Avaya DEFINITY Server CSI Maintenance Manual

Maintenance for

Avaya DEFINITY® Server CSI

Volumes 1 and 2

Release 1.2

555-233-119

Issue 5

October 2002

Notice

Every effort was made to ensure that the information in this document

was complete and accurate at the time of printing. However, informa-

tion is subject to change.

Preventing Toll Fraud

“Toll fraud” is the unauthorized use of your telecommunications sys-

tem by an unauthorized party (for example, a person who is not a cor-

porate employee, agent, subcontractor, or is not working on your

company's behalf). Be aware that there may be a risk of toll fraud

associated with your system and that, if toll fraud occurs, it can result

in substantial additional charges for your telecommunications ser-

vices.

Avaya Fraud Intervention

If you suspect that you are being victimized by toll fraud and you need

technical assistance or support, in the United States and Canada, call

the Technical Service Center's Toll Fraud Intervention Hotline at

1-800-643-2353.

How to Get Help

For additional support telephone numbers, go to the Avaya Web site:

http://www.avaya.com/support/

If you are:

• within the United States, click Escalation Lists

• outside the United States, click Escalation Lists then Global

Escalation List, for phone numbers for regional Centers of

Excellence.

Providing Telecommunications Security

Telecommunications security (of voice, data, and/or video communi-

cations) is the prevention of any type of intrusion to (that is, either

unauthorized or malicious access to or use of) your company's tele-

communications equipment by some party.

Your company's “telecommunications equipment” includes both this

Avaya product and any other voice/data/video equipment that could be

accessed via this Avaya product (that is, “networked equipment”).

An “outside party” is anyone who is not a corporate employee, agent,

subcontractor, or is not working on your company's behalf. Whereas, a

“malicious party” is anyone (including someone who may be other-

wise authorized) who accesses your telecommunications equipment

with either malicious or mischievous intent.

Such intrusions may be either to/through synchronous (time-multi-

plexed and/or circuit-based) or asynchronous (character-, message-, or

packet-based) equipment or interfaces for reasons of:

• Utilization (of capabilities special to the accessed equipment)

• Theft (such as, of intellectual property, financial assets, or toll

facility access)

• Eavesdropping (privacy invasions to humans)

• Mischief (troubling, but apparently innocuous, tampering)

• Harm (such as harmful tampering, data loss or alteration,

regardless of motive or intent)

Be aware that there may be a risk of unauthorized intrusions associ-

ated with your system and/or its networked equipment. Also realize

that, if such an intrusion should occur, it could result in a variety of

losses to your company (including but not limited to, human/data pri-

vacy, intellectual property, material assets, financial resources, labor

costs, and/or legal costs).

Responsibility for Your Company’s Telecommunications Security

The final responsibility for securing both this system and its net-

worked equipment rests with you - Avaya’s customer system adminis-

trator, your telecommunications peers, and your managers. Base the

fulfillment of your responsibility on acquired knowledge and

resources from a variety of sources including but not limited to:

• Installation documents

• System administration documents

• Security documents

• Hardware-/software-based security tools

• Shared information between you and your peers

• Telecommunications security experts

To prevent intrusions to your telecommunications equipment, you and

your peers should carefully program and configure:

• Your Avaya-provided telecommunications systems and their

• interfaces

• Your Avaya-provided software applications, as well as their

• underlying hardware/software platforms and interfaces

• Any other equipment networked to your Avaya products.

Voice Over Internet Protocol (VoIP)

If the equipment supports Voice over Internet Protocol (VoIP) facili-

ties, you may experience certain compromises in performance, reli-

ability and security, even when the equipment performs as warranted.

These compromises may become more acute if you fail to follow

Avaya's recommendations for configuration, operation and use of the

equipment. YOU ACKNOWLEDGE THAT YOU ARE AWARE OF

THESE RISKS AND THAT YOU HAVE DETERMINED THEY

ARE ACCEPTABLE FOR YOUR APPLICATION OF THE EQUIP-

MENT. YOU ALSO ACKNOWLEDGE THAT, UNLESS

EXPRESSLY PROVIDED IN ANOTHER AGREEMENT, YOU

ARE SOLELY RESPONSIBLE FOR (1) ENSURING THAT YOUR

NETWORKS AND SYSTEMS ARE ADEQUATELY SECURED

AGAINST UNAUTHORIZED INTRUSION AND (2) BACKING

UP YOUR DATA AND FILES.

Standards Compliance

Avaya Inc. is not responsible for any radio or television interference

caused by unauthorized modifications of this equipment or the substi-

tution or attachment of connecting cables and equipment other than

those specified by Avaya Inc. The correction of interference caused by

such unauthorized modifications, substitution or attachment will be

the responsibility of the user. Pursuant to Part 15 of the Federal Com-

munications Commission (FCC) Rules, the user is cautioned that

changes or modifications not expressly approved by Avaya Inc. could

void the user’s authority to operate this equipment.

Product Safety Standards

This product complies with and conforms to the following interna-

tional Product Safety standards as applicable:

Safety of Information Technology Equipment, IEC 60950, 3rd Edition

including all relevant national deviations as listed in Compliance with

IEC for Electrical Equipment (IECEE) CB-96A.

Safety of Information Technology Equipment, CAN/CSA-C22.2

No. 60950-00 / UL 60950, 3rd Edition

Safety Requirements for Customer Equipment, ACA Technical Stan-

dard (TS) 001 - 1997

One or more of the following Mexican national standards, as applica-

ble: NOM 001 SCFI 1993, NOM SCFI 016 1993, NOM 019 SCFI

1998

The equipment described in this document may contain Class 1

LASER Device(s). These devices comply with the following stan-

dards:

EN 60825-1, Edition 1.1, 1998-01

21 CFR 1040.10 and CFR 1040.11.

The LASER devices operate within the following parameters:

• Maximum power output: -5 dBm to -8 dBm

• Center Wavelength: 1310 nm to 1360 nm

Luokan 1 Laserlaite

Klass 1 Laser Apparat

Use of controls or adjustments or performance of procedures other

than those specified herein may result in hazardous radiation expo-

sures. Contact your Avaya representative for more laser product infor-

mation.

Electromagnetic Compatibility (EMC) Standards

This product complies with and conforms to the following interna-

tional EMC standards and all relevant national deviations:

Limits and Methods of Measurement of Radio Interference of Infor-

mation Technology Equipment, CISPR 22:1997 and EN55022:1998.

Information Technology Equipment – Immunity Characteristics –

Limits and Methods of Measurement, CISPR 24:1997 and

EN55024:1998, including:

• Electrostatic Discharge (ESD) IEC 61000-4-2

• Radiated Immunity IEC 61000-4-3

• Electrical Fast Transient IEC 61000-4-4

• Lightning Effects IEC 61000-4-5

• Conducted Immunity IEC 61000-4-6

• Mains Frequency Magnetic Field IEC 61000-4-8

• Voltage Dips and Variations IEC 61000-4-11

• Powerline Harmonics IEC 61000-3-2

• Voltage Fluctuations and Flicker IEC 61000-3-3

Federal Communications Commission Statement

Part 15:

For MCC1, SCC1, G600, and CMC1 Media Gateways:

For the G700 Media Gateway:

Part 68: Answer-Supervision Signaling. Allowing this equipment to

be operated in a manner that does not provide proper answer-supervi-

sion signaling is in violation of Part 68 rules. This equipment returns

answer-supervision signals to the public switched network when:

• answered by the called station,

• answered by the attendant, or

• routed to a recorded announcement that can be administered by

the customer premises equipment (CPE) user.

This equipment returns answer-supervision signals on all direct

inward dialed (DID) calls forwarded back to the public switched tele-

phone network. Permissible exceptions are when:

• a call is unanswered

• a busy tone is received

• a reorder tone is received.

Avaya attests that this registered equipment is capable of providing

users access to interstate providers of operator services through the use

of access codes. Modification of this equipment by call aggregators to

block access dialing codes is a violation of the Telephone Operator

Consumers Act of 1990.

For MCC1, SCC1, G600, and CMC1 Media Gateways:

This equipment complies with Part 68 of the FCC rules. On the rear of

this equipment is a label that contains, among other information, the

FCC registration number and ringer equivalence number (REN) for

this equipment. If requested, this information must be provided to the

telephone company.

For the G700 Media Gateway:

This equipment complies with Part 68 of the FCC rules and the

requirements adopted by the ACTA. Located prominently on this

equipment is a label that contains, among other information, a product

identifier in the format US:AAAEQ##TXXXX. The digits represented

by ## are the ringer equivalence number (REN) without a decimal

point (for example, 03 is a REN of 0.3). If requested, this number must

be provided to the telephone company.

The REN is used to determine the quantity of devices which may be

connected to the telephone line. Excessive RENs on the telephone line

may result in devices not ringing in response to an incoming call. In

most, but not all areas, the sum of RENs should not exceed 5.0. To be

certain of the number of devices that may be connected to a line, as

determined by the total RENs, contact the local telephone company.

REN is not required for some types of analog or digital facilities.

Note: This equipment has been tested and found to comply with

the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable pro-

tection against harmful interference when the equipment is oper-

ated in a commercial environment. This equipment generates,

uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause

harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interfer-

ence in which case the user will be required to correct the inter-

ference at his own expense.

Note: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable pro-

tection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that radio inter-

ference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician

for help.

Means of Connection

Connection of this equipment to the telephone network is shown in the

following tables.

For MCC1, SCC1, G600, and CMC1 Media Gateways:

For the G700 Media Gateway:

If the terminal equipment (for example, the MultiVantage™ Solution

equipment) causes harm to the telephone network, the telephone com-

pany will notify you in advance that temporary discontinuance of ser-

vice may be required. But if advance notice is not practical, the

telephone company will notify the customer as soon as possible. Also,

you will be advised of your right to file a complaint with the FCC if

you believe it is necessary.

The telephone company may make changes in its facilities, equipment,

operations or procedures that could affect the operation of the equip-

ment. If this happens, the telephone company will provide advance

notice in order for you to make necessary modifications to maintain

uninterrupted service.

If trouble is experienced with this equipment, for repair or warranty

information, please contact the Technical Service Center at

1-800-242- 2121 or contact your local Avaya representative. If the

equipment is causing harm to the telephone network, the telephone

company may request that you disconnect the equipment until the

problem is resolved.

A plug and jack used to connect this equipment to the premises wiring

and telephone network must comply with the applicable FCC Part 68

rules and requirements adopted by the ACTA. A compliant telephone

cord and modular plug is provided with this product. It is designed to

be connected to a compatible modular jack that is also compliant. It is

recommended that repairs be performed by Avaya certified techni-

cians.

The equipment cannot be used on public coin phone service provided

by the telephone company. Connection to party line service is subject

to state tariffs. Contact the state public utility commission, public ser-

vice commission or corporation commission for information.

This equipment, if it uses a telephone receiver, is hearing aid compati-

ble.

Canadian Department of Communications (DOC) Interference

Information

For MCC1, SCC1, G600, and CMC1 Media Gateways:

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe A est conforme à la norme

NMB-003 du Canada.

For the G700 Media Gateway:

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme

NMB-003 du Canada.

This equipment meets the applicable Industry Canada Terminal Equip-

ment Technical Specifications. This is confirmed by the registration

number. The abbreviation, IC, before the registration number signifies

that registration was performed based on a Declaration of Conformity

indicating that Industry Canada technical specifications were met. It

does not imply that Industry Canada approved the equipment.

DECLARATIONS OF CONFORMITY

United States FCC Part 68 Supplier’s Declaration of Conformity

(SDoC)

Avaya Inc. in the United States of America hereby certifies that the

equipment described in this document and bearing a TIA TSB-168

label identification number complies with the FCC’s Rules and Regu-

lations 47 CFR Part 68, and the Administrative Council on Terminal

Attachments (ACTA) adopted technical criteria.

Avaya further asserts that Avaya handset-equipped terminal equip-

ment described in this document complies with Paragraph 68.316 of

the FCC Rules and Regulations defining Hearing Aid Compatibility

and is deemed compatible with hearing aids.

Copies of SDoCs signed by the Responsible Party in the U. S. can be

obtained by contacting your local sales representative and are avail-

able on the following Web site:

http://www.avaya.com/support/

All MultiVantage™ system products are compliant with FCC Part 68,

but many have been registered with the FCC before the SDoC process

was available. A list of all Avaya registered products may be found at:

http://www.part68.org/

by conducting a search using “Avaya” as manufacturer.

Manufacturer’s Port

Identifier FIC Code SOC/REN/

A.S. Code Network

Jacks

Off/On premises station OL13C 9.0F RJ2GX,

RJ21X,

RJ11C

DID trunk 02RV2-T 0.0B RJ2GX,

RJ21X

CO trunk 02GS2 0.3A RJ21X

02LS2 0.3A RJ21X

Tie trunk TL31M 9.0F RJ2GX

Basic Rate Interface 02IS5 6.0F, 6.0Y RJ49C

1.544 digital interface 04DU9-BN 6.0F RJ48C,

RJ48M

04DU9-IKN 6.0F RJ48C,

RJ48M

04DU9-ISN 6.0F RJ48C,

RJ48M

120A3 channel service unit 04DU9-DN 6.0Y RJ48C

Manufacturer’s Port

Identifier FIC Code SOC/REN/

A.S. Code Network

Jacks

Ground Start CO trunk 02GS2 0.5A RJ11C

DID trunk 02RV2-T AS.0 RJ11C

Loop Start CO trunk 02LS2 0.5A RJ11C

1.544 digital interface 04DU9-BN 6.0Y RJ48C

04DU9-DN 6.0Y RJ48C

04DU9-IKN 6.0Y RJ48C

04DU9-ISN 6.0Y RJ48C

Basic Rate Interface 02IS5 6.0F RJ49C

European Union Declarations of Conformity

Avaya Inc. declares that the equipment specified in this document

bearing the “CE” (Conformité Europeénne) mark conforms to the

European Union Radio and Telecommunications Terminal Equipment

Directive (1999/5/EC), including the Electromagnetic Compatibility

Directive (89/336/EEC) and Low Voltage Directive (73/23/EEC). This

equipment has been certified to meet CTR3 Basic Rate Interface (BRI)

and CTR4 Primary Rate Interface (PRI) and subsets thereof in CTR12

and CTR13, as applicable.

Copies of these Declarations of Conformity (DoCs) can be obtained

by contacting your local sales representative and are available on the

following Web site:

http://www.avaya.com/support/

Japan

For MCC1, SCC1, G600, and CMC1 Media Gateways:

This is a Class A product based on the standard of the Voluntary Con-

trol Council for Interference by Information Technology Equipment

(VCCI). If this equipment is used in a domestic environment, radio

disturbance may occur, in which case, the user may be required to take

corrective actions.

For the G700 Media Gateway:

This is a Class B product based on the standard of the Voluntary Con-

trol Council for Interference by Information Technology Equipment

(VCCI). If this equipment is used in a domestic environment, radio

disturbance may occur, in which case, the user may be required to take

corrective actions.

To order copies of this and other documents:

Call: Avaya Publications Center

Voice 1.800.457.1235 or 1.207.866.6701

FAX 1.800.457.1764 or 1.207.626.7269

Write: Globalware Solutions

200 Ward Hill Avenue

Haverhill, MA 01835 USA

Attention: Avaya Account Management

E-mail: totalwar[email protected]om

Contents

Issue 5 October 2002 7555-233-119

Volume One

About this Book 21

■Purpose 21

■Intended Audience 21

■Organization 22

■Conventions Used In This Document 23

■Safety Precautions 24

■Security Issues 24

■Standards Compliance 25

■Electromagnetic Compatibility Standards 26

■Trademarks and Service Marks 27

■How to Order Documentation 28

■How to Comment on This Document 28

■Where to Call for Technical Support 29

1 Maintenance for CSI systems 31

■How to use the Maintenance book 31

■CSI design 37

■Circuit Packs 40

■Maintenance Objects 40

■Alarm and Error Reporting 41

■Maintenance Testing 42

■Preventive Maintenance Procedures 45

■Recovery 47

■Set Neon Voltage (Ring Ping) 51

■Logging On/Off 52

■Procedure for SPE-Down Mode 63

■Reseating/Replacing Circuit Packs 65

■Removing Power 66

Contents

555-233-1198Issue 5 October 2002

■Restoring Power 67

■System Backup 69

■Troubleshooting Features 73

■Install DS1 CPE Loopback Jack (T1 Only) 96

■LED Interpretation 110

■Multimedia Call Handling 115

■TN760D Tie Trunk Option Settings 124

■TN464E/F/GP Option Settings 126

■ATM Tips 127

■Unusual ATM trouble conditions 151

■Troubleshooting Multimedia Call Handling (MMCH) 154

2 Maintenance Commands 161

■System Command Structure 161

■busyout access-endpoint 162

■busyout board 163

■busyout cdr-link 165

■busyout data-module 166

■busyout journal-printer 167

■busyout link 168

■busyout mis 169

■busyout pms-link 170

■busyout port 172

■busyout pri-endpoint 173

■busyout sp-link 174

■busyout station 174

■busyout tdm 175

■busyout tone-clock 176

■busyout trunk 177

■cancel hardware-group 179

■change circuit-packs 179

■change firmware download 181

■change ip-network-region 182

Contents

Issue 5 October 2002 9555-233-119

■change synchronization 184

■change system-parameters maintenance 185

■clear audits 196

■clear errors 197

■clear interface 197

■clear isdn-testcall 197

■clear link 198

■clear mst 198

■clear pkt 198

■clear port 198

■disable administered-connection 199

■disable filesystem board ppcss 199

■disable firmware download 199

■disable mst 199

■disable suspend-alm-orig 200

■disable synchronization-switch 200

■disable test-number 201

■display alarms 201

■display capacity 206

■display communication-interface hop-channels 216

■display communication-interface links 217

■display disabled-tests 219

■display errors 219

■display events 226

■display failed ip-network-region 241

■display firmware download 241

■display initcauses 242

■display memory-configuration 244

■display node-names 245

■display port 247

■display synchronization 248

■display system-parameters duplication 249

■display system-parameters maintenance 250

■display test-schedule 260

■display time 263

Contents

555-233-11910 Issue 5 October 2002

■download update-file 264

■enable administered-connection 267

■enable filesystem board 267

■enable mst 267

■enable suspend-alm-orig 268

■enable synchronization-switch 269

■enable test-number 269

■get boot-image 269

■get ethernet-options 271

■get vector 272

■list communication-interface processor-channel 274

■list configuration 276

■list configuration license 279

■list configuration software-version 280

■list directory 284

■list disabled-mos 284

■list external-device alarm 285

■list history 286

■list ip-route 289

■list isdn-testcall 290

■list marked-ports 291

■list measurements clan ethernet 292

■list measurements clan ppp 294

■list measurements clan sockets 296

■list measurements ds-1 298

■list measurements ip codec 302

■list measurements ip dsp-resource 306

■list measurements ip-signaling-group 309

■list mst 312

■list registered-ip-stations 336

■list skill-status 336

■list station 338

■list suspend-alm-orig 339

■list sys-link 340

■list testcalls 341

Contents

Issue 5 October 2002 11555-233-119

■list trace 346

■mark port 348

■monitor bcms 349

■monitor health 353

■monitor security-violations 356

■monitor system 357

■monitor traffic 362

■monitor trunk 364

■netstat arp 365

■netstat ip-route 368

■ping 369

■recycle carrier 373

■refresh route-table 373

■release access-endpoint 375

■release board 376

■release cdr-link 377

■release data-module 378

■release journal-printer 379

■release link 380

■release mis 381

■release modem-pool 381

■release pms-link 382

■release port 383

■release pri-endpoint 384

■release sp-link 385

■release station 386

■release tdm 387

■release tone-clock 388

■release trunk 389

■remove file 390

■remove license 390

■reset board 391

■reset io-processor 392

■reset interface 392

■reset ip-endpoints 393

Contents

555-233-11912 Issue 5 October 2002

■reset login-session n 393

■reset packet-interface 393

■reset switch-control 394

■reset system 394

■reset system 3 395

■reset translation-id 396

■reset val 396

■restore announcements 397

■resume hardware-group 399

■save announcements 399

■save translation 402

■set boot-image 403

■set ethernet-options 404

■set options 405

■set signaling-group 411

■set synchronization 411

■set tdm 412

■set time 413

■set tone-clock 414

■set vector 414

■status access-endpoint 415

■status administered-connection 417

■status attendant 418

■status audits 419

■status bri-port 427

■status card-mem 433

■status cdr-link 437

■status cleared-alarm-notif 438

■status conference 438

■status data-module 474

■status esm 476

■status firmware download 477

■status hardware-group 478

■status health 480

■status interface 483

Contents

Issue 5 October 2002 13555-233-119

■status ip-board 483

■status ip-network-region 486

■status isdn-testcall 487

■status journal-link 489

■status link n 490

■status logins 494

■status packet-interface 495

■status pms-link 496

■status pri-endpoint 497

■status processor-channel 499

■status psa 500

■status signaling-group 500

■status sp-link 503

■status station 504

■status synchronization 509

■status sys-link 511

■status system 513

■status trunk 517

■status tsc-administered 521

■status tti 522

■status val-ip 524

■test access-endpoint 525

■test alarms 526

■test analog-testcall 532

■test board 534

■test card-mem 537

■test cdr-link 540

■test customer-alarm 542

■test data-module 544

■test ds1-loop 545

■test eda-external-device-alrm 548

■test environment 549

■test failed ip-network-region 552

■test firmware download 552

■test hardware-group 553

Contents

555-233-11914 Issue 5 October 2002

■test inads-link 559

■test interface 561

■test isdn-testcall 563

■test journal-printer 565

■test license 567

■test led 568

■test memory 569

■test network-control 571

■test pkt 573

■test packet-interface 575

■test pms-link 576

■test port 578

■test pri-endpoint 580

■test processor 582

■test signaling-group 584

■test sp-link 586

■test station 588

■test synchronization 590

■test sys-link 592

■test tdm 594

■test tone-clock 596

■test trunk 598

■test tsc-administered 600

■traceroute 601

■upgrade software 603

3 Maintenance Objects 607

■ADM-CONN (Administered Connection) 607

■ADX8D-BD (AUDIX Circuit Pack) 612

■ADX8D-PT (AUDIX Digital Port) 613

■ADX16D-B (16 Port AUDIX Circuit Pack) 621

■ADX16A-BD (AUDIX Circuit Pack) 622

■ADX16D-P (16-Port AUDIX Digital Port) 623

Contents

Issue 5 October 2002 15555-233-119

■ADX16A-PT (AUDIX Analog Line/Control Link) 631

■ALARM-PT (ALARM PORT) 638

■ANL-24-L (24-Port Analog Line) 639

■ANL-BD (Analog Line Circuit Pack) 655

■ANL-LINE (8-Port Analog Line),

ANL-NE-L (8-Port Neon Analog Line) 656

■AN-LN-PT (Analog Line

Port) 675

■ANN-BD (Announcement Circuit Pack) 694

■ANN-PT (Announcement Port) 712

■ANNOUNCE (Announce) 723

■ATM-BCH (ATM B-Channel Trunk) 727

■ATM-DCH (ATM D-Channel Port) 741

■ATM-INTF (TN2305/6) 744

■ATM-SGRP (ATM Signaling Group) 747

■ATM-TRK (Circuit Emulation Service Circuit Pack) 758

■AXA12-BD/ADX8D-BD/AXD12-BD

(AUDIX Circuit Packs) 787

■AXA12-RS/ADX8D-RS/AXD12-RS

(AUDIX Reserve Slots) 788

■BRI-BD/LGATE-BD (ISDN-BRI Line Circuit Pack) 789

■BRI-DAT (ISDN-BRI) 796

■BRI-PORT (ISDN-BRI Port),

ABRI-PORT (ASAI ISDN-BRI Port) 797

■BRI-SET, ASAI-ADJ, BRI-DAT 819

■CABINET (Cabinet Sensors) 846

■CAP-MEM (Memory Card Capacity) 852

■CARD-MEM (Memory Card) 855

■CLAN-BD (Control LAN Circuit Pack) 875

■CLSFY-BD (Call Classifier Circuit Pack) 891

■CLSFY-PT (Call Classifier Port) 891

■CO-BD (Central Office Trunk Circuit Pack) 897

■CO-DS1 (DS1 CO Trunk) 898

■CO-TRK (CO Trunk) 914

■CONFIG (System Configuration) 940

■CUST-ALM (Customer-Provided Alarming Device) 941

Contents

555-233-11916 Issue 5 October 2002

Volum e Two

■DATA-BD (Data Channel Processor Circuit Pack) 945

■DATA-CHL (Data Channel) 950

■DATA-CON (Network Control Driver) 975

■DAT-LINE (Data Line) 977

■DETR-BD (International Version) 985

■DID-BD (Direct Inward Dial Trunk Circuit Pack) 985

■DID-DS1 (DS1 DID Trunk) 986

■DID-TRK (DID Trunk) 997

■DIG-BD (Digital Line Circuit Pack) 1013

■DIG-IP-STN (Digital IP Station) 1014

■DIG-LINE (Digital Line) 1021

■DIOD-DS1 (DS1 DIOD Trunk) 1046

■DIOD-TRK (DIOD Trunk), DIOD-BD

(DIOD Circuit Pack) 1056

■DIOD-TRK (DIOD Trunk) 1056

■DLY-MTCE (MO-DAILY) 1066

■DS1-BD (DS1 Interface Circuit Pack) 1069

■DT-LN-BD (Data Line Circuit Pack) 1145

■DTMR-PT [Dual Tone Multifrequency Port (TTR)] 1146

■E-DIG-BD (Multi Application Platform Board) 1151

■E-DIG-STA (Emulated Digital Line) 1152

■EMG-XFER 1162

■ERR-LOG (Error Log) 1165

■ETH-PT (Control LAN Ethernet) 1166

■ETR-PT (Enhanced Tone Receiver Port) 1177

■EXT-DEV ADMIN? N (External Device Alarm) 1184

■EXT-DEV ADMIN? Y (External Device Alarm) 1187

■FW-DWNLD (Firmware Download) 1190

■GPTD-PT [General Purpose Tone

Detector Port (CPTR)] 1220

■H323-BCH (H.323 B-Channel) 1221

■H323-SGRP (323 Signaling Group) 1223

■H323-STN (H.323 IP Station) 1230

■HYB-BD (Hybrid Line Circuit Pack) 1236

Contents

Issue 5 October 2002 17555-233-119

■HYB-LINE (Hybrid Line) 1236

■INADS (INADS Link) 1258

■IO-PROCR (I/O Processor) 1262

■IPMEDPRO (IP Media Processor Circuit Pack) 1265

■ISDN-PLK (ISDN-PRI Signaling Link Port) 1281

■ISDN-SGR (ISDN-PRI Signaling Group) 1287

■ISDN-TRK (DS1 ISDN Trunk) 1303

■LIC-ERR (License-Error Mode) 1331

■LOG-SVN (Login Security Violation) 1339

■JNL-PRNT (Journal Printer Link) 1341

■MAPD-BD (MAPD Interface Circuit Pack TN802) 1342

■MAPD-RES (TN802 reserve slot) 1373

■MEDPRO (Media Processor MAPD Circuit Pack) 1374

■MEDPROPT (TN802/TN2302 MED PRO DSP PORT) 1387

■MIS (Management Information System) 1395

■MMI-BD 1396

■MMI-LEV (Multimedia Interface Resource Level) 1405

■MMI-PT 1408

■MMI-SYNC 1414

■NO-LIC (No License) 1416

■NR-CONN (Network-Region Connect) 1419

■OPS-LINE (DS1 OPS Line) 1422

■PE-BCHL (PRI Endpoint Port) 1434

■PKT-BUS (Packet Bus) 1454

■PKT-INT (Packet Interface) 1462

■PMS-LINK (Property Management System Link) 1482

■PMS-PRNT/JNL-PRNT (PMS Printer Link) 1490

■PPP-PT (Control LAN Packet/Port) 1496

■PR-MAINT (Maintenance Processor) 1509

■PR-MEM (RISC Memory) 1523

■PRI-CDR/SEC-CDR (PRI-CDR Link) 1530

■PROCR (RISC Processor Circuit Pack TN2402/TN798) 1537

■PROC-SAN (Process Sanity Audits) 1544

■RANL-STA (Remote Analog Line

(Station) Port) 1545

Contents

555-233-11918 Issue 5 October 2002

■RDIG-STA (Remote Digital Station) 1554

■REM-OFF (Remote Office) 1568

■RING-GEN (Analog Ring Generator) 1570

■S-SYN-BD (Speech Synthesis Circuit Pack) 1574

■S-SYN-PT (Speech Synthesis Port) 1575

■SEC-CDR (SEC-CDR Link Maintenance) 1587

■SW-CTL (Switch Control) 1588

■SYNC (Synchronization) 1596

■SYS-LINK (System Links) 1603

■SYS-PRNT (System Printer) 1608

■SYSTEM (System) 1614

■TBRI-BD (TN2185

ISDN Trunk-Side BRI) 1616

■TBRI-PT (TN2185

ISDN Trunk-Side BRI Port) 1624

■TBRI-TRK (TN2185

ISDN Trunk-Side BRI) 1644

■TDMODULE (Trunk Data Module) 1655

■TDM-BUS (TDM Bus) 1656

■TDM-CLK (TDM Bus Clock) 1667

■TIE-BD (Tie Trunk Circuit Pack) 1676

■TIE-DS1 (DS1 Tie Trunk) 1677

■TIE-TRK (Tie Trunk) 1694

■TIME-DAY (Time of Day) 1716

■TONE-BD (Tone-Clock Circuit Pack) 1718

■TONE-PT (Tone Generator) 1729

■TRANS-ID (Translation-ID) 1737

■TR-LN-BD (Trunk Line

Board) 1742

■TSC-ADM (Administered Temporary

Signaling Connections) 1743

■TTR-LEV (TTR Level) 1749

■UDS1-BD (UDS1 Interface Circuit Pack) 1753

■VAL-BD (Voice Announcements

over LAN Circuit Pack) 1857

■VAL-PT (Voice Announcements over LAN Packet/Port) 1879

Contents

Issue 5 October 2002 19555-233-119

■VC-BD 1884

■VC-DSPPT 1888

■VC-LEV (Voice Conditioner

DSP Port Level) 1896

■VC-SUMPT 1899

■WAE-PORT (Wideband Access Endpoint Port) 1904

■XXX-BD (Common Port Circuit Pack) 1911

IN Index 1925

Contents

555-233-11920 Issue 5 October 2002

Page is loading ...

Avaya DEFINITY Server CSI Maintenance Manual

Related papers

Other documents