CREE LIGHTING OSQ-C Backlight Shield Installation guide

CREE LIGHTING
Brand
CREE LIGHTING
Model
OSQ-C Backlight Shield
Category
Car kits
Type
Installation guide
OSQ-C Series
LED Area Light
Back Light Shield
1 of 1 LPN00877X0005A0_A
INSTALLATION INSTRUCTIONS
INSTRUCTIONS D’INSTALLATION
www.creelighting.com
© 2023 Cree Lighting, A company of IDEAL INDUSTRIES. All rights reserved. For informational purposes only. Content
is subject to change. See www.creelighting.com/warranty for warranty and specifications. Cree® and the Cree logo are
registered trademarks of Cree, Inc. NEMA® is a registered trademark of the National Electrical Manufacturers Association.
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions should always
be followed including the following:
READ AND FOLLOW ALL SAFETY
INSTRUCTIONS
1. DANGER- Risk of shock- Disconnect power before installation.
DANGER – Risque de choc – Couper l’alimentation avant
l’installation.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE
TO INSTALL:
1
(4) Backlight Shield
Screws
BACK LIGHT SHIELD
STEP 1:
Position backlight shield on luminaire and
tighten 4 captive screws to 23 in-lbs (2.6
N•m) to attach shield. See Figure 1.
NOTE: Ensure that the backlight shield is
orientated with the vents opening towards
the front of the luminaire.
Insert Shield Screws
Into (4) Luminaire
Holes
Backlight Shield Vents
Opening Towards The
Front Of The Luminaire
OSQM-BLS
OSQL-BLS
OSQX-BLS
  • Page 1 1

CREE LIGHTING OSQ-C Backlight Shield Installation guide

CREE LIGHTING
Brand
CREE LIGHTING
Model
OSQ-C Backlight Shield
Category
Car kits
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents