ABB Video indoor station M2233x-x User manual

VER:1.0 │ │ 05.04.2017

ABB-Welcome

Pos: 2 /Di nA4 - Anl eitun gen Online /Inh alt /KNX /Doo rEntry /832 20-A P- xxx/Tit el blat t - 832 20-AP -xxx - ABB @ 1 9\mod_ 132 3249 806 476_15. docx @ 11 108 4 @ @ 1

83220 AP-6..-5..

7" video hands-free indoor

station, pushbutton

=== Ende der List e für Tex tma rke Cov er ===

ABB

-Welcome

| — 2 —

Pos: 4 /Bus c h-Jaege r (N eust rukt ur)/Mo dul-S truk tur/Onl i ne-D oku mentati on/ Inhal tsve rzeich nis ( --> Fü r alle Doku mente <--)/I nhal tsve rzeic hnis @ 19\ mod_13 206 490 44386_1 5.d ocx @ 109 653 @ @ 1

1 Safety ....................................................................................................... 4

2 Intended use ............................................................................................. 4

3 Environm ent .............................................................................................. 4

3.1 ABB devices ............................................................................. 4

4 Operation .................................................................................................. 6

4.1 Standard operations .................................................................. 6

4.1.1 Control elements ....................................................................... 6

4.1.2 Welcome screen and status bar ................................................. 8

4.2 Control actions ........................................................................ 10

4.2.1 Surveillance ............................................................................ 10

4.2.2 Intercom ................................................................................. 11

4.2.3 Calling guard unit .................................................................... 12

4.2.4 Switch actuator ....................................................................... 13

4.2.5 Setting up the voice and video connections .............................. 14

4.2.6 Opening the door .................................................................... 15

4.2.7 Muting .................................................................................... 16

4.2.8 Activating the custom function ................................................. 17

4.2.9 Event and picture memory/history ............................................ 19

4.2.10 Information.............................................................................. 23

4.2.11 Inserting an SD card................................................................ 24

4.2.12 Settings .................................................................................. 25

4.2.12.1 Overview ................................................................................ 25

4.2.12.2 Intercom ................................................................................. 28

4.2.12.3 Switch actuator ....................................................................... 31

4.2.12.4 Program button ....................................................................... 33

4.2.12.5 Leave home management ....................................................... 34

4.2.12.6 Voice message ....................................................................... 36

4.2.12.7 Setting door open password .................................................... 38

4.2.12.8 Blacklist .................................................................................. 39

4.2.12.9 Audio settings ......................................................................... 40

4.2.12.10 Auto-unlock ............................................................................. 42

4.2.12.11 Display settings ....................................................................... 44

4.2.12.12 Date and time ......................................................................... 46

4.2.12.13 Camera list ............................................................................. 48

4.2.12.14 Language ............................................................................... 49

4.2.12.15 Setup ...................................................................................... 50

4.2.12.16 Firmware update ..................................................................... 52

4.3 Cleaning ................................................................................. 53

4.4 Adjusting the device ................................................................ 54

ABB

-Welcome

| — 3 —

4.4.1 Terminal resistor ..................................................................... 54

4.4.2 Connection ............................................................................. 55

5 Technical data......................................................................................... 56

6 Mounting/Installation ............................................................................... 57

6.1 Requirements for the electrician............................................... 57

6.2 General installation instructions ............................................... 58

6.3 Mounting ................................................................................. 59

=== E nde der Li ste für Tex tmarke TOC ===

ABB

-Welcome

| — 4 —

Pos: 6 /Bus ch-J aege r (N eust rukt ur)/Mo dul-S truk tur/Onl i ne-D oku mentati on/Ü be rschri ften (- -> Für alle D okum ent e <--)/ 1. Eb ene/S - T/Si cherhei t @ 18\ mod _13026 127 917 90_ 15.doc x @ 103 357 @ 1 @ 1

1 Safety

Pos: 7 /Busc h-Ja ege r (Neus truk tur)/ Mo dul-St ruktu r/Onli ne-D oku ment ation /Si cherhei t (-- > Für all e Dok umente <--)/W arn hinwei se /Sicher heit - 230 V @ 18\mod_ 130 260 681675 0_15 .docx @ 1033 08 @ @ 1

Warning

Electric voltage!

Dangerous currents flow through the body when coming into direct or

indirect contact with live components.

This can result in electric shock, burns or even death.

■ Disconnect the mains power supply prior to installation and/or

disassembly!

■ Permit work on the 110-240 V supply system to be performed only by

specialist staff!

Pos: 8 /Bus c h-Jaege r (N eust rukt ur)/Mo dul-S t ruktu r/Onli ne-D oku ment ation /Übe rschri ften (--> Für alle D okum ent e <--)/ 1. Eb ene/A - F/B estim mun gsge mäßer Gebrau ch @ 18\ mod_13 027 6332 1316_1 5.do cx @ 1034 83 @ 1 @ 1

2 Intended use

Pos: 9 /Di nA4 - Anl eitun gen Online /Inh alt/K NX /Doo rEntry /832 20-AP -x xx/B esti mmungs gem aess er Ge bra uch - 83 220 -AP-x xx- 500 @ 2 0\mo d_1 324561 168 699 _15. docx @ 11272 8 @ @ 1

This device is an integral part of the ABB-Welcome door communication system and

operates exclusively with components from this system. The device must only be

installed in dry indoor rooms.

Pos: 10 /B usc h-J aeger (Neus truk tur )/Modul -S trukt ur/O nline -Doku me ntatio n/Übe rsc hrif ten ( --> Fü r alle Doku men te <-- )/1. E bene /U - Z/U mw elt @ 18\ mod _13 026 1415896 7_1 5.d ocx @ 103383 @ 1 @ 1

3 Environment

Pos: 11 /B us ch-J aeger (Neus truk tur )/M odul -Strukt ur/O nli ne-D oku mentati on/ Umw elt ( --> F ür all e Doku me nte <-- )/Hinw eis e/Hinw eis - U mwel t - Hi nweis El ektr oge räte @ 1 8\mo d_1302 763 973 434 _15. docx @ 10350 0 @ @ 1

Consider the protection of the environment!

Used electric and electronic devices must not be disposed of with

household waste.

– The device contains valuable raw materials that can be recycled.

Therefore, dispose of the device at the appropriate recycling

facility.

Pos: 12 /D i nA4 - A nlei tu ngen Onlin e/U eb ersc hrift en/2 ./A BB Gera ete @ 19 \mo d_1 323 162 843832_ 15. doc x @ 11 087 5 @ 2 @ 1

3.1 ABB devices

Pos: 13 /B usc h-Jaeg er (Neus truk tur )/Modul -S trukt ur/O nline -Doku me ntatio n/Umw elt ( --> F ür all e Doku me nte <-- )/Hinwei s e/Hinw ei s - Umwel t - AB B E lektro gerät e @ 19\ mo d_13231 627 458 39_15. docx @ 110 867 @ @ 1

ABB

-Welcome

| — 5 —

All packaging materials and devices from ABB bear the markings and test seals for

proper disposal. Always dispose of the packaging material and electric devices and their

components via an authorized recycling facilities or disposal companies.

ABB products meet the legal requirements, in particular the laws governing electronic

and electrical devices and the REACH ordinance.

(EU-Directive 2002/96/EG WEEE and 2002/95/EG RoHS)

(EU-REACH ordinance and law for the implementation of the ordinance (EG)

No.1907/2006)

ABB

-Welcome

| — 6 —

Pos: 18 /Di nA 4 - A nleitu ngen Onlin e/U ebersc hri ft en/1 ./Bedie nun g @ 18\mod_ 130 261 392 416 5_15.doc x @ 1 033 65 @ 1 @ 1

4 Operation

Pos: 19 /D i nA4 - A nlei tu ngen O nlin e/Ueb ersc hri ft en/2 ./Nor male r Bet rieb @ 18 \mo d_1 302 768 820965_ 15. doc x @ 10 3540 @ 2 @ 1

4.1 Standard operations

Pos: 20 /Di nA 4 - A nleitu ngen Onli ne/ Ueb ersc hrift en/3 ./B edie nele men te @ 20\ mod_13 232 6022 055 9_1 5.do cx @ 1 116 47 @ 3 @ 1

4.1.1 Control elements

Pos: 21 /Di nA 4 - A nleitu ngen O nlin e/In halt/K NX/ Do orEnt ry/83 220 -AP-xx x/Be dienel eme nte - 8322 0-AP -xxx @ 18\ mod_1 3032 128 53605_ 15.d ocx @ 103 673 @ @ 1

Fig. 1 Control elements

SD-Card

1

2 3 4 5 6 7

ABB

-Welcome

| — 7 —

No. Functions

1 7" Touch screen

2 Communication button

2A For incoming call, press this button within 30 seconds to activate

communication. Press it again to end call.

