Brookstone FLIGHTFORCE Safety And Operating Instructions Manual

Brand: Brookstone

Model: FLIGHTFORCE

Type: Safety And Operating Instructions Manual

This manual is also suitable for

324463

324463_INS_Racing Drone with Obstacle Course

Size:5”Wx4.75”H_Output:100%_Prints:1/1,Blk

Flight Force

RACING DRONE

WITH OBSTACLE COURSE

for ages

TABLE OF CONTENTS

Warnings and Cautions ..........................................................................1

FCC Information ................................................................................5

Li-Po Battery Warning ...........................................................................6

AAA Battery Precautions.........................................................................6

Charging the Drone's Battery ....................................................................7

Inserting the Controller Batteries .................................................................7

Controller.......................................................................................8

Synchronize the Drone with the Controller.........................................................9

Set Your Speed .................................................................................9

Flying Your Drone ............................................................................. 10

Ending Flight .................................................................................10

Trimming the Drone.............................................................................11

Flight Time ...................................................................................13

Headless Mode Function ......................................................................13

Return Home Function.........................................................................13

Assembling the Obstacles...................................................................... 14

Taking Pictures and Videos.....................................................................16

Viewing Pictures and Videos ....................................................................17

Electronic Protection System....................................................................17

Replacing Damaged Rotor Blades ..............................................................18

Replacing the Drone's Cover ...................................................................18

Using the WiFi Racer App......................................................................18

Taking Pictures and Videos with the App ........................................................20

Care and Maintenance..........................................................................21

Speciﬁcations ..................................................................................21

Warranty...................................................................................... 24

CAUTION

• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.

THERE ARE NO SERVICEABLE PARTS INSIDE.

• TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS UNIT TO RAIN OR MOISTURE.

The lightning flash with arrow-head symbol within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the unit’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and maintenance (servicing)

instructions in the literature accompanying the unit.

IMPORTANT SAFETY INSTRUCTIONS

All of the safety and operating instructions should be read, adhered to and followed

before the unit is operated.

SAVE THESE INSTRUCTIONS

2 3

DANGER

To reduce the risk of electric shock, burns, fire or injury:

1. Do not use while bathing or in a shower.

2. Do not place or store unit where it can fall or be pulled into a tub or sink.

3. Do not place in, drop or submerge in water or other liquid.

4. Do not reach for unit that has fallen into water. Unplug it immediately.

5. Care should be taken so that objects do not fall and liquids are not spilled onto the

unit.

WARNING

1. Close supervision is necessary when this appliance/product is used near children or

mentally disabled individuals.

2. This drone is recommended for use by persons aged 14 and older.

3. Use this unit only for its intended use as described in this manual.

4. Unplug this unit during lightning storms or when unused for long periods of time.

5. Never drop or insert an object into any opening.

6. Protect the charging cable from being walked on or pinched, particularly at plug

outlets, convenience receptacles and the point where it exits the unit.

7. Do not allow charging cable to touch hot surfaces. Wrap charging cable loosely

around the unit when storing.

8. The unit should be situated away from direct sunlight or heat sources such as radiators,

electric heaters, heat registers, stoves, or other units (including amplifiers) that produce

heat. Avoid placing on top of stereo equipment that radiates heat.

8. Never block the air openings of the unit with materials such as clothing, plastic

bags or papers, or place it on a soft surface such as a bed or couch, where the air

openings may be blocked.

9. Do not carry this unit by charging cable or use cable as a handle.

10. Never operate this unit if it has a damaged cable, if it is not working properly, or if it

has been dropped or damaged, or dropped into water. If the unit’s charging cable or

plug is damaged, do not attempt to fix it yourself.

11. To avoid the risk of electric shock, do not disassemble or attempt to repair the unit.

Incorrect repair can cause risk of electric shock or injury to persons when unit is

used.

12. Do not operate in the presence of explosive and/or flammable fumes.

DRONE WARNINGS

1. The drone’s blades revolve at high speeds and can cause damage to the user,

spectators and animals. Stand away from the drone to reduce the risk of getting into

the flight path and always maintain visual contact with the drone while flying.

2. Warn spectators that you will be flying your drone so that they are aware of its

position.

3. Before flight, inspect the rotor blades to make certain that the blades are securely

fastened to the drone. Do not use if there is any damage that impacts flight

characteristics.

4. Before flying check your local laws and regulations pertaining to drone usage,

particularly around airports.

5. Operating the drone in a wide-open space is recommended. The ideal space should

have a 200-foot radius, without buildings, crowds, or electrical power lines.

6. Do not fly near tall buildings, high voltage cables, or other places that produce signal

interference. Signal interruptions may result in accidents.

7. Parental guidance or adult supervision is suggested at all times.

8. If you are flying the drone with others, make sure all spectators are behind you and at

least 6 feet from the drone.

4 5

9. For best performance, it is recommended that you operate the drone in zero wind

conditions, as wind can greatly affect the performance of the aircraft.

10. Record responsibly. Respect the privacy of individuals when recording video or taking

photos with the drone.

11. Obtain permission from individuals before circulating videos or photos taken with the

drone.

CAUTION: DO NOT ATTEMPT TO FLY THE DRONE IF THERE IS RAIN, SNOW,

HEAVY WINDS, THUNDER OR LIGHTNING OUTDOORS. IT COULD DAMAGE YOUR

PRODUCT AND MAY CAUSE BODILY HARM.

WARNING!

• Choking/cutting hazard. Small parts/sharp rotor blades.

• Keep hands, hair and loose clothing away from the propeller when the power switch

is turned to the ON position.

• Not suitable for children under 14 years old. Parental supervision recommended.

FCC INFORMATION

Caution: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B Digital

Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation.

If this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that

to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions:

1. This equipment may not cause harmful interference.

2. This equipment must accept any interference received, including interference that may

cause undesired operation.

WARNING: To comply with FCC's RF radiation exposure limits for general population/

uncontrolled exposure, the antenna(s) used for this transmitter must be installed to

provide a separation distance of at least 20 cm from all persons and must not be

collocated or operating in conjunction with any other antenna or transmitter.

FCC ID: #2AKPPHELICUTE

DO NOT FLY THE DRONE IN FOUL WEATHER!

WARNING

WARNING!

CHOKING HAZARD - Small

parts. Not suitable for children

under 3 years.

LI-PO BATTERY WARNING

This device contains a Lithium-Polymer battery. The battery must be recycled or disposed

of properly. Contact your local waste management office for information on battery

recycling or disposal.

Use only the supplied cable to recharge the battery. Improper charging may damage the

battery and the device.

Do not attempt to open the rechargeable battery or battery pack. There are no

serviceable parts inside.

Keep the battery out of reach of children. If swallowed, consult a physician immediately.

Do not hit, throw, or drop the battery on any hard surface.

Do not immerse the battery in water; keep in a dry, cool place.

Do not overcharge the battery. Charge for one hour or less. Monitor the charging process.

When storing the battery, store it with a partial charge. Do not store when fully charged or

depleted.

Do not expose the battery to high temperatures or dispose of battery in a fire as it may

explode. The battery may also explode if damaged.

AAA BATTERY PRECAUTIONS

Dispose of used batteries properly. Do not dispose of batteries in a fire.

Do not leave the batteries where a child or pet could play with or swallow them. If the

batteries are swallowed, contact a physician immediately.

The batteries may explode if mistreated. Do not attempt to recharge or disassemble the

batteries.

Use only fresh batteries of the required size and type. Do not mix old and new batteries,

different types of batteries, or rechargeable batteries of different capacities.

CHARGING THE DRONE'S BATTERY

The Racing Drone includes a rechargeable Lithium-Polymer battery. Charge the battery

before first use.

To charge the drone's battery:

1. Remove the battery from the compartment on the underside of the drone.

2. Connect the charging cable to the

charging terminal on the battery.

3. Insert the charging cable's USB

connector into a USB port on an

active device, such as a computer,

USB adapter, or power bank.

4. The Charging Indicator in the USB

end of the charging cable is red while

charging, and turns off when the battery is fully charged.

INSERTING THE CONTROLLER BATTERIES

The controller uses 4 AAA batteries (included) which must be inserted before first use.

To insert the controller's batteries:

1. Using the included screwdriver, open the

battery cover on the back of the controller.

2. Insert 4 AAA batteries, following the polarity

indicators.

3. Replace the battery cover.

CONTROLLER

SYNCHRONIZE THE DRONE WITH THE CONTROLLER

1. Ensure that the battery has been fully charged (see Page 7).

2. Insert the battery into the battery compartment on the underside of the drone and

plug the battery's charging terminal into the drone.

3. Place the drone on a flat surface.

4. Press the controller's left control stick downward.

5. Slide the controller's ON/OFF switch to the ON position.

6. Very slowly, move the left control stick to its upper limit. You will hear a tone.

7. Move the left control stick down slowly. When the left control stick returns to its

starting position in the lower section, you will hear another tone and the LED lights

stop flashing. The controller and drone are now synchronized.

SET YOUR SPEED

The drone has three speed settings. While learning to use the drone, it is advisable to

start by using the slowest speed setting.

To check and change the speed, press the Speed Selector on the controller.

• If you hear two tones, the drone is in slow speed.

• If you hear three tones the drone is in intermediate speed.

• If you hear a continuous series of tone the drone is in fast speed.

1. Speed Selector

2. Power LED

3. Left Control Stick

4. Left/Right Rotate Trim

5. Return Home Button

6. Headless Mode Button

7. Forward/Backward Trim

8. Left/Right Trim

9. Right Control Stick

10. Camera LED

11. Camera Button

12. Smartphone Holder

54 6

FLYING YOUR DRONE

Use the controller's control sticks to fly your drone. The left control stick controls the

ascent, descent, left turn and right turn. Move the stick slowly to avoid collisions and

crashes.

The right control stick controls the forward, backward and lateral displacement (moving

sideward without turning) in both directions.

10 11

TRIMMING THE DRONE

To ensure that your drone can fly straight and level, you must trim the aircraft. This can be

done manually or automatically.

MANUAL TRIM

Manual trim consists of calibrating the movement of your drone so it remains stable both

in takeoff and in flight.

NOTE: It is best to make final trim adjustments when the craft is airborne.

(1) Left/Right Rotate Trim: Corrects unintentional movement in which the drone rotates

left or right in a horizontal plane. Press in the opposite direction of the rotation. Press

until the rotation stops.

(2) Forward/Backward Trim: Corrects unintentional forward/backward motion . Press in

the opposite direction of the unintentional motion. Press until the motion stops.

(3) Left/Right Trim: Corrects unintentional lateral (side to side) movement. Press in the

opposite direction of the unintentional motion. Press until the motion stops.

ENDING FLIGHT

To end your flight, switch off the controller and remove the battery from the drone. If you

will not be flying again for several days, also remove the batteries from the controller.

AUTOMATIC TRIM

Automatic Trim resets the drone to its default settings. Automatic Trim is useful in

situations such as:

• The aircraft has had an impact that has affected its gyroscope/electronic stabilizer.

• You have transported the aircraft from one place to another.

• Your drone does not maintain its fixed position when hovering.

To reset using Automatic Trim:

1. Switch the controller's Power button to the ON position.

2. Move both left and right control sticks to the bottom-left. The LED lights will flash

rapidly, indicating that the reset is in process.

3. After 10 seconds, return both control sticks to their initial position. The lights on the

drone will stop flashing, indicating that the reset completed successfully.

It is advisable to perform an Automatic Trim to reset to default settings fairly often.

FLIGHT TIME

Your drone's flight time varies depending on a range of factors, such as:

• The battery charge level

• The speed at which you fly your aircraft.

• The wind speed to which the aircraft is subjected.

As a general rule, with the battery fully charged you can expect a continuous hovering

flight time of up to 7 minutes.

HEADLESS MODE FUNCTION

You can set the forward direction of your drone to a cardinal point. For example, if the

drone is pointing north when you activate Headless Mode, north will be the forward

direction, regardless of the position of the front and back of the drone.

To activate Headless Mode, before take-off press the Headless Mode button. You will

hear tones from the controller, indicating that Headless Mode is activated. Headless

Mode must be activated before take-off. To reset to a new direction, you must reboot the

drone by disconnecting and reconnecting the drone's battery. To disable Headless Mode,

press the Headless Mode button again.

RETURN HOME FUNCTION

The Return Home function allows you to bring the drone back to its starting position,

moving backward based on the direction that was set on take-off.

NOTE: Using this feature is not recommended until you are fully experienced with

controlling your drone.

To activate the Return Home function, press the Return Home Button. The drone will

move in the backward direction, based on the direction set on take-off.

To deactivate the Return Home function, perform any movement with the right control

stick.

ASSEMBLING THE OBSTACLES

The obstacles are pre-cut on three foam core boards.

Before assembling, remove each piece and pop out the foam from the pre-cut slots.

14 15

To assemble the landing pad:

1. Align the tabs in Part 1 (4 pieces) with the slots in the bottom of Part 2 and push to

attach.

To assemble the stunt ring:

1. Bend the ends of Part 5 along the pre-creased lines.

2. Align the slots in Part 5 with the slots in Part 3 and push to attach.

To assemble the course flag:

1. Align the slot on Part 4 with the slot on the bottom of Part 6 and push to attach.

2. Align the slots in Part 7 with the tabs in the combined Part 4 and Part 6 and push

to attach.

6 3 2 5

1 7

VIEWING PICTURES AND VIDEOS

If you are using the Racing Drone app, you can view pictures and videos taken with

the app on your smartphone. If you are not using the app, you can store pictures on a

Micro SD card, purchased separately, and view them on a computer or other device that

supports the Micro SD card format.

To use a Micro SD card, slide the card into the Micro SD card slot on the bottom of the

drone, under the antenna wire. Your pictures and videos will be stored on the card.

To view the pictures and videos:

1. Carefully remove the Micro SD card from the drone.

2. Insert the Micro SD card into your viewing device, such as your computer. Ensure

that the card is inserted correctly to avoid damaging the components.

3. Open the Devices list on your viewing device and locate the newly recognized

storage device.

4. Open the storage device. You will see one folder for videos and one folder for

photos. The photos are stored in JPG format; the videos are stored as MP4 files.

If you are unable to open these standard formats, you can convert the files or

download appropriate software.

ELECTRONIC PROTECTION SYSTEM

Your drone is equipped with a low-voltage protection system. When the drone's battery

level is low, the control system will cut the power supply to the rotors. You must recharge

the battery to resume flying.

TAKING PICTURES AND VIDEOS

NOTE: Pictures are saved on an optional Micro SD card. See Page 17.

To take pictures or videos with your drone, activate the camera by sliding the Camera

Power switch backward, which is the ON position. The Camera LED on the controller will

begin blinking.

To take a picture, press the Camera button on the controller. A tone will sound.

To take a video, press and hold the Camera button for 3 seconds.

Two tones will sound, indicating that the video has started. To end the

video, press and hold the Camera button again for 3 seconds.

To turn off the camera, slide the Camera Power switch forward.

Turning off the camera increases the flight time of your drone.

NOTE: To take pictures and videos using the Racing Drone app, see

Page 20.

REPLACING DAMAGED ROTOR BLADES

The drone has four rotors, two of which turn

clockwise (A) and two turn counterclockwise (B). Four

replacement rotor blades are included with your drone,

two type A and two type B.

If a rotor blade becomes damaged, replace it by

removing the damaged blade and replace it with a new

blade of the same type.

If you need additional replacement rotor blades, contact

Brookstone Customer Service at 800-292-9819.

REPLACING THE DRONE'S COVER

Your drone comes with a replacement drone cover in an alternate color. To change the

drone cover:

1. Remove the drone's battery.

2. Squeeze the cover's arms to remove them from the slots to release the cover.

3. Gently pull the cover off.

4. Attach the new cover, fitting the arms into the slots, and replace the battery.

USING THE WiFi RACER APP

Instead of controlling your drone with the controller, you can control your drone with your

smartphone or tablet using the WiFi Racer app.

Go to the App Store

(for Apple devices) or Google Play

(for Android

devices) to

download the WiFi Racer app.

NOTE: If the app is not listed in the App Store

on an iPad

, change filters to Supports

iPhone

Only.

App Store

is a service mark of Apple Inc., registered in the U.S. and other countries.

iPad

and iPhone

are trademarks of Apple Inc., registered in the U.S. and other countries.

Android

and Google Play

are registered trademarks of Google, Inc.

To control your drone with the app:

1. Place the drone on a flat surface and connect the drone's battery. Ensure that the

camera is turned on.

2. From your device's WiFi list, select Racing Drone.

3. Start the app on your device and tap INSTRUCTIONS to learn how to control your

drone with the app.

4. After reviewing the instructions, tap CONTROLS on the Home screen. The control

panel will display, and you will see a live image broadcast from the drone's camera.

NOTE: To switch between Right Hand and Left Hand mode, tap SETTINGS on the Home

screen and turn on Right Hand Mode.

If you are not receiving a signal, disconnect the drone, restart your WiFi connection, and

repeat the previous steps.

Return to

Home screen

Take Photo Record Video

Access

Media

Speed

Track

Route

Show/Hide

Controls

Flip Camera

Headless Mode

Gyro Calibrate

Forward/Backward Trim

Right Hand Mode: Throttle

Left Hand Mode: Direction

Left Hand Mode: Throttle

Right Hand Mode: Direction

Left/Right Rotate Trim

Left/Right Trim

TAKING PICTURES AND VIDEOS WITH THE APP

To take pictures and videos with the WiFi Race Drone app, connect to the app as

described on Page 18. On the top of the screen notice the icons representing a camera

and a video recorder. Tap the icon to take pictures or videos.

The pictures and videos will be stored on your mobile device and on the drone's Micro

SD card, if one has been installed. Pictures and videos can also be accessed by tapping

the Access Media icon in the app.

CARE AND MAINTENANCE

• Clean with a soft, damp cloth.

• Do not use harsh cleaning agents.

• Do not submerge in water or other liquids.

• Check components regularly, such as the rotor blades, chassis, motors. If any

component is damaged or worn, do not use the drone until the component has been

repaired or replaced.

• Perform an Automatic Trim to reset fairly often.

• Check the drone's battery charge regularly. When storing, ensure that the battery is

partially charged. Do not store the battery in a fully charged or discharged state.

SPECIFICATIONS

Drone Size ........................................................................ Approx. 5.5 x 5.5 x 1.6 in. (140 x 140 x 41 mm)

Drone Weight .................................................................................................................................... Approx. 1.8 oz (50 g)

Signal Type ..........................................................................................................................................................................2.4 GHz

Controller Batteries .........................................................................................................................................4 x 1.5V AAA

Drone Battery ............................................................................................................3.7V/450mAh Lithium Polymer

Range .......................................................................................................................................Up to 100 feet (30 meters)

Movement Channels .....................................................................................................................................................................4

Camera ................................................................................................................................................................................720p HD

22 23

NOTES NOTES

ONE (1) YEAR LIMITED WARRANTY

Brookstone

warrants this product against defects in materials and/or workmanship

under normal use for a period of ONE (1) YEAR from the date of purchase by the

original purchaser (“Warranty Period”). If a defect arises and a valid claim is received

within the Warranty Period, at its option, Brookstone will either 1) repair the defect

at no charge, using new or refurbished replacement parts, or 2) replace the product

with a new product that is at least functionally equivalent to the original product, or

3) provide a store credit in the amount of the purchase price of the original product.

A replacement product or part, including a user-installable part installed in accordance

with instructions provided by Brookstone, assumes the remaining warranty of the

original product. When a product or part is exchanged, any replacement item becomes

your property and the replaced item becomes Brookstone’s property. When a store

credit is given, the original product must be returned to Brookstone and becomes

Brookstone’s property.

Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service

at 1-800-292-9819. Please be prepared to describe the product that needs service

and the nature of the problem. A purchase receipt is required. All repairs and

replacements must be authorized in advance. Service options, parts availability and

response times will vary. You are responsible for delivery and the cost of delivery of

the product or any parts to the authorized service center for replacement, per our

instructions.

Limits and Exclusions: Coverage under this Limited Warranty is limited to the United

States of America, including the District of Columbia and the U.S. Territories of

Guam, Puerto Rico, and the U.S. Virgin Islands. This Limited Warranty applies only

to products manufactured for Brookstone that can be identified by the “Brookstone”

trademark, trade name, or logo affixed to them or their packaging. The Limited

Warranty does not apply to any non-Brookstone products. Manufacturers or

suppliers other than Brookstone may provide their own warranties to the purchaser,

but Brookstone, in so far as permitted by law, provides these products “as is.”

This warranty does not apply to: a) damage caused by failure to follow instructions

relating to product’s use or the installation of components; b) damage caused by

accident, abuse, misuse, fire, floods, earthquake or other external causes; c) damage

caused by service performed by anyone who is not a representative of Brookstone;

d) accessories used in conjunction with a covered product; e) a product or part

that has been modified to alter functionality or capability; f) items intended to be

periodically replaced by the purchaser during the normal life of the product including,

without limitation, batteries or light bulbs; g) any product sold “as is” including, without

limitation, floor demonstration models and refurbished items; or h) a product that is

used commercially or for a commercial purpose.

BROOKSTONE SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING

OUT OF ANY BREACH OF THIS WARRANTY. TO THE EXTENT PERMITTED BY

APPLICABLE LAW, BROOKSTONE DISCLAIMS ANY AND ALL STATUTORY OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES

OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND

WARRANTIES AGAINST HIDDEN OR LATENT DEFECTS. IF BROOKSTONE

CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES, THEN

TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE

LIMITED IN DURATION TO THE DURATION OF THIS EXPRESS WARRANTY.

Some states disallow the exclusion or limitation of incidental or consequential damages

or how long an implied warranty lasts, so the above exclusions or limitations may not

apply to you. This warranty gives you specific legal rights and you may also have other

rights, which vary from state to state.

324463

Rev 1

Find thousands more

great ideas online

Brookstone.com | 1-800-846-3000

1 Innovation Way, Merrimack, NH 03054

Brookstone FLIGHTFORCE Safety And Operating Instructions Manual

Brand: Brookstone

Model: FLIGHTFORCE

Type: Safety And Operating Instructions Manual

This manual is also suitable for

324463

Download PDF

report

Brookstone FLIGHTFORCE Safety And Operating Instructions Manual

This manual is also suitable for

Brookstone FLIGHTFORCE Safety And Operating Instructions Manual

Related papers

Other documents