description.
ViP address: enter the ViP address.
Actuator/Expansion: select the actuator or the expansion device number (from 1 to 10).
Actuator/Relay 1 Expansion: enter the number of the relay (1 or 2) or the number of the expansion device (from 1
to 10) you want to control.
Image: see "Customising a directory image"
15
Advanced settings [ ]
ViP Directories
Enable directory editing
Enable direct calls
Buttons
Key button
Button 1
Button 2
Self ignition button
Privacy button
Reset
Reset-EXTERNAL UNITS
Reset-INTERNAL UNITS
Reset-CONCIERGE
Reset-CAMERAS
Primary ViP address
ViP address
Role (Master / Slave)
Call ringtone repeat
External unit
Intercom
Floor door
Multiple
Group
Call times
Wait
Talk
Intercom
Shutdown delay
Call divert
Enable call divert
• ViP address
• Mode
• Time
Activate actuator
Priority call ¼
Call from Internal unit
Call from External unit
Call from switchboard
Floor call
Alarms
Priority call 1 / 4
Alarm
Text
ViP address
Advanced audio settings
Advanced noise suppressor
Advanced Echo cancelletion
Native Echo cancelletion
Echo cancelling level
Echo cancelling delay
Microphone amplification
Speaker amplification
Audio normalising
Browser
Enable browser
Filter
Firmware Update
Ethernet
IP address mode
default password = 0000
1st edition 11/2019
code 2G40002318
www.comelitgroup.com
Via Don Arrigoni, 5 - 24020 Rovetta (BG) - Italy
CERTIFIED MANAGEMENT SYSTEMS
/