2B In standby mode, press this button to set up the voice and video

connections to the default outdoor station.

3 Unlock button

3A Press this button to open the door at any time.

3B Auto-unlock: The door is automatically opened after an incoming call.

If the LED lights up, this indicates auto-unlock.

If the LED flashes rapidly, it means the door is open over the set time. (The

sensor must be connected first.)

4 Mute button

4A In standby mode, press this button to mute the ringtone for this indoor

station.

4B In standby mode, hold this button to mute the ringtone for all indoor

stations in the apartment.

4C Press this button to reject incoming call.

4D During a conversation, press this button to mute the microphone.

If the LED lights up, this indicates a mute status.

5 Program button

5A Release the lock connected with outdoor station (COM-NC-NO)

(default function)

5B *Programmable for additional functions, e.g. call guard unit,

intercom, etc.

6 Surveillance button

6A In standby mode, press this button to surveil the default outdoor station.

6B When video is on the screen, press this button to snapshot manually.

7 System setting button

Enter the system settings menu for various functions of the device.

*For use of this button, please contact your electrical installer.

ABB

-Welcome

| — 8 —

4.1.2 Welcome screen and status bar

Fig. 2 Welcome screen and status bar

No. Functions

1 Current date

- Click here to set the current date.

2 Time

- Click here to set the current time.

3 System information

- Click on this icon to call up the address (number of the indoor station,

default outdoor station, master or slave station) on this panel and the

current software information.

4 History

- New informations (events or picture memory) are available when this icon

flashes. This also indicates a missed call or a new voice message.

- Click on this icon to display the events and picture memory .

5 Mute function

- Icons "crossed-out handset" and "crossed-out bell" indicate the mute

status of the microphone or the loudspeaker of the panel.

6 Open entrance door

3 9

2

4

65 7 8

10

1

11

12

13

14

ABB

-Welcome

| — 9 —

- The "open door" icon is displayed when you press the door opener or

activate the function "automatic door opener".

7 SD card

- The icon shows whether or not you have inserted an SD card.

8 Switch actuator

- The icon is shown after you activate the switch actuator.

9 Cleaning blockage

- The icon is shown when the display is blocked to prevent functions being

enabled during cleaning.

10 SOS

- Hold this button for 3s to send an SOS signal to a guard unit.

11 Surveillance

- Click on this button to start to survey the default outdoor station.

12 Intercom

- Click on this button to enter the intercom call menu.

13 Guard unit

- Click on this button to call guard unit.

14 Switch actuator

- Click on this button to enter the switch actuator menu.

Pos: 29 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1

Pos: 22 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1

ABB

-Welcome

| — 10 —

Pos: 26 /Di nA 4 - A nleitu ngen Onli ne/ Ueb ersc hrift en/2 ./B edie nakti onen @ 2 0\m od_ 1323 262294 281 _15. docx @ 11 191 1 @ 2 @ 1

4.2 Control actions

Pos: 27 /Di nA 4 - A nleitu ngen O nlin e/Ueb ersc hrift en/3 ./S prec h- und Videov erbi ndu ng @ 20\mod _13 232 6236 8700_1 5.do cx @ 1119 27 @ 3 @ 1

4.2.1 Surveillance

Pos: 28 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry/83 220 -AP -xxx/S p rech- u nd Vi deov erbi ndung - 8322 0-A P-xxx @ 20\ mo d_1 3232623 418 52_ 15.d ocx @ 111919 @ @ 1

Fig. 3 Surveillance

Click on this button to start to survey the default outdoor station. Only the video

connection appears first. Press button to activate the voice connection.

No. Function

1 Designation of camera.

2 Set volume with the "plus/minus" buttons.

3 If several outdoor stations or external cameras are connected.

- Select a camera with the “forward/back” buttons

4 Click on the button to set the display.

• Saturation of the display (plus and minus).

• Contrast of the display (plus and minus).

Pos: 29 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1

2

3

4

1

Surveillance

ABB

-Welcome

| — 11 —

Pos: 30 /D i nA4 - A nlei tu ngen O nlin e/Ueb ersc hri ft en/3 ./T uer oeff nen @ 2 0\mo d_1 323 263277 453 _15. docx @ 11 193 5 @ 3 @ 1

4.2.2 Intercom

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

Fig. 4 Intercom

Click on this button to enter intercom call menu, and then the following functions are available:

(Set the intercom call lists in the “system setting-intercom setting” menu first.)

No. Functions

1 The name of an intercom.

2 The address of an intercom.

3 The type of an intercom (external or internal).

means an external intercom from a different apartment.

means an internal intercom from the same apartment.

4 Click on “call” button to make an intercom call.

5 Click on “back” button to return to the Start screen.

4

1

Intercom

5

2 3

ABB

-Welcome

| — 12 —

4.2.3 Calling guard unit

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

Fig. 5 Calling guard unit

Click on the "guard unit" button to call a guard unit, and then the following functions are

available:

No. Functions

1 Designation of a guard unit.

2 Set volume with the "plus/minus" buttons.

Call guard unit

2

1

ABB

-Welcome

| — 13 —

4.2.4 Switch actuator

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

Fig. 6 Switch actuator

Click on “switch actuator” button to enter the switch actuator menu and then the following

functions are available:

(Set actuator lists in the “system setting-switch actuator” menu first.)

No. Functions

1 The name of an actuator.

2 The address of an actuator.

3 Click on this button to activate the selected actuator.

4 Click on this button to go back to the Start screen.

Switch actuator

4

1 2

3

ABB

-Welcome

| — 14 —

4.2.5 Setting up the voice and video connections

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

Fig. 7 Setting up the voice and video connections

The following functions are available for setting up the voice and video connections:

(Press the communication button.)

No. Functions

1 Designation of the camera.

2 Set the volume with the "plus/minus" buttons.

3 If several outdoor stations or external cameras are connected, select the

camera with the “forward/back” buttons.

4 Click on the buttons to set the display.

• Saturation of the display (plus and minus).

• Contrast of the display (plus and minus).

Pos: 29 /B usch-J aeg er (N eust ruktur )/M odul -Strukt ur/O nline -Doku me ntatio n/St euer mod ule - Onli ne-Dok ume ntati on ( --> Für alle Dok ume nte <- -)/ +++++ +++++ ++ Sei ten umbruch ++++ ++++ +++ + @ 9\m od_126 8898 668 093_0. docx @ 52149 @ @ 1

2

3

4

1

ABB

-Welcome

| — 15 —

4.2.6 Opening the door

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

Fig. 8 Opening the door

Press the key button to activate the door opener, and then the following functions

become available:

No. Functions

1 The "open door" icon is displayed after you press the door opener or

activate the function "automatic door opener."

1

ABB

-Welcome

| — 16 —

4.2.7 Muting

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

Fig. 9 Muting

The muting menu (mute timer) has the following functions:

No. Functions

1 No call is pending:

If you press the "mute function" while no call is pending, the bell sound of

the panel will be deactivated for a certain period.

- If calls come in during this time, only the video image is displayed.

- Missed calls are displayed in the events and pictures memory .

2 A call is pending:

If you press the button "mute function" during a call, the microphone of the

panel will be deactivated until the button is pressed again.

1 2

ABB

-Welcome

| — 17 —

4.2.8 Activating the custom function

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

1 2

3

ABB

-Welcome

| — 18 —

Fig. 10 Activating the custom function

The program button can be configured with different functions, e.g. call to guard unit,

intercom call or control switch actuator. Its default function is the release of the second

lock, which is connected with terminals COM-NC-NO of an outdoor station.

If no function is assigned to the program button, there will be no action after pressing

this program button.

Only the existing intercom call list & switch actuator list can be assigned for the program

button.

No. Functions

1

If the function “release second lock” is assigned to the program button,

the "open door" icon will be displayed when you press the program button.

2 If the function “control switch actuator” is assigned to the program button,

the "actuator" icon will be displayed when you press the program button.

3 If the function “make an intercom call” is assigned to the program button,

the call will be activated directly when you press the program button.

4 If function “call guard unit” is assigned to the program button, the call will

be activated when you press the program button.

4

ABB

-Welcome

| — 19 —

4.2.9 Event and picture memory/history

Pos: 31 /Di nA 4 - A nleitu ngen Onlin e/In halt /KNX /Do orEnt ry /83220 -A P-xxx / Tuer o effne n - 832 20-AP -x xx @ 20\m od_ 132326 795 847 9_15 .docx @ 1 121 09 @ @ 1

Fig. 11 Event and picture memory/history