Wirepath WP-ONE-ENCL-SHELF Owner's manual

Wirepath ONE™

Enclosure Shelf

Overview

Thank you for purchasing a great product from Wirepath Structured Wiring. The Wire-

path ONE™ Media Shelf is designed to provide stability and exibility for your equipment

installation.

Two shelves are included with each purchase. Each can be mounted on the Mounting

Platform or the Module Attachment Holes.

Features

A - Wire Management Insert - Keep it tidy! Direct your wiring through the insertion point

to clear up some shelf space.

B - Zip Tie Tab - Keep the wires taught! Use the zip tie tab to keep wiring from getting in

the way. The tab sits ush until it’s ready for use. Pull the tab forward with pliers to have

a zip tie reach around the tab.

C - Support Bars - Keep it secure! Use diagonal cutters to release the support bars,

which can hold your equipment in place. Pushing up from below, raise the bars to vertical,

then insert equipment.

D - Mounting Hooks - Keep it locked in! Use these hooks to keep the shelf in place

and even on the rear module attachment holes. If mounting on a platform, use pliers to

recess the center hook into the vertical support.

Rev: 140627-1600www.snapav.com Support: 800.838.5052

Limited Lifetime Warranty

This Wirepath Product has a Lifetime Limited Warranty. This warranty includes parts and labor

repairs on all components found to be defective in material or workmanship under normal

conditions of use. This warranty shall not apply to products that have been abused, modied,

or disassembled. Products to be repaired under this warranty must be returned to SnapAV

or a designated service center with prior notication and an assigned return authorization

number (RA).

Lifetime