Unitech HT330 User guide

HT330
Unitech
Brand
Unitech
Model
HT330
Category
Power banks
Type
User guide

Unitech HT330 is a versatile and user-friendly device that offers a range of features to enhance your productivity. With its single slot cradle design, you can easily charge your HT330 terminal with or without the boot case or gun grip. The cradle also comes with a detachable part that allows you to charge a spare battery simultaneously. The LED indicators provide clear status updates, displaying power and battery charging information. Whether you're in the office or on the go, the HT330 cradle ensures your device stays powered and ready for use.

Unitech HT330 is a versatile and user-friendly device that offers a range of features to enhance your productivity. With its single slot cradle design, you can easily charge your HT330 terminal with or without the boot case or gun grip. The cradle also comes with a detachable part that allows you to charge a spare battery simultaneously. The LED indicators provide clear status updates, displaying power and battery charging information. Whether you're in the office or on the go, the HT330 cradle ensures your device stays powered and ready for use.

HT330 Single Slot Cradle
Quick Start Guide
V1.0
Package
How to Remove the Detachable Part
How to Use HT330 Single Slot Cradle
Please make sure the following contents are in the
HT330 gift box.
If something is missing or damaged, please contact
your Unitech representative.
The Package Contents
Optional Accessories
•HT330 Single Slot Cradle
(with detachable part)
•12V/2A Adaptor for Cradle
(P/N# 1010-900052G)
•3 Pins Power Cord (US) for Cradle
(P/N# 1010-601551G)
•3 Pins Power Cord (EU) for Cradle
(P/N# 1550-602333G)
•3 Pins Power Cord (UK) for Cradle
(P/N# 1550-602689G)
There are two options to charge HT330 terminal:
1. Charge HT330 without the boot case after
installing the detachable part.
2. Please remove the detachable part before
charging under the following conditions:
Grab the two grooves on top of the detachable
part and bent both edge inward, then hold and
pull it up to remove.
How to Install the Detachable Part
Insert the detachable part until you hear a click
sound. Make sure the arrows of the detachable
Part matches with arrows of the cradle.
Charge HT330 with Boot Case on
Charge HT330 with Gun Grip
LED Indicator Status
HT330 single slot Charging/USB cradle Comparison
Product View
HT330 Single Slot Cradle
HT330 Single Slot
Charging Cradle
(5000-900098G)
HT330 Single Slot
USB Cradle
(5000-900099G)
Power LED Battery Charging
Status LED
LED type LED Status Description
Power LED Blue light Power on
LED off Power off
Battery Charging
Status LED
Red light Battery
Charging
LED off Battery
fully
charged
P/N Models Description Rear View
5000-900098G HT330 1-Slot Charging Cradle
with spare Battery Slot
Charging terminal via DC jack
5000-900099G HT330 1-Slot USB Cradle with
spare Battery Slot
Charging terminal via DC jack
Data transfer by USB type-C
between terminal and PC
To ensure the unit working properly, please keep all connectors away
from the contaminants staying inside of them such as dust, grease, mud,
and water. The negligence may cause the unit with no communication,
short circuited, overheated and so on. If the connector is damaged,
please ensure the connector is being fully repaired before using the
unit to avoid causing short circuited.
WARNING!
There is a risk of fire and burns if the battery is handled improperly.
DO NOT disassemble, crush, puncture, short external contacts,
or dispose the battery pack in fire or water.
DO NOT attempt to open or service the battery.
Dispose used batteries according to local recycling guidelines in your area.
CAUTION!
Copyright 2022 unitech Electronics Co., Ltd. All rights reserved.
Unitech is a registered trademark of Unitech Electronics Co., Ltd.
http://www.ute.com/
  • Page 1 1
  • Page 2 2

Unitech HT330 User guide

HT330
Unitech
Brand
Unitech
Model
HT330
Category
Power banks
Type
User guide

Unitech HT330 is a versatile and user-friendly device that offers a range of features to enhance your productivity. With its single slot cradle design, you can easily charge your HT330 terminal with or without the boot case or gun grip. The cradle also comes with a detachable part that allows you to charge a spare battery simultaneously. The LED indicators provide clear status updates, displaying power and battery charging information. Whether you're in the office or on the go, the HT330 cradle ensures your device stays powered and ready for use.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents