EA630 Boot Case
V1.1
How to put on the boot case with EA630
1). Slip the EA630 into the bottom of the boot case.
Snap in the top corner.
2). Attach Additonal Edges, make sure EA630 is secured
with the boot case.
How to remove the boot case with EA630
1). Push one edge of the top corner by both hands, and
firmly pry the case apart from EA630.
2). Grab EA630 to pull it out.
http://www.ute.com/
Cop ght 2020 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
Quick Start Guide
yri
-
1
